Customer Class File Number
Lithonia Lighting A Division of Acuity Holdings Inc
c/o Acuity Lighting Group Inc
One Lithonia Way
Conyers
Georgia
United States
30012
3402-86
LUMINAIRES - LED - Recessed Type - Certified to US Stds
222826

To the requirements of
UL 1598 (Fifth Edition; Reprint with revisions through and including

LED Cylinder Downlight with 4‑inch aperture, Dry, Damp, or Wet Location, Surface Ceiling Mount Luminaire with optional Pendant, Wall, Aircraft Cable, or Yoke Mounting, provided with Class 2 LED driver. Offered with multiple LED Lamp Arrays each consisting of a single COB LED array. Also offered Remote Driver Box (RDB) Option

Model(s)Input Rating
ICO CYL 4120 ‑ 277V or 347V, 60 Hz

LED Cylinder Downlight with 4‑inch aperture, Dry, Damp, or Wet Location, Surface Ceiling Mount Luminaire with optional Surface, Pendant, Aircraft Cable, Wall, and Wall Tilt Rotate Mounting, provided with Class 2 LED driver. Offered with multiple LED Lamp Arrays each consisting of a single COB LED array.

Model(s)Input Rating
ICO4120 ‑ 277V or 347V, 60 Hz

LED Cylinder Downlight with 4‑inch square aperture, Dry, or Damp Location, Surface Ceiling Mount Luminaire, provided with Class 2 LED driver. Offered with multiple LED Lamp Arrays each consisting of a single COB LED array.

Model(s)Input Rating
ICO CYL SQ 4120 ‑ 277V or 347V, 60 Hz

LED Cylinder Downlight with up to 3 adjustable heads, Dry or Damp Location, Surface Ceiling Mount Luminaire, provided with Class 2 LED driver.

Model(s)Input Rating
ICO4 ADJ CYL 1x, 2x, 3x120‑277V or 347V, 60Hz

To the requirements of
CSA C22.2 NO. 250.0:21 (Reprint with revisions through and including June 18, 2021), UL 1598 (Fifth Edition; Reprint with revisions through and including June 18, 2021)

PART‑E: Recessed wall or ceiling luminaires ‑ General: a) Luminaires construction already accepted in submittor’s report 191274 – 1803122; b) Luminaires employing LED light source are similar to models in submittor’s 191274 ‑ 1803122. Except provided with an appropriate heat sink, light‑emitting‑diode (LED) array and power source.

Section‑1e: Light‑emitting‑diode (LED) luminaire with class 2, Class P constant current driver.

Model(s)Input Rating
E$1x*#-?. i ; E$10x*#-?. i with array type S## – CC&& – **120 or 277 or 347V, 60Hz

Section‑2e: Light‑emitting‑diode (LED) luminaire with Class 2 output, Class P constant current driver.

Model(s)Input Rating
E$1x*#-?. i ; E$12x*#-?. i with array type M## – CC&& –**120 or 277 or 347V, 60 Hz

Section‑3e: Light‑emitting‑diode (LED) luminaire with Class 2, Class P constant voltage driver.

Model(s)Input Rating
E$1x*#-?. i with array type M## – CV&& –**120 or 277 or 347V, 60 Hz

Section‑4e: Organic light‑emitting‑diode (OLED) luminaire with Class 2 constant current driver or constant voltage. Ceiling mount only.

Model(s)Input Rating
E$1x*#-?. i with array type O## – ??&& – **120 or 277V, 60Hz

Section‑5e: Light‑emitting‑diode (LED) luminaire with Recessed driver enclosure with one Class 2, Class P LED driver, Cable Suspended Surface Luminaire with Type IC inherently protected mounting box

Model(s)Input Rating
C4049-X, where X can be 6, 10 or 18120 to 277,V 60Hz, 20 W max.

NOTES:

 

Codification for LED array type: $## – ??&& – **

 

            $:         Printed wiring board format

                                    -S: Single diode

                                    -M: Multiple diodes

                                    -O: OLED Panel

            ##:       Number total of diodes

            ??:        Power supply type

                                    -CC: constant current

                                    -CV: constant voltage

            &&:     Maximum current (A) or voltage (V)

            **:       Approximate wattage (W) of each diode

 

Codification for wall and ceiling Luminaires: $x*#-?.i

 

$:   one letter to denote Eureka Product Division;

No letter: standard products;

S: top line products;

C: custom products.

7: Linear products.

DC: Product uses a DC to DC driver.

x:   model

                              three digits number if $ = nothing (000 to 999)

four digits number if $ = C or S (0000 to 9999)

*:    one letter (A to Z) to denote design release:

                               No letter:  first release

                               B:  second release;

                    etc.

#:   one letter for the country where the products are approved:

C=      Canada

U=     United States

Nothing for both.

?:    one digit to denote size of luminaire in cm when necessary.

i:    four digits number to denote color finish.

 

Note: OLED model is from 120- 277Vac max with constant current or voltage, class 2 LED drivers only.

To the requirements of
UL 1598 (Fifth Edition; Reprint with revisions through and including June 18, 2021)

Type non‑IC, 6 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Location, and Class 2 output. Offered with multiple LED Lamp Arrays consisting from 10 to 64 LEDs, and seven different Finishing Section trims, one is a non‑adjustable downlight, Cat. No. EVO YY/ZZZ 6xx, one is a wall‑washer trim, Cat. No. EVO WW YY/ZZZ 6xx, one is a non‑conductive shower trim that includes an acrylic molded lens bonded to the reflector, Cat. No. EVO YY/ZZZ 6xx DFx, one is a high lumen trim, Cat. No. EVO YY/ZZZ 6xx RFD156186, with a larger aperture and neck to accommodate a higher lumen light engine, one is EVO PDRG YY/ZZZ 6xx which includes a semi‑recessed decorative colored glass diffuser, one is EVO VWD, a shorter trim for a wide beam and the other is a test switch Trim, Cat No. EVO YY/ZZZ 6xx EL for use with Emergency Battery option.

