Codes & Standards
B196.3-M1983 (R2021)
PVC Underground Telecommunication Cable Ducting and Fittings
- English, French
- Published in 1983
- Reaffirmed in 2021
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA B137:23 SERIES A PACKAGE
CSA B137:23 PE and PVC Piping Systems for Water Package - Consists of CSA B137.0:23, Definitions, general requirements, and methods of testing for thermoplastic pressure piping; CSA B137.1:23, Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services; CSA B137.2:23, Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications; CSA B137.3:23, Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications; CSA B137.3.1:23, Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications and CSA B137.9:23, Polyethylene/aluminum/polyethylene (PE- AL-PE) composite pressure-pipe systems
- English
- Published in 2023
- Published by CSA Group
Codes & Standards
CSA B137:23 SERIES B PACKAGE
CSA B137:23 Piping Systems for Plumbing & Hydronics Package - Consists of CSA B137.0:23, Definitions, general requirements, and methods of testing for thermoplastic pressure piping; CSA B137.5:23, Crosslinked polyethylene (PEX) tubing systems for pressure applications; CSA B137.6:23, Chlorinated polyvinylchloride (CPVC) pipe, tubing, and fittings for hot-and cold-water distribution systems; CSA B137.10:23, Crosslinked polyethylene/aluminum/crosslinked polyethylene (PEX-AL-PEX) composite pressure-pipe systems; CSA B137.11:23 - Polypropylene (PP-R & PP-RCT) pipe and fittings for pressure applications and CSA B137.18:23, Polyethylene of raised temperature resistance (PE-RT) tubing systems for pressure applications
- English
- Published in 2023
- Published by CSA Group
Codes & Standards
CSA B137:23 SERIES C PACKAGE
CSA B137:23 PE, PA and PEX Piping Systems for Gas Package - Consists of CSA B137.0:23, Definitions, general requirements, and methods of testing for thermoplastic pressure piping; CSA B137.4:23, Polyethylene (PE) piping systems for gas services; CSA B137.4.1:23, Electrofusion-type polyethylene (PE) fittings for gas services; CSA B137.12:23, Polyamide (PA) piping systems for gas services and CSA B137.19:23, Crosslinked polyethylene (PEX) piping systems for gas services
- English
- Published in 2023
- Published by CSA Group
Codes & Standards
CSA B137:23 SERIES PACKAGE
Thermoplastic Pressure Piping Standards Package - Consists of all the CSA B137:23 standards
- English
- Published in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
ISO 10146:2019
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
- English
- Published in 2019
- Published by ISO
Codes & Standards - Purchase
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
- English, French
- Published in 2011
- Published by ISO
Codes & Standards - Purchase
ISO 10466:2021
Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
- English
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 10468:2023
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
- English, French
- Published in 2023
- Published by ISO
Codes & Standards - Purchase
ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
- English
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design
- English, French
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 10508:2006/Amd 1:2018
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 10952:2021
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
- English
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 11173:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-4:2018/Amd 1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
- English, French
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
- English, French
- Published in 2019
- Published by ISO
Codes & Standards - Purchase
ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-4:2021
Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes
- English, French
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 11299-1:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11299-3:2018
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method
- English, French
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces
- English, French
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 11673:2005
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties
- English, French
- Published in 2005
- Published by ISO
Codes & Standards - Purchase
ISO 11922-1:2018
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
- English
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11922-2:1997
Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 12091:1995
Structured-wall thermoplastics pipes -- Oven test
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient
- English, French
- Published in 2009
- Published by ISO
Codes & Standards - Purchase
ISO 12176-1:2017
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
- English, French
- Published in 2017
- Published by ISO
Codes & Standards - Purchase
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion
- English, French
- Published in 2008
- Published by ISO
Codes & Standards - Purchase
ISO 12176-2:2008/Amd 1:2021
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1
- English
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 12176-3:2011
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
- English, French
- Published in 2011
- Published by ISO
Codes & Standards - Purchase
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding
- English, French
- Published in 2003
- Published by ISO
Codes & Standards - Purchase
ISO 12176-5:2021
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
- English
- Published in 2021
- Published by ISO