Codes & Standards - Purchase
ISO 15638-20:2020
Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 20: Weigh-in-motion monitoring
- English
- Published in 2020
- Published by ISO
Codes & Standards
GAS TRADE 1 PACKAGE (7th ed. pub. 2022) - Ontario Version
The Gas Trade Training Materials (1): Advanced program above 400k BTU consists of units 26 through 31 and CSA B149.3:20, Code for the field approval of fuel-burning appliances and equipment.
- English
- Published in 2022
- Published by CSA Group
Codes & Standards
GAS TRADE 1 PACKAGE (7th ed. pub. 2020)
The Gas Trade Training Materials (1): Advanced program above 400k BTU consists of units 26 through 31 and CSA B149.3:20, Code for the field approval of fuel-burning appliances and equipment.
- English
- Published in 2020
- Published by CSA Group
Codes & Standards - Purchase
IEC TS 62600-20:2019
Marine energy - Wave, tidal, and other water current converters - Part 20: Design and analysis of an Ocean Thermal Energy Conversion (OTEC) plant - General guidance
- English
- Published in 2019
- Published by IEC
Codes & Standards - Purchase
ISO 16000-20:2014
Indoor air -- Part 20: Detection and enumeration of moulds -- Determination of total spore count
- English, French
- Published in 2014
- Published by ISO
Codes & Standards - Purchase
IEC 61322:2020
Radiation protection instrumentation - Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV
- Bilingual
- Published in 2020
- Published by IEC
Codes & Standards - Purchase
ISO 15500-20:2015
Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 20: Rigid fuel line in material other than stainless steel
- English
- Published in 2015
- Published by ISO
Codes & Standards - Purchase
ISO 21083-1:2018
Test method to measure the efficiency of air filtration media against spherical nanomaterials -- Part 1: Size range from 20 nm to 500 nm
- English, French
- Published in 2018
- Published by ISO
Codes & Standards
CSA C22.2 NO. 60601-2-20:23
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators (Adopted IEC 60601-2-20:2020, third edition, 2020-09, with Canadian deviations) | Appareils électromédicaux — Partie 2-20 : Exigences particulières pour la sécurité de base et les performances essentielles des incubateurs de transport pour nouveau-nés (norme IEC 60601-2-20:2020 adoptée, troisième édition, 2020-09, avec exigences propres au Canada)
- Bilingual
- Published in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
IEC 60601-2-20:2020/AMD1:2023
Amendment 1 - Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- Bilingual
- Published in 2023
- Published by IEC
Codes & Standards - Purchase
IEC 60601-2-20:2020+AMD1:2023 CSV
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- Bilingual
- Published in 2023
- Published by IEC
Codes & Standards - Purchase
IEC 60601-2-20:2020
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- English, French
- Published in 2020
- Published by IEC
Codes & Standards - Purchase
IEC 60601-2-20:2020 RLV
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
- English
- Published in 2020
- Published by IEC
Codes & Standards - Purchase
IEC 62908-12-20:2019
Touch and interactive displays - Part 12-20: Measuring methods of touch displays - Multi-touch performance
- English
- Published in 2019
- Published by IEC
Codes & Standards - Purchase
IEC TS 60076-20:2017/COR1:2018
Corrigendum 1 - Power transformers - Part 20: Energy efficiency
- English
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
IEC TS 60076-20:2017
Power transformers - Part 20: Energy efficiency
- English
- Published in 2017
- Published by IEC
Codes & Standards - Purchase
IEC 63009:2019
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 20 kHz to 500 kHz
- Bilingual
- Published in 2019
- Published by IEC
Codes & Standards - Purchase
ISO 13584-20:1998/Cor 1:2014
Industrial automation systems and integration -- Parts library -- Part 20: Logical resource: Logical model of expressions -- Technical Corrigendum 1
- English
- Published in 2014
- Published by ISO
Codes & Standards
CSA ISO/IEC 13818-1A:20
Amendment 1:2020 to CSA ISO 13818-1:20, Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems - Amendment 1: Carriage of JPEG XS in MPEG-2 TS (Adopted amendment 1:2020 to ISO/IEC 13818-1:2019)
- English
- Published in 2020
- Published by CSA Group
Codes & Standards - Purchase
ISO 5667-20:2008
Water quality -- Sampling -- Part 20: Guidance on the use of sampling data for decision making -- Compliance with thresholds and classification systems
- English
- Published in 2008
- Published by ISO
Codes & Standards - Purchase
ISO 13584-20:1998
Industrial automation systems and integration -- Parts library -- Part 20: Logical resource: Logical model of expressions
- English
- Published in 1998
- Published by ISO
Codes & Standards
CSA ISO/IEC 20000-2A:20
Amendment 1:2021 to CSA ISO/IEC 20000-2:20, Information technology - Service management - Part 2: Guidance on the application of service management systems - Amendment 1 (Adopted amendment 1:2020 to ISO/IEC 20000-2:2019)
- English
- Published in 2021
- Published by CSA Group
Codes & Standards - Purchase
ISO 6993-2:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
- English
- Published in 2006
- Published by ISO
Codes & Standards
CSA/ANSI Z21.20:22/CSA C22.2 NO. 60730-2-5:22
Automatic electrical controls — Part 2-5: Particular requirements for automatic electrical burner control systems (Binational standard with CSA/ANSI Z21.20:22 and UL 60730-2-5)