Model(s)Input Rating
EVO YY/ZZZ 6xx, EVO SURG, EVO PRT or EVO FSD YY/ZZ 6xx120V to 277V input or 347V input, 60 Hz, Type NON‑IC
EVO YY/ZZZ 6xx HAO120V to 277V input or 347V input, 60 Hz, Type NON‑IC, permitted to be marked as suitable for 40C ambient.
EVO YY/ZZZ 6xx CP, EVO SURG, EVO PRT or EVO FSD YY/ZZ 6xx CP120V to 277V input or 347V input, 60 Hz, Type NON‑IC, designed for requirements to meet CCEC for Chicago Plenum option.
EVO YY/ZZZ 6xx RD,  EVO SURG, EVO PRT or EVO FSDYY/ZZ 6xx RD120V to 277V input or 347V input, 60 Hz, Type NON‑IC, connected to a Remote Driver Assembly, 120V to 277V input, 60 Hz and Class 2 output, with an LED Lamp Array consisting of a max of 16 LEDs and 300mA maximum drive current.
EVO YY/ZZZ 6xx RDB120V to 277V input or 347V input, 60 Hz, Type NON‑IC, connected to a Remote Driver Box, 120V to 277V input, 60 Hz and Class 2 output.

Model(s)Input Rating
EVO YY/ZZZ 6xx NAT120V to 277V input or 347V input, 60 Hz, Type IC, designed for Natatorium requirements with an LED Lamp Array consisting of a max of 16 LEDs and 325mA maximum drive current.

May be offered with optional Single Fusing (SF) or optional Occupancy Sensor/Dimming (NEPP) & (DMXR) device.   This unit is also offered with an optional Emergency Lighting Battery Pack (EL/ELR).  This unit may also be offered with an optional Listed UL (US) Generator Transfer Device (GTD).   The GTD Option is NOT offered on units with a 347 Volt input or with the EL/ELR option. Offered with various nLight control options.  This unit may also be offered with an optional Bi-Level Dimming Module (BLD) for 120-277V applications.

  

“YY” in Cat.No. denotes Color Temperature or Range, “ZZ” denotes Lumen Value and “xx” denotes Trim Color. Suffixes could be added (numbers and/or letters) to denote Trim Type, Distribution, Finish, Voltage, Options, Etc.

Note:

  1. Please refer to Report 70047209 to address additional alternate components and/or requirements for LED Recessed luminaires.
  2. Catalog No EVO SURG is representative of the following Catalog Nos.  EVO6SG, EVO6P, EVO6FS, EVO6SH, and EVO6CR
  3. All Catalog Nos in the file may be followed by addition suffixes that represent non-safety related product modifications. 
  4. Catalog Nos are equivalent and represent each other as follows:

 

Currently Listed Catalog Number

Equivalent Catalog Number

EVO YY/ZZZ 6xx, EVO YY/ZZZ 6xx CP, EVO YY/ZZZ 6xx RD

EVO6 YY/ZZZ 6xx, EVO6 YY/ZZZ 6xx CP, EVO6 YY/ZZZ 6xx RD

EVO SURG, EVO SURG CP, EVO PRT RD

EVO6SG, EVO6SG CP, EVO6P RD

EVO PRT, EVO PRT CP

EVO6P, EVO6P CP

EVO FSD YY/ZZ 6xx, EVO FSD YY/ZZ 6xx CP, EVO FSDYY/ZZ 6xx RD

EVO6FS YY/ZZ 6xx, EVO6FS YY/ZZ 6xx CP, EVO6FS YY/ZZ 6xx RD

EVO YY/ZZZ 6xx HAO

EVO6 YY/ZZZ 6xx HAO

EVO YY/ZZZ 6xx RDB

EVO6 YY/ZZZ 6xx RDB

EVO YY/ZZZ 6xx NAT

EVO6 YY/ZZZ 6xx NAT

Type Non‑IC, 6 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, and Class 2 output and offered with an LED Lamp Array consisting of a max of 208 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 6xx for the downlight version and EVO‑W 6xx for the wall‑washer trim. This EVO is offered with a Single Fusing (SF) Option and an nLight (NL) control option (nIO EZDL CCT or NPS 80 EZ module).

Model(s)Input Rating
EVO6 TUWH YY/ZZZ, EVO4 WDIM YY/ZZZ (EVO TUNABLE WHITE)120V to 277V input, 60 Hz, Type NON‑IC

Model(s)Input Rating
EVO6 TUWH YY/ZZZ CP, EVO6 WDIM YY/ZZZ CP (EVO TUNABLE WHITE CP) –120V to 277V input, 60 Hz, Type NON‑IC, designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

“YY” in Cat.No. denotes Color Temperature or Range, “ZZ” denotes Lumen Value and “xx” denotes Trim Color. Suffixes could be added (numbers and/or letters) to denote Trim Type, Distribution, Finish, Voltage, Options, Etc.

 

Note:

  1. Please refer to Report 70047209 to address additional alternate components and/or requirements for LED Recessed luminaires.
  2. All Catalog Nos in the file may be followed by addition suffixes that represent non-safety related product modifications. 

Recessed, Type IC Damp Location, multiple compartments, patient room troffer with optional ambient light controls and 0‑10V dimming via sensor Switch NIO device LED Luminaire

Model(s)Input Rating
HPT6 Series, - offered in a 2 foot by 2 foot size, Cat. No. HPT622 or 2 foot by 4 foot size, Cat. No. HPT624120 or 277V, 60Hz

LED Cylinder Downlight with 4 inch aperture, Damp or Wet Location, Class 2 output. Offered with multiple LED Lamp Arrays consisting from 3 to 60 LEDs. May be offered with optional Single Fusing (SF).

