Back to Product List
Class Number Description
6225-01
FUSEHOLDER ASSEMBLIES - Fuseholder Assemblies

.style2 {
border-width: 0;
margin-right: 0px;
}

(Replaces:

May 11, 2015)

COVERAGE:

Fuseholder assemblies, adapters for Type S fuses and
the current-carrying parts pertaining thereto mounted on bases of suitable
insulating material.

Fuseholder assemblies included in this category are
intended to accept only plug fuses, including Type S fuses, not exceeding 30
amperes and 125 volts, cartridge fuses not exceeding 600 amperes and 600 volts,
and HRC fuses not exceeding 6000 amperes and 600 volts.

Also included are fuseholders in the form of either
single- or multi-fuse assemblies used in the construction of such devices as
enclosed switches or panel-boards, industrial control assemblies and fuse
reducers.

Fuseholders listed in this class are suitable for
installation in equipment as follows:


End-Use Product Type

Compliance with spacing requirements as noted
below

Power Distribution

For plug type fuseholders complying with C22.2
No. 4248.11

Power Distribution

For cartridge type fuseholders complying with
Table C1 of Annex C in C22.2 No. 4248.1 for power distribution equipment

Industrial Control ? Power Circuits

For plug type fuseholders complying with C22.2
No. 4248.11

Industrial – Power Circuits

For cartridge type fuseholders complying with
Table C1 of Annex C in C22.2 No. 4248.1 for power distribution equipment
or Industrial – Power Circuits

Industrial – Control Circuits

For plug type fuseholders complying with C22.2
No. 4248.11and cartridge type fuseholders complying with Table C1 of
Annex C in C22.2 No. 4248.1


See class 6225 30 for Component Accepted fuseholders
and fuseholder assemblies evaluated to other specific end product standards or
for which additional evaluation is required.

REQUIREMENTS:

CSA-C22.2 No. 0 General Requirements – Canadian Electrical Code, Part II
CSA C22.2 No. 39 Fuseholder Assemblies
CSA C22.2 No. 106 HRC-Miscellaneous fuses
CSA C22.2 No. 248.1 Low Voltage Fuses – Part 1: General Requirements
CSA-C22.2 No. 248.2 Low Voltage Fuses – Part 2: Class "C" Fuses
CSA-C22.2 No. 248.3 Low Voltage Fuses – Part 3: Class "CA" and "CB" Fuses
CSA-C22.2 No. 248.4 Low Voltage Fuses – Part 4: Class "CC" Fuses
CSA-C22.2 No. 248.5 Low Voltage Fuses – Part 5: Class "G" Fuses
CSA-C22.2 No. 248.6 Low Voltage Fuses – Part 6: Class "H" Non-Renewable Fuses
CSA-C22.2 No. 248.7 Low Voltage Fuses – Part 7: Class "H" Renewable Fuses
CSA C22.2 No. 248.8 Low Voltage Fuses – Part 8: Class "J" Fuses
CSA-C22.2 No. 248.9 Low Voltage Fuses – Part 9: Class "K" Fuses
CSA C22.2 No. 248.10 Low Voltage Fuses – Part 10: Class "L" Fuses
CSA C22.2 No. 248.11 Low Voltage Fuses – Part 11: Plug Fuses
CSA C22.2 No. 248.12 Low Voltage Fuses – Part 12: Class "R" Fuses
CSA-C22.2 No. 248.14 Low Voltage Fuses – Part 14: Supplemental Fuses
CSA-C22.2 No. 248.15 Low Voltage Fuses – Part 15: Class "T" Fuses
CSA C22.2 No. 4248.1 Fuseholders ? General Requirements
CSA C22.2 No. 4248.4-07 Fuseholders ? Class CC
CSA C22.2 No. 4248.5-07 Fuseholders ? Class G
CSA C22.2 No. 4248.6-07 Fuseholders ? Class H
CSA C22.2 No. 4248.8-07 Fuseholders ? Class J
CSA C22.2 No. 4248.9-07 Fuseholders ? Class K
CSA C22.2 No. 4248.11-07 Fuseholders ? Type C (Edison Base) and Type S (Plug Fuses)
CSA C22.2 No. 4248.12-07 Fuseholders ? Class R
CSA C22.2 No. 4248.15-07 Fuseholders ? Class T


MARKING:

  • submittor's identification;
  • complete electrical rating;
  • additional markings as may be required;
  • CSA Mark

/cl