- English, French
- Published in 2022
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
ISO 13761:2017
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
- English
- Published in 2017
- Published by ISO
Codes & Standards - Purchase
ISO 7240-20:2010
Fire detection and alarm systems -- Part 20: Aspirating smoke detectors
- English
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 20766-20:2019
Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 20: Filter unit
- English
- Published in 2019
- Published by ISO
Codes & Standards - Purchase
ISO/IEC 10164-20:1999/Cor 1:2002
Information technology — Open Systems Interconnection — Systems Management: Time management function — Part 20: — Technical Corrigendum 1
- English, French
- Published in 2002
- Published by ISO/IEC
Codes & Standards
CSA ISO 8100-20:21
Lifts for the transport of persons and goods – Part 20: Global essential safety requirements (GESRs) (Adopted ISO 8100-20:2018, first edition, 2018-08)
- English
- Published in 2021
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
ISO 3262-20:2021
Extenders — Specifications and methods of test — Part 20: Fumed silica
- English, French
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
IEC 60749-20:2020
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
- Bilingual
- Published in 2020
- Published by IEC
Codes & Standards - Purchase
IEC 61076-8-100:2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
- Bilingual
- Published in 2020
- Published by IEC
Codes & Standards - Purchase
IEC 60749-20:2020 RLV
Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
- English
- Published in 2020
- Published by IEC
Codes & Standards - Purchase
ISO 23537-1:2022
Requirements for sleeping bags — Part 1: Thermal, mass and dimensional requirements for sleeping bags designed for limit temperatures of -20°C and higher
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
IEC 61558-2-20:2022
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
- Bilingual
- Published in 2022
- Published by IEC
Codes & Standards - Purchase
ISO/TS 6336-20:2022
Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
- English, French
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
IEC 61558-2-20:2022 RLV
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors
- English
- Published in 2022
- Published by IEC
Codes & Standards
CSA Z23500:20 PACKAGE
Consists of CSA Z23500-1:20, Preparation and quality management of fluids for haemodialysis and related therapies — Part 1: General requirements (Adopted ISO 23500-1: 2019, first edition, 2019-02, withCanadian deviations); CSA Z23500-2:20, Preparation and quality management of fluids for haemodialysis and related therapies — Part 2: Water treatment equipment for haemodialysis applications and related therapies (Adopted ISO 23500-2:2019, first edition, 2019-02, with Canadian deviations); CSA Z23500-3:20, Preparation and quality management of fluids for haemodialysis and related therapies — Part 3: Water for haemodialysis and related therapies (Adopted ISO 23500-3:2019, first edition, 2019-02, with Canadian deviations); CSA Z23500-4:20, Preparation and quality management of fluids for haemodialysis and related therapies —Part 4: Concentrates for haemodialysis and related therapies (Adopted ISO 23500-4:2019, first edition, 2019-02, with Canadian deviations) and CSA Z23500-5:20, Preparation and quality management of fluids for haemodialysis and related therapies — Part 5: Quality of dialysis fluid for haemodialysis and related therapies (Adopted ISO 23500-5:2019, first edition, 2019-02, with Canadian deviations)
- English, French
- Published in 2020
- Published by CSA Group
Codes & Standards - Purchase
IEC 60749-20-1:2019
Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
- Bilingual
- Published in 2019
- Published by IEC
Codes & Standards - Purchase
IEC 60749-20-1:2019 RLV
Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
- English
- Published in 2019
- Published by IEC
Codes & Standards - Purchase
IEC 60404-6:2018
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- Bilingual
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
IEC 60331-2:2018
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
- English, French
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
IEC 60331-1:2018
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
- English, French
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
IEC 60404-6:2018 RLV
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- English
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
IEC 60331-2:2018 RLV
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
- English
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
ISO 8100-20:2018
Lifts for the transport of persons and goods — Part 20: Global essential safety requirements (GESRs)
- English
- Published in 2018
- Published by ISO
Codes & Standards - Purchase
IEC 60331-1:2018 RLV
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
- English
- Published in 2018
- Published by IEC
Codes & Standards - Purchase
IEC 60404-6:2018/COR1:2018
Corrigendum 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- Bilingual
- Published in 2018
- Published by IEC
Codes & Standards
CSA B149.3:20
Code for the field approval of fuel-burning appliances and equipment. Includes complimentary CSA B149.3:20 Overview online training ($99 value).