Model(s)Volts (V)Frequency (Hz)
EVO CYL 4, EVO4CCHYP, EVO4PCHYP, EVO4SCHYP, EVO4WCHYP, EVO4WTRCHYP120‑277 or 34760

  1. All Models - Please refer to Report 70047209 to address additional alternate components and/or requirements for LED luminaires.
  2. All Models - EVO models may also be cataloged as ICO.

LED Cylinder Downlight with 4 inch aperture, Damp or Wet Location, Class 2 output. Offered with LED Lamp Arrays consisting of maximum of 25 LEDs.

Model(s)Volts (V)Frequency (Hz)
EVO CYL ARTC RGBW 4120‑277 or 34760

  1. All Models - Please refer to Report 70047209 to address additional alternate components and/or requirements for LED luminaires.
  2. All Models - EVO models may also be cataloged as ICO.

LED Cylinder Uplight and Downlight with 6 inch aperture, Damp Location, Offered with multiple LED Lamp Arrays consisting from 10 to 64 LEDs energized by class 2 driver.

Model(s)Volts (V)Frequency (Hz)
EVO CYL D/ID 6120‑277 or 34760

  1. All Models - Please refer to Report 70047209 to address additional alternate components and/or requirements for LED luminaires.
  2. All Models - EVO models may also be cataloged as ICO.

Recessed luminaire, 2 foot by 2 foot, Type IC, LED Light source, Class 2 Driver, Applications ‑ max. 60 LEDs, Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming

Model(s)Input Voltage (V)Input Frequency (Hz)Input Current (A max)Input Power (W max)
SPX, CPX 90CRI, CPX 22 90CRI, CPX 2X2 90CRI120 to 34750/600.5564.3

Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Recessed luminaire, 2 foot by 4 foot, Type IC, LED Light source, Class 2 Driver, Applications ‑ max. 84 LEDs, Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming

Model(s)Input Voltage (V)Input Frequency (Hz)Input Current (A max)Input Power (W max)
SPX2X4, SPX, CPX 90CRI, CPX 2X4 90CRI, CPX 24 90CRI120 to 34750/600.7486.4

Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

1 foot by 4 foot Type IC recessed luminaire, LED Light source, Class 2 Driver ‑ max. 60 LEDs. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming

Model(s)Input Voltage (V)Input Frequency (Hz)Input Current (A max)Input Power (W max)
SPX 14, SPX1X4, SPX, CPX 90CRI, CPX 14 90CRI, CPX 1X4 90CRI120 to 347 50/600.5665.3

Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.  

These are Type IC recessed LED luminaires that are offered in lengths from 2 feet to 6 feet or up to 12 feet at 1 inch increments and either 3 inch, 4 inch or 6 inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number depending on the length of the luminaire. Optionally, the SL4L and SL6L Luminaires are offered with LED Downlights assemblies in a varying number of assemblies per Luminaire limited to a minimum distance of 2 feet on center between downlights.

Model(s)
SL2L, SL4L and SL6L - Slot LED Series

Luminaires are offered with a Regressed Lens, Cat. Nos. SL2L RLP, SL4L RLP, or SL6L RLP or with a Flush Lens, Cat. Nos. SL2L FLP, SL4L FLP or SL6L FLP.   Optionally, the luminaires may be supplied with a combination of optical lenses that snap on to the PWBs.   Downlight assemblies are mounted to a trim plate to match the corresponding lens mounting position, but not available in conjunction with the use of optical snap lenses Offered in 120 to 277V or 347 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with four different luminaire output packages dependent on the LED Driver’s output current setting of either 250mA, 425mA, 600ma or 775mA.  Offered with different LED Chip Color Temp.   Also offered with optional Chicago Plenum (CP) certification and optional Emergency Battery Pack (E10W) which is remotely mounted from the luminaire.  May also be offered with an optional Wet Location (WL).

Variation of the SL2L Series Type IC recessed LED luminaires which is offered in lengths of 1 foot, 1 foot 6 inches, and 1 foot 9 inches, with a 2‑5/8 inch nominal width.

Model(s)
Alternate Construction: Cat. No. SL2L U1, U1/6, & U1/9 FLP

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction: Cat. No. SL2L U1, U1/6, & U1/9 FLP120‑27750/60

Variation of the SL2L Series Type IC recessed LED luminaires which is offered in lengths of 6 foot, 6 foot 11 inches, 7 foot and 8 foot. offered in LED PWBs with output of blue color temperatures and 400LMF powered by LUTRON LDE52U1MN‑KABLK driver. Rated Input 120/277 VAC, 50‑60Hz, 0.09A max, 10.2W max

Model(s)
Alternate Construction: Cat. No. SL2L U6, U6/11, U7 & U8 FLP

Type IC recessed LED luminaires that are offered in nominal lengths of 2‑feet 6‑inches, 4‑feet 6‑inches, and 5‑feet and 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaires are offered with a decorative sheet metal door with a captured Lens suspended below the intended suspended grid ceiling members by torsion springs engaged in openings in the grid ceiling members.

Model(s)
Alternate Construction - Cat. No. SL6LMOD Series

Offered in 120 to 277 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   Suitable for Damp Location

These are Type IC recessed LED luminaires that are offered in a 5ft nominal length and a 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion.

Model(s)
Alternate Construction - Cat. Nos. SL6L Custom Series (B14977-9/16 GRID-65 H35 EESB FA)

Offered in 120 to 277 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with the LED Driver’s output current setting of 770mA.  Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

These are Type IC recessed LED luminaires that are offered in a 2.5ft nominal length and a 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion.

Model(s)
Alternate Construction - Cat. Nos. SL6L Custom Series (B14977 2.5FT TG 80CRI 1500LM 277V ECO D105)

Offered in 120 to 277 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with the LED Driver’s output current setting of 750mA.  Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

This is a Type IC recessed LED luminaire that are offered in a length of 1 foot 2 inches and 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number depending on the length of the luminaire.

