B137 A PACKAGE-17
PE and PVC Piping Systems for Water Package - Consists of B137.0-17, Definitions, general requirements, and methods of testing for thermoplastic pressure piping; B137.1-17, Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services; B137.2-17, Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications; B137.3-17, Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications; B137.3.1-17, Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications and B137.9-17, Polyethylene/aluminum/polyethylene (PE- AL-PE) composite pressure-pipe systems
détails du produit
B137 A PACKAGE-17 Consists of:
B137.0-17 - Definitions, general requirements, and methods of testing for thermoplastic pressure piping
Preface
This is the tenth edition of CSA B137.0, Definitions, general requirements, and methods of testing for thermoplastic pressure piping. It supersedes the previous editions published in 2013, 2009, 2005, 2002, 1999, 1993, 1986, 1981, and 1973.
This Standard was initially published as part of CSA B137 Series-17, Thermoplastic pressure piping compendium. It was reissued as a stand-alone Standard in January 2019.
CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0.
Scope
1.1
This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general requirements for materials, manufactured pipe and fittings, relevant test methods, and marking requirements.
Note: The terms pipe and piping, as well as tube and tubing, are used interchangeably in the CSA B137 Series.
1.2
This Standard is intended to be used in conjunction with one of the other Standards in the CSA B137 Series to form a complete Standard for a particular product.
1.3
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
--------------------------------------------------------------------------------------------------------------------------------
B137.1-17 - Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services
Preface
This is the tenth edition of CSA B137.1, Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services, which supersedes the previous editions published in 2013, 2009, 2005, 2002, 1999, 1995, 1989, 1983, and 1970.
This Standard was initially published as part of CSA B137 Series-17, Thermoplastic pressure piping compendium. It was reissued as a stand-alone Standard in January 2019.
CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0.
Scope
1.1
This Standard covers polyethylene (PE) pipe, tubing, and fittings for use in potable cold water supply services or other applications such as water-based ground source geothermal systems.
1.2
This Standard specifies requirements for materials, quality of work, dimensions, sustained pressure, environmental stress cracking, and markings.
1.3
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
--------------------------------------------------------------------------------------------------------------------------------
B137.2-17 - Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications
Preface
This is the eighth edition of CSA B137.2, Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications, which supersedes the previous editions published in 2013, 2009, 2005, 2002, 1999, 1993, and 1989.
This Standard was initially published as part of CSA B137 Series-17, Thermoplastic pressure piping compendium. It was reissued as a stand-alone Standard in January 2019.
CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0.
Scope
1.1
This Standard covers rigid polyvinylchloride (PVC) injection-moulded fittings that have gasketed joints and are intended for use in pressure applications such as water mains, water service piping, process piping, and fire lines. Fittings covered by this Standard are suitable for use with PVC pipes having outside diameter dimensions of cast iron pipe. Only one pressure rating, 1620 kPa at 23 °C (PC 235), is covered in this Standard and is suitable for use with compatible outside diameter PVC pipes having a dimension ratio (DR) of 18 or more.
Note: Where PVC fittings are to be used in applications other than those involving water, the manufacturer should be consulted.
1.2
This Standard specifies requirements for materials, quality of work, long-term performance under sustained hydrostatic pressure, dimensions, markings, and injection-moulding quality.
1.3
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
--------------------------------------------------------------------------------------------------------------------------------
B137.3-17 - Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications
Preface
This is the twelfth edition of CSA B137.3, Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications, which supersedes the previous editions published in 2013, 2009, 2005, 2002, 1999, 1993, 1990, 1986, 1981, 1972, and 1970.
This Standard was initially published as part of CSA B137 Series-17, Thermoplastic pressure piping compendium. It was reissued as a stand-alone Standard in January 2019.
CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0.
Scope
1.1
This Standard covers rigid polyvinylchloride (PVC) pipe and fittings intended for use in pressure applications such as water mains, water service piping, and process piping. The fittings covered by this Standard include moulded, solvent-cemented, gasketed, or threaded fittings, and fittings that have been fabricated for use with any joining method.