- English
- Published in 2020
- Published by CSA Group
- Subscription Available
- Available as CSA Advantage™
Codes & Standards
CSA ISO/IEC 14496-22A:20
Amendment 1:2021 to CSA ISO/IEC 14496-22:20, Information technology - Coding of audio-visual objects - Part 22: Open font format - Amendment 1: Color font technology and other updates (Adopted amendment 1:2020 to ISO/IEC 14496-22:2019)
- English
- Published in 2021
- Published by CSA Group
Codes & Standards - Purchase
ISO 8254-3:2016
Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method
- English
- Published in 2016
- Published by ISO
Codes & Standards - Purchase
IEC 60404-6:2018/AMD1:2021
Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- Bilingual
- Published in 2021
- Published by IEC
Codes & Standards - Purchase
ISO 7668:2021
Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°
- English, French
- Published in 2021
- Published by ISO
Codes & Standards - Purchase
IEC 60404-6:2018+AMD1:2021 CSV
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- Bilingual
- Published in 2021
- Published by IEC
Codes & Standards - Purchase
ISO 22915-12:2015
Industrial trucks -- Verification of stability -- Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer
- English, French
- Published in 2015
- Published by ISO
Codes & Standards - Purchase
ISO 22915-9:2014
Industrial trucks -- Verification of stability -- Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer
- English, French
- Published in 2014
- Published by ISO
Codes & Standards - Purchase
ISO 13803:2014
Paints and varnishes -- Determination of haze on paint films at 20 degrees
- English, French
- Published in 2014
- Published by ISO
Codes & Standards - Purchase
IEC TR 61788-20:2014
Superconductivity - Part 20: Superconducting wires - Categories of practical superconducting wires - General characteristics and guidance
- English
- Published in 2014
- Published by IEC
Codes & Standards - Purchase
ISO 2813:2014
Paints and varnishes -- Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
- English, French
- Published in 2014
- Published by ISO
Codes & Standards - Purchase
IEC 60906-2:2011
IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
- Bilingual
- Published in 2011
- Published by IEC
Codes & Standards - Purchase
ISO/IEC 14496-20:2008/Cor 1:2010
Information technology -- Coding of audio-visual objects -- Part 20: Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) -- Technical Corrigendum 1
- English
- Published in 2010
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 14496-20:2008/Amd 2:2010
Information technology -- Coding of audio-visual objects -- Part 20: Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) -- Amendment 2: Technology for scene adaptation
- English
- Published in 2010
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 14496-20:2008/Amd 3:2010
Information technology -- Coding of audio-visual objects -- Part 20: Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) -- Amendment 3: Presentation and Modification of Structured Information (PMSI)
- English
- Published in 2010
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 14496-20:2008/Amd 1:2009
Information technology -- Coding of audio-visual objects -- Part 20: Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) -- Amendment 1: Extensions to support SVGT1.2
- English
- Published in 2009
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 14496-5:2001/Amd 20:2009
Information technology -- Coding of audio-visual objects -- Part 5: Reference software -- Amendment 20: MPEG-1 and -2 on MPEG-4 reference software and BSAC extensions
- English
- Published in 2009
- Published by ISO/IEC
Codes & Standards - Purchase
IEC 61935-2-20:2008
Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications
- English, French
- Published in 2008
- Published by IEC
Codes & Standards - Purchase
ISO 1924-2:2008
Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method (20 mm/min)
- English, French
- Published in 2008
- Published by ISO
Codes & Standards - Purchase
IEC 60068-2-20:2008
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
- English, French
- Published in 2008
- Published by IEC
Codes & Standards - Purchase
ISO/IEC 14496-20:2008
Information technology -- Coding of audio-visual objects -- Part 20: Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF)
- English
- Published in 2008
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/TS 10993-20:2006
Biological evaluation of medical devices -- Part 20: Principles and methods for immunotoxicology testing of medical devices
- English
- Published in 2006
- Published by ISO