Model(s)
SL6L U1/2 - Slot LED Series

Luminaire is offered with a Flush Lens, Cat. Nos. SL6L FLP. Offered in 120 to 277V, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with one luminaire output package dependent on the LED Driver’s output current setting of 425mA.  Offered with different LED Chip Color Temp. Suitable for Damp Locations.

These are Type IC recessed LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 inch nominal lengths and a 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion.

Model(s)
Alternate Construction - Cat. No. SL5L Custom Series

Offered in 120 to 277 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with the LED Driver’s output current setting equal to the SL4L Series.  Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

These are Type IC recessed LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 inch nominal lengths and a 8‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion.

Model(s)
Alternate Construction - Cat. No. SL8L EWR Custom Series

Offered in 120 to 277 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with the LED Driver’s output current setting equal to the SL4L Series.  Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

Variation of the SL4L series type IC recessed luminaire with length range 1 foot to 6 feet or up to 12 feet with increments less than 1 inch. Lengths less than 2 feet in length wattage not to exceed 0.74 Watts/Inch. Where X can be any numerical number 0 through 12 and indicates length in feet, and Y.YY can be any numerical number 0.00 though 11.99 and indicates length in inches.

Model(s)
Alternate Construction – Cat. No. SL4L UX/Y.YY

Model(s)Input Frequency (Hz)
Alternate Construction – Cat. No. SL4L UX/Y.YY50/60

Variation of the SL6L series Type NON‑ IC recessed Luminaire offered in 6‑inch nominal width and 4‑foot nominal length. Includes TUWH as well as RGBW LED boards with compatible drivers.

Model(s)
Alternate Construction – Cat No, SL6L 4FT FLP TG TUWH/RGBW (Custom Series)

Rated 120 or 277V, 50/60Hz, 1.23 A, 145 W.    May be provided with optional emergency LED Driver

Identical to model SL2L, SL4L and SL6L – Slot LED Series with the exception of a RGBW Light Engine.

Model(s)
Cat. No. SL2L RGBW, SL4L RGBW, SL6L RGBW

Input rated 120-277V, 50-60Hz, Max 10.58W per foot

Type IC recessed LED luminaires that are offered in nominal lengths from 4‑ft to 8‑feet with a 4‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Identical to the SL4L models except the luminaires are offered with a decorative sheet metal door with a captured Lens suspended below the intended suspended grid ceiling members by torsion springs engaged in openings in the grid ceiling members.

Model(s)
Alternate Construction - Cat. No. SL4LHJAIA Series

Offered in 120 to 277 Volt input voltage, 50/60 Hz, Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   Suitable for Damp Location

Identical to Cat. Nos. SL2L, SL4L and SL6L ‑ Slot LED Series except installed from the floor side

Model(s)
Alternate Construction - Cat. No. FLINB (Install from Below)

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction - Cat. No. FLINB (Install from Below)120‑27750/60

Recessed IC, LED Luminaire that may be offered as a 2ft by 2ft; 1ft by 4ft, 2ft by 4ft and 600mm by 600mm. Luminaire is offered with either Normal Lumen LED PWB’s or with High Lumen LED PWB’s. Offered in 120 Volt to 277 Volt or 347 Volt input voltage, 50/60 Hz, Class 2 or LVLE output voltages. Damp Locations

Model(s)
Cat. No. WHSL

Recessed Type IC, Damp Location rated, LED Luminaire that may be offered as 2ft by 2ft; 1ft by 4ft, and 2ft by 4ft Luminaires, 120V to 277V (MVOLT) or 347V input, 50/60 Hz, Class 2 or LVLE output voltages and offered with an LED Lamp Array with a maximum of 300 LEDs. May be offered with Occupancy sensor (rES7) and the BGTD options.

Model(s)
Cat. No. WHSPR

Identical to model WHSPR except uses an RGBW Light Engine and LED Driver.

Model(s)
Cat No. WHSPR 2X4 RGBW and WHSPR 2X2 RGBW

Identical to model WHSPR except utilizes a Static White and Red LED engine combination.

Model(s)
Cat No. WHSPR 2X2 STWH/RED

Recessed Type IC, Damp Location rated, LED Luminaire that may be offered as 2ft by 2ft and, 2ft by 4ft Luminaires, 120V to 277V (MVOLT) input, 50/60Hz, Class 2 or LVLE output voltages and offered with an LED Lamp Array with a maximum of 240 LEDs.

Model(s)
Cat. No. CTRFWHSL

Recessed Type IC, Damp Location rated, LED Luminaire that may be offered as 2ft by 2ft; 1ft by 4ft, and 2ft by 4ft Luminaires, 120V to 277V (MVOLT) or 347V input, 50/60 Hz, Class 2 or LVLE output voltages. 1x4 offered with an LED Lamp Array with a maximum of 180 LEDs, 2x2 and 2x4 offered with an LED Lamp Array with maximum of 512 LEDS. May be offered with Occupancy sensor as an option.

Model(s)
Cat. No. WHSPR LCTR

Recessed Type IC, Damp Location rated, LED Luminaire that may be offered as 2ft by 2ft; 1ft X 4ft, 2ft x 4ft, and 600mm by 600mm; 120V to 277V (MVOLT) or 347V input, 50/60 Hz, Class 2 or LVLE output voltages and offered with an LED Lamp Array with a maximum of 450 LEDs. This model is intended for use as an air handling luminaire in a plenum application.