Note: Where PVC pipe and fittings are to be used in non-water applications, the manufacturer should be consulted.
1.2
This Standard specifies requirements for materials, quality of work, dimensions, solvent cement, and markings for pipe and fittings. Requirements for hydrostatic sustained pressure, extrusion, impact resistance, and quality are also specified for pipe.
1.3
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
--------------------------------------------------------------------------------------------------------------------------------
B137.3.1-17 - Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications
Preface
This is the third edition of CSA B137.3.1, Molecularly oriented polyvinylchloride (PVCO) pipe for pressure applications, which supersedes the previous editions published in 2013 and 2009.
This Standard was initially published as part of CSA B137 Series-17, Thermoplastic pressure piping compendium. It was reissued as a stand-alone Standard in January 2019.
CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0.
Scope
1.1
This Standard covers molecularly oriented polyvinylchloride (PVCO) pipe intended for use in pressure applications such as water mains, sewer force mains, and process piping.
Note: This Standard does not address chemical compatibility between PVCO pipe and process fluids. Where PVCO pipe is to be used in non-water applications, the manufacturer should be consulted.
1.2
PVCO complying with this Standard is not suitable for solvent cementing and is intended to be joined by gasketed joints.
1.3
This Standard specifies requirements for materials, quality of work, dimensions, markings, hydrostatic sustained pressure, extrusion, impact resistance, and quality for PVCO pipe.
1.4
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
--------------------------------------------------------------------------------------------------------------------------------
B137.9-17 - Polyethylene/aluminum/polyethylene (PE- AL-PE) composite pressure-pipe systems
Preface
This is the eighth edition of CSA B137.9, Polyethylene/aluminum/polyethylene (PE-AL-PE) composite pressure-pipe systems, which supersedes the previous editions published in 2013, 2009, 2005, 2002, 1999, 1998, and 1991.
This Standard was initially published as part of CSA B137 Series-17, Thermoplastic pressure piping compendium. It was reissued as a stand-alone Standard in January 2019.
CSA B137.0 provides requirements and test methods that are common to some or all of the Standards of the CSA B137 series. Wherever possible, individual Standards make reference to the relevant clauses in CSA B137.0.
Scope
1.1
This Standard covers polyethylene/aluminum/polyethylene (PE-AL-PE) macrocomposite pipe consisting of a welded aluminum tube laminated by a melt adhesive to layers of polyethylene (PE) inside and outside the aluminum tube. The pipes covered in this Standard are pressure rated for 1380 kPa at 23 °C, 1035 kPa at 60 °C, or 690 kPa at 82 °C.
Systems are intended for use in potable water distribution systems or other applications, including municipal water service lines, reclaimed water distribution, radiant panel heating systems, hydronic baseboard heating systems, snow and ice melting systems, building services piping, compressed air distribution, ground source geothermal systems, underground irrigation, and compressed gas distribution (not including fuel gases), provided that the PE-AL-PE systems comply with the applicable code requirements. Residential and commercial systems are included.
Note: The complete structure, consisting of the aluminum, melt adhesive, and layers of PE intimately bonded together, is known as pipe. For the purposes of this Standard, the layer of welded aluminum, or the internal or external layer of PE, is known as a tube. Tubes, intimately bonded together by the melt adhesive, form a pipe.
1.2
The Standard specifies requirements for materials, quality of work, dimensions, thermocycling resistance, sustained pressure performance, delamination resistance, and marking.
Notes:
1) In developing the hydrostatic design basis for PE-AL-PE pipes, in accordance with CSA B137.0, pressure has been substituted for fibre stress.
2) The pressure rating of PE-AL-PE pipes is contingent on the thickness of the aluminum metal reinforcing layer. Pipes having the same dimension ratio but different metal reinforcing layer thicknesses will have different pressure ratings. The dimension ratio therefore cannot be used, as it is with homogeneous walled pipes, to assess changes in pressure rating with wall thickness variation.
1.3
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.