Intended Use
This Standard is intended to assist code enforcement officials and purchasers of steel building systems in determining the suitability and quality of steel buildings.
Because the manufacturer of these buildings is often remote from the building site and buildings are frequently sold through a dealer or contractor, and because local code enforcement officials may lack the capability to check the structural analysis of a building, problems may occur in determining the acceptability of such structures. It is the intent of this Standard and the accompanying certification program to help alleviate such problems.
This Standard requires that the manufacturer's production facilities, staff, and quality assurance systems be capable of reliably producing acceptable steel buildings. To ensure that these design and production capabilities are met and maintained, the Standard requires a manufacturing facility to be certified by a certification agency. In turn, the manufacturer certifies each building for a specific location by means of a certificate of design and manufacturing conformance, signed and sealed by a qualified professional engineer. This certificate lists key design criteria for review by code enforcement officials.
Preface
This is the third edition of CSA A660, Certification of manufacturers of steel building systems. It supersedes the previous editions, published in 2004 and 1991.
Scope
1.1
This Standard applies to the certification of manufacturers of steel building systems.
1.2
This Standard prescribes the procedure for certification based on an audit of a manufacturer's plants and facilities by the certification body.
1.3
This Standard provides the requirements for a certificate of design and manufacturing conformance for each steel building system supplied by a certified manufacturer (see Clause 12). Note: This should not be construed as third-party certification of the steel building system.
1.4
Inspection of the structure in its final erected state is outside the scope of this Standard.
Note: Inspection and approval requirements are under the jurisdiction of applicable building authorities.
1.5
In CSA Standards, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; may is used to express an option or that which is permissible within the limits of the standard; and can is used to express possibility or capability.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
An update to this product is available.
To receive notifications when an amendment, new edition or update is available to your standard no matter how you purchased it, please register on the Standards Update Service. After registering, enter the List ID for the relevant standard. The List ID can be found in the “CSA Standards Update” section within the first few pages of the standard you’ve purchased. Once notified, you can then update your standard accordingly.
PDF Format Purchased from the CSA Store
If you have purchased or subscribed to a standard from the CSA Store in PDF format, login to your CSA OnDemandTM account to access the updated PDF.
Paper Format Purchased or Purchased from Reseller
If you have purchased a paper copy of the standard from the CSA Store or purchased a standard in paper or PDF format from one of our resellers, login to the Standards Update Service to download the updates in PDF format.
eBook Format Purchased
If you have purchased a standard in eBook format, login to the CSA Reader App to download the updated version of the standard.
Request Copyright Permissions