Model(s)
Cat. No. WHSPR AR

Recessed Type IC, Damp Location rated, LED Luminaire that may be offered as 2ft by 2ft; Input rated 120‑277V 50/60 Hz. Offered with up to 128 LEDs

Model(s)
Alternate Construction Cat No CALS WHSPR 2X2 RGBW & TUWH

4‑inch aperture, LED Recessed Luminaire, Damp or Wet Locations (as determined by finishing section rating), Rated 120V to 277V or 347V, 60 Hz. IC = 13.0W max (With both Trims), Non‑IC = 34.9W max (With P Trim), Non‑IC = 27.5W (with LW trim), Non‑IC Marked Spacings = 34.9W max (with LW trim). offered with an LED Array consisting of a max of 24 LEDs. May be offered with Single Fusing (SF) Option, Emergency Lighting Battery Pack (E6WR) option, and various nLight control options. Cat. Nos. of the Finishing Sections for above are IVO4S P, IVO4SQS P for the downlight version and IVO4S LW, IVO4SQS LW for the wall‑wash trim.

Model(s)
Cat. Nos. IVO4S D NCH, IVO4SQS D NCH, IVO4S WW NCH, IVO4SQS WW NCH

Same as NCH except designed to be installed from below the ceiling. Rated 120V to 277V or 347V, 60 Hz. Max 13.0W for Type IC (P or LW Trim). Max 34.9W for Type Non‑IC (P Trim). Max 27.5W for Type Non‑IC (LW Trim).

Model(s)
Cat. No. IVO4S D RM, IVO4SQS D RM, IVO4S WW RM, IVO4SQS WW RM

Same as NCH above except designed to meet the City of Chicago Environment Code (CCEC) requirements. Rated 120V to 277V or 347V, 60 Hz, 22.7W max. Type IC Only.

Model(s)
Cat. No. IVO4S D CP, IVO4SQS D CP, IVO4S WW CP, IVO4SQS WW CP

Same as NCH above except designed to meet the insulation contact, air‑tight requirements. Rated 120V to 277V or 347V, 60 Hz, 22.7W max. Type IC Only.

Model(s)
Cat. No. IVO4S D ICAT, IVO4SQS D ICAT, IVO4S WW ICAT, IVO4SQS WW ICAT

6‑inch aperture, LED Recessed Luminaire, Damp or Wet Locations(as determined by finishing section rating), Rated 120V to 277V or 347V, 60 Hz. Max 16W for Type IC. Max 55W for Type Non‑IC. offered with an LED Array consisting of a max of 48 LEDs. May be offered with Single Fusing (SF) Option, Emergency Lighting Battery Pack (E6WR) option, and various nLight control options. Cat. Nos. of the Finishing Sections for above are IVO6S P, IVO6SQS P for the downlight version and IVO6S LW, IVO6SQS LW for the wall‑wash trim.

Model(s)
Cat. Nos. IVO6S D NCH, IVO6SQS D NCH, IVO6S WW NCH, IVO6SQS WW NCH

Same as NCH except designed to be installed from below the ceiling, Rated 120V to 277V or 347V, 60 Hz, Type IC = 16.1W max, Type Non‑IC = 48.0W max, Type Non‑IC Marked Spacings = 55.2W max

Model(s)
Cat. No. IVO6S D RM, IVO6SQS D RM, IVO6S WW RM, IVO6SQS WW RM

Same as NCH above except designed to meet the City of Chicago Environment Code (CCEC) requirements., 25.6W max. Type IC Only.

Model(s)
Cat. No. IVO6S D CP, IVO6SQS D CP, IVO6S WW CP, IVO6SQS WW CP

Same as NCH above except designed to meet the insulation contact, air‑tight requirements. Rated 120V to 277V or 347V, 60 Hz, 25.6W max. Type IC Only.

Model(s)
Cat. No. IVO6S D ICAT, IVO6SQS D ICAT, IVO6S WW ICAT, IVO6SQS WW ICAT

Note:

  1. All Catalog Nos in the file may be followed by additional suffixes that represent non-safety related product modifications. 

Type Non‑IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V or 347V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a max of 60 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 4xx for the downlight version and EVO‑WW 4xx for the wall‑washer trim and Test Switch Trim, Cat No. EVO 4 xx EL for Emergency Battery Pack. The EVO 4 is offered with Single Fusing (SF) Option, Occupancy Sensor/Dimming (NEPP) option, Surge Protector (SP) option and Emergency Lighting Battery Pack (EL/ELR) option. Offered with various nLight control options.

Model(s)
EVO 4, EVO SURG, EVO PRT or EVO FSD 4

Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

Model(s)
EVO 4 CP, EVO SURG, EVO PRT or EVO FSD 4  CP

Same as above except connected to a Remote Driver Assembly, 120V to 277V input, 60 Hz and Class 2 output, with an LED Lamp Array consisting of a max of 16 LEDs and 300mA maximum drive current.

Model(s)
EVO 4 RD, EVO SURG, EVO PRT or EVO FSD 4 RD

Type Non‑IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a max of 25 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 4xx for the downlight version and EVO‑W 4xx for the wall‑washer trim. This EVO 4 is offered with a Single Fusing (SF) Option and an nLight (NLT) control option (NPS 80 EZ module).

Model(s)
EVO WDIM 4, EVO TUWH 4, EVO ARTC RGBW 4 (EVO DYNAMIC)

Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

Model(s)
EVO WDIM 4 CP, EVO TUWH 4 CP, EVO ARTC RGBW 4 CP (EVO DYNAMIC CP)

Same as above except type IC and designed for Natatorium requirements with an LED Lamp Array consisting of a max of 16 LEDs and 300mA maximum drive current.

Model(s)
EVO 4 NAT

Type Non‑IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a max of 208 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 4xx for the downlight version and EVO‑W 4xx for the wall‑washer trim. This EVO 4 is offered with a Single Fusing (SF) Option and an nLight (NL) control option (nIO EZDL CCT or NPS 80 EZ module).

