Product List
Refine Results
Language
-
English
147
Product type
-
Bundle
1
-
Publication
146
Sub-type
-
Amendment
19
-
Redline
1
-
Standard
127
Publication year
Publisher
-
CSA Group
2
-
ISO
145
Purchase type
-
Retail
145
-
Subscription
1
Status
-
Active
147
View 1-20 of 155
View 20 | View 100
No Results Found
Codes & Standards
B167-16 (R2021) Standard + Redline
Overhead cranes, gantry cranes, monorails, hoists, and jib cranes
- English
- Published in 2016
- Reaffirmed in 2021
- Published by CSA Group
Codes & Standards
B196.3-M1983 (R2021)
PVC Underground Telecommunication Cable Ducting and Fittings
- English, French
- Published in 1983
- Reaffirmed in 2021
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
- English, French
- Published in 2011
- Published by ISO
Codes & Standards - Purchase
ISO 10508:2006
Plastics piping systems for hot and cold water installations -- Guidance for classification and design
- English, French
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 10508:2006/Amd 1:2018
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 10928:2016
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
- English
- Published in 2016
- Published by ISO
Codes & Standards - Purchase
ISO 10952:2021
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
- English
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11296-4:2018/Amd 1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
- English, French
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes
- English, French
- Published in 2019
- Published by ISO
Codes & Standards - Purchase
ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks -- Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11298-4:2021
Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes
- English, French
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 11299-1:2018
Plastics piping systems for renovation of underground gas supply networks -- Part 1: General
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 11299-3:2018
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
- English, French
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method
- English, French
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces
- English, French
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient
- English, French
- Published in 2009
- Published by ISO
Codes & Standards - Purchase
ISO 12176-1:2017
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion
- English, French
- Published in 2017
- Published by ISO
Codes & Standards - Purchase
ISO 12176-2:2008
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion
- English, French
- Published in 2008
- Published by ISO
Codes & Standards - Purchase
ISO 12176-2:2008/Amd 1:2021
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1
- English
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 12176-3:2011
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge
- English, French
- Published in 2011
- Published by ISO
Codes & Standards - Purchase
ISO 12176-4:2003
Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding
- English, French
- Published in 2003
- Published by ISO
Codes & Standards - Purchase
ISO 12176-5:2021
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
- English
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
ISO 13260:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading
- English, French
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
- English, French
- Published in 2017
- Published by ISO
Codes & Standards - Purchase
ISO 13262:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam
- English, French
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 13263:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength
- English, French
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 13264:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings
- English, French
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 13265:2010
Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
- English, French
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 13266:2022
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
ISO 13267:2022
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
ISO 13268:2022
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
ISO 13272:2011
Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations
- English, French
- Published in 2011
- Published by ISO
Codes & Standards - Purchase
ISO 13761:2017
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
- English
- Published in 2017
- Published by ISO