Model(s)
EVO4 TUWH, EVO4 WDIM 4 (EVO TUNABLE WHITE)

Type Non‑IC‑ Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

Model(s)
EVO4 TUWH CP, EVO4 WDIM CP (EVO TUNABLE WHITE CP)

Note:

  1. Cat No. ALED has been changed to EVO in Edition No. 4.
  2. Please refer to Report 2703239 to address additional alternate components and/or requirements for LED Recessed luminaires.
  3. Catalog No EVO SURG is representative of the following Catalog Nos.  EVO4SG, EVO4P, EVO4FS, EVO4SH, and EVO4CR
  4. All Catalog Nos in the file may be followed by addition suffixes that represent non-safety related product modifications. 
  5. Catalog Nos are equivalent and represent each other as follows:

Currently Listed Catalog Number

Equivalent Catalog Number

EVO 4, EVO 4 CP, EVO 4 RD

EVO4, EVO4 CP, EVO4 RD

EVO SURG, EVO SURG CP, EVO SURG RD

EVO4SG, EVO4SG CP, EVO4SG RD

EVO PRT, EVO PRT CP, EVO PRT RD

EVO4P, EVO4P CP, EVO4P RD

EVO FSD 4, EVO FSD 4 CP, EVO FSD 4 RD

EVO4FS, EVO4FS  CP, EVO4FS  RD

EVO WDIM 4

 

EVO TUWH 4

 

EVO ARTC RGBW 4 CP

 

EVO 4 NAT

 

Recessed, Type IC/Non‑IC, LED, Damp Location Luminaire, offered in a 2 foot by 4 foot size, Cat. No. 2VRTL L48, 2 foot by 2 foot size, Cat. No. 2VRTL L24 and 1 foot by 4 foot size, Cat. No. VRTL L48, with input voltages of either 120 volts, 277 volts Mvolt (120‑277), or 347 volts, 50/60 Hz. Cat No. 2VRTL L48 24000LM and 2VRTL L24 7000LM may be additionally rated 480 Vac, 50/60 Hz input.

Model(s)
(2)VRTL Series

Recessed, Type IC/Non‑IC, LED, Wet Location Luminaire, offered in a 2 foot by 4 foot size, Cat. No. 2WRTL L48, 2 foot by 2 foot size, Cat. No. 2WRTL L24 and 1 foot by 4 foot size, Cat. No. WRTL L48, with input voltages of either 120 volts, 277 volts Mvolt (120‑277), or 347 volts, 50/60 Hz. Cat No. 2WRTL L48 24000LM and 2WRTL L24 7000LM may be additionally rated 480 Vac, 50/60 Hz input

Model(s)
(2)WRTL Series

Recessed, Type IC/Non‑IC, LED, Wet Location Luminaire, offered in a 2 foot by 4 foot size, Cat. No. 2SRTL L48, 2 foot by 2 foot size, Cat. No. 2SRTL L24 and 1 foot by 4 foot size, Cat. No. SRTL L48, with input voltages of either 120 volts, 277 volts Mvolt (120‑277), or 347 volts, 50/60 Hz.

Model(s)
(2) SRTL Series

Recessed, Type IC/Non‑IC, LED, Wet Location Luminaire, offered in a 2 foot by 4 foot size, Cat. No. HSTL 2X4, 2 foot by 2 foot size, Cat. No. HSTL 2X2 and 1 foot by 4 foot size, Cat. No. HSTL 1X4, with input voltages of either 120 volts, 277 volts Mvolt (120‑277), or 347 volts, 50/60 Hz.

Model(s)
HSTL Series

Recessed luminaire, 2 foot by 2 foot, Type IC, LED Light source, max. 540 LEDs, Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming

Model(s)
Cat. No. HVTS 2X2  – Same as STACK 2X2 above except brand for Holophane, Inc.

Recessed luminaire, 1 foot by 4 foot, Type IC, LED Light source, max. 540 LEDs, Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming

Model(s)
Cat. No. HVTS 1X4  – Same as STACK 1X4 above except brand for Holophane, Inc.

Recessed luminaire, 2 foot by 4 foot, Type IC, LED Light source, max. 540 LEDs, Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming

Model(s)
Cat. No. HVTS 2X4  – Same as STACK 2X4 above except brand for Holophane, Inc.

***Note*** Catalog Nos: are representative of each other as detailed below throughout the report:

 

Catalog Number

Represents Catalog Numbers:

STAK 22

STAK 2x2

STACK 22

STAK 2x2

STACKP 22

STAKP 2x2

STAK 14

STAK 1x4

STACK 14

STAK 1X4

STACKP 14

STAKP 1X4

STAK 24

STAK 2X4

STACK 24

STAK 2X4

STACKP 24

STAKP 2X4

Recessed LED Luminaires, Type IC, 20inch by 48inch

Model(s)
Cat. No. 20BLT4 Series

Same as the BLT4 Series above except with different dimensions.

Recessed LED Air‑Handling Luminaire, Type IC, 2 foot by 2 foot

Model(s)
Cat. No. 2BLT2 A Series

Same as the BLT2 shown above except with air return/supply slots in the sides of the housing.

Recessed LED Luminaire, Type IC, 600mm by 600mm

Model(s)
Cat. No. 2BLT2 MG Series

Same as the BLT2 Series above except with different dimensions.

Recessed LED Luminaire, Type IC, 2 foot by 2 foot

Model(s)
Cat. No. 2BLT2 Series

(alternate nomenclature Cat. No. BLC 2X2 Series or Cat. No. BLT 2X2 Series)

Same as the BLT2 shown above.

Recessed LED Air‑Handling Luminaires, Type IC, 2 foot by 4 foot

Model(s)
Cat. No. 2BLT4 A Series

Same as the BLT4 shown above except with air return/supply slots in the sides of the housing.

Recessed LED Luminaires, Type IC, 600mm by 1200mm

Model(s)
Cat. No. 2BLT4 MG Series

Same as the BLT4 Series above except with different dimensions.

Recessed LED Luminaires, Type IC, 500mm by 1200mm

Model(s)
Cat. No. 2BLT4 MG5 Series

Same as the BLT4 Series above except with different dimensions.

Recessed LED Luminaires, Type IC, 2 foot by 4 foot

Model(s)
Cat. No. 2BLT4 Series

Same as the BLT4 shown above.

Model(s)
Cat. No. BFT24 Series

Same as the 2BLT4 Series except with alternate catalog nomenclature.

Recessed LED Luminaires, Type IC, 1 foot by 4 foot

Model(s)
Cat. No. BFT14 Series

Same as the BLT4 Series above except with alternate catalog nomenclature.

2 foot by 2 foot, Type IC, Recessed LED Luminaire.

Model(s)
Cat. No. BFT22 Series

2 foot by 2 foot, Type IC, Recessed LED Luminaire. Same as the 2BLT2 Series above except with alternate catalog nomenclature.

1 foot by 2 foot, Recessed LED Luminaire, Type IC

Model(s)
Cat. No. BLT2 Series

The luminaire is offered with five different normal lumen packages and five different High Efficient (HE) lumen packages with a maximum of 180 LED Chips per luminaire. It has 120V to 277V (MVOLT) and 347V input voltages at 50/60 Hz. Offered with one Class 2 or LVLE or LPS LED Drivers. Luminaires are Damp Location rated and suitable for a 25°C ambient. They are offered with four different optional diffuser lenses and Bi-Level dimming (SLD) and optional Emergency LED battery Pack (EL7L or EL14L). It is also offered with an optional Bodine Generator Transfer Device (BGTD or BGTDU). Also offered with optional n-light Controls (N80 or N100 or nIO EZDx) and optional Occupancy Sensors (rES7, rIO, NES7, Vertex Series and MSD Series), with Chicago Plenum (CP) option, and with optional Low Voltage Field Adjustable Module. Also offered with optional Energy Management Equipment (Smart Hub).

Recessed LED Air‑Handling Luminaire, Type IC, 1 foot by 4 foot

Model(s)
Cat. No. BLT4 A Series

Same as the BLT4 Series above except with air return/supply slots in the sides of the housing.

Model(s)
Cat. No. BLT4 FACEPLATE Series

Same as Cat. No. BLT4 Series above except mounts into optional faceplate filler accessory. Faceplate dimensions, 20in by 60in. May be factory or field installed to standard BLT4 luminaire

Model(s)
Cat. No. LN2DN Series, Cat. No. LN2SN Series, Cat. No. LN4DN Series, Cat. No. LN4SN Series

  • Alternate nomenclature for Lithonia Lighting
  • Rebranding nomenclature of existing product. All descriptions, features, and options are the same as existing nomenclature as referenced below:
  • LN2DN equivalent to S2PD
  • LN2SN equivalent to S2SD
  • LN4DN equivalent to S4PD
  • LN4SN equivalent to S4SD
  • *Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

Recessed LED Luminaires, Type IC, 300mm by 1200mm

Model(s)
Cat. No. BLT4 MG Series

Same as the BLT4 Series above except with different dimensions.

1 foot by 4 foot, Type IC, Recessed LED Luminaire.

Model(s)
Cat. No. BLT4 Series – (alternate nomenclature Cat. No. BLC 1X4 Series)

1 foot by 4 foot, Type IC, Recessed LED Luminaire.   The luminaire is offered with five different normal lumen packages and five different High Efficient (HE) lumen packages with a maximum of 360 LED Chips per luminaire.   It has 120V to 277V (MVOLT) and 347V input voltages at 50/60 Hz. Offered with one or two Class 2 or LVLE or LPS LED Drivers.   Luminaires are Damp Location rated and suitable for a 25°C ambient.   They are offered with four different optional diffuser lenses and Bi-Level dimming (SLD) and optional Emergency LED battery Pack (EL7L or EL14L).   It is also offered with an optional Bodine Generator Transfer Device (BGTD or BGTDU).   Also offered with optional n-light Controls (N80 or N100 or nIO EZDx) and optional Occupancy Sensors (rES7, rIO, NES7, Vertex Series and MSD Series) and with Chicago Plenum (CP) option.  BLT4 rated for 4000 lumen (40L) output or less may be offered with an optional Blue Tooth Low Energy Module (BLE) for wireless communication to the LED Driver. Also offered with optional Energy Management Equipment (Smart Hub).

LED luminaires, Surface mounted (ceiling and wall), that are offered in lengths from 2 feet to 8 feet at 1 foot increments and may be either all LED Strip PWB or may be supplied up to three LED Downlights; one on each end or in the middle

Model(s)
 Cat. No. S2LSP Series,  Cat. No. S2LW Series, Cat. No. S2LS Series

The luminaire is offered with PWBs that vary in length and number depending on the length of the luminaire. In the case of downlights being used, the length of the LED strip PWB will be adjusted as required between 3" and 11" in length. Optionally, the fixtures may be supplied with a combination of optical lenses that either snap or slide over the PWBs. Suitable for 25 deg;C ambient with input voltages of 120 to 277V, 50/60 Hz and Class 2 output voltages. The S2LS 4 foot long luminaire may also be offered with a 347 volt, 50/60 Hz input. The S2LS 4 foot long luminaire may also be offered with a 347 volt, 50/60 Hz input. Luminaires may be used in continuous row mounting. Luminaires may be offered with optional Remote Mounted Emergency Battery Pack (EMPK) provided in a separate enclosure that is spaced a minimum of 6" away from the luminaire and mounted in an accessible location, or it may be internal to the luminaire. These luminaires can be mounted in a recessed/cove application. May be used in wet location environments for individual fixtures only.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

Model(s)
 Cat. No. S4LS  Series,  Cat. No. S4LSP  Series

This is the same as above except it is 4 inches wide instead of 2 inches wide. It is offered with the same options and accessories. May be used in wet location environments for individual fixtures only.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

Surface ceiling mounted LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 foot increments, or in "L", "X" and "T" configurations

Model(s)
Cat. No. S2SD Series, Cat. No. S2SDP Series

All "L", "X" and "T" configurations are welded at the intersection points of the extruded housings. The luminaire is offered with PWBs that vary in length and number depending on the length of the luminaire. Optionally, the fixtures may be supplied with a combination of optical lenses that either snap or slide over the PWBs. Suitable for 25°C ambient with input voltages of 120 to 277V, or 347V 50/60 Hz and Class 2 output voltages.  Luminaires may be used in continuous row mounting. Luminaires may be offered with optional Remote Mounted Emergency Battery Pack (EMPK) provided in a separate enclosure that is spaced a minimum of 6” away from the luminaire and mounted in an accessible location, or it may be internal to the luminaire. These luminaires can be mounted in a recessed/cove application.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

 

Model(s)
Cat. No. S4SD Series, Cat. No. S4SDP Series

This is the same as above except it is 4 inches wide instead of 2 inches wide. It is offered with the same options and accessories.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

These are pendant mounted LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 foot increments or in a 12 foot (alternate construction) and may be either all LED Strip PWB or may be supplied with up to three LED Downlights, one on each end and/or in the middle

Model(s)
 Cat. No. S2LID  Series,  Cat. No. S2LIDP  Series

Each unit is provided with adjustable aircraft cable grippers that are connected to a bracket in the luminaire on each end. The luminaire is offered with PWBs that vary in length and number depending on the length of the luminaire. In the case of downlights being used, the length of the LED strip PWB will be adjusted as required between 3” and 11” in length. Final Optionally, the fixtures may be supplied with a combination of optical lenses that either snap or slide over the PWBs. Luminaires are offered as Cat. No. S2LID (Indirect/direct) or Cat. No. S2LD (Direct only) or Cat No. S2LI (Indirect only). Suitable for 25C ambient with input voltages of 120 - 277V, or 347V 50/60 Hz and Class 2 output voltages. Luminaires may be used in continuous row mounting and may be offered with dust cover. Luminaires may be offered with optional Remote Mounted Emergency Battery Pack (EMPK) provided in a separate enclosure that is mounted above the ceiling and adjacent to a recessed junction box (box provided by alternate source), or it may be internal to the luminaire.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

Model(s)
 Cat. No. S4LID   Series,  Cat. No. S4LIDP   Series

This is the same as above except it is 4 inches wide instead of 2 inches wide. It is offered with the same options and accessories. Cat. No. S4LID is Indirect/Direct, Cat. No. S4LD is DIRECT only and Cat No. S4LI is INDIRECT only.*Additional characters, prefixes, numbers, letters, or words may be included in model identification to indicate customer designations, order information, or options and do not effect the overall construction or design as described in this report.

1 foot by 4 foot, Type IC LED recessed luminaire, LED Light source. Applications ‑ 144 LEDs (4 LED lamp boards). Damp locations, suitable for 25°C ambient. With optional Chicago Plenum construction.

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. AVLD4 (1 x 4), Cat. No. AVL4 (1 x 4)120‑27750/60

Cat. No. AVL4 (1 x 4), 1 foot by 4 foot, Same as Cat. No. AVLD4 (1 x 4) above except for a difference in the transmittance of the Lens Insert Diffuser material.

2 foot by 2 foot, Type IC LED recessed luminaire, LED Light source. Applications ‑ 168 LEDs (2 or 3 LED lamp boards). Damp locations, suitable for 25°C ambient. With EL emergency option and optional Chicago Plenum construction.

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. 2AVLD2 (2 x 2), Cat. No. 2AVL2 (2 x 2),120‑27750/60

Cat. No. 2AVL2 (2 x 2), 2 foot by 2 foot, Same as Cat. No. 2AVLD2 (2 x 2) above except for a difference in the transmittance of the Lens Insert Diffuser material.

2 foot by 4 foot, Type IC LED recessed luminaire, LED Light source. Applications ‑ 336 LEDs (6 LED lamp boards). Damp locations, suitable for 25°C ambient. With EL emergency option and optional Chicago Plenum construction.

Model(s)Input Frequency (Hz)
Cat. No. 2AVLD4 (2 x 4), Cat. No. 2AVL4 (2 x 4)50/60

Cat. No. 2AVL4 (2 x 4), 2 foot by 4 foot, Same as Cat. No. 2AVLD4 (2 x 4) above except for a difference in the transmittance of the Lens Insert Diffuser material.

These are Type IC recessed LED luminaires that are offered in lengths from 2 feet to 6 feet or up to 12 feet at 1 inch increments and either 3 inch, 4 inch or 6 inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number depending on the length of the luminaire.

Model(s)Input Voltage (V)Input Frequency (Hz)
SL2L, SL4L and SL6L - Slot LED Series120‑277 or 34750/60

Optionally, the SL4L and SL6L Luminaires are offered with LED Downlights assemblies in a varying number of assemblies per Luminaire limited to a minimum distance of 2 feet on center between downlights.   Luminaires are offered with a Regressed Lens, Cat. Nos. SL2L RLP, SL4L RLP, or SL6L RLP or with a Flush Lens, Cat. Nos. SL2L FLP, SL4L FLP or SL6L FLP.   Optionally, the luminaires may be supplied with a combination of optical lenses that snap on to the PWBs.   Downlight assemblies are mounted to a trim plate to match the corresponding lens mounting position, but not available in conjunction with the use of optical snap lenses Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages.   They are offered with four different luminaire output packages dependent on the LED Driver’s output current setting of either 250mA, 425mA, 600ma or 775mA.  Offered with different LED Chip Color Temp.   Also offered with optional Chicago Plenum (CP) certification and optional Emergency Battery Pack (E10W) which is remotely mounted from the luminaire.  May also be offered with an optional Wet Location (WL).

Variation of the SL2L Series Type IC recessed LED luminaires which is offered in lengths of 6 foot, 6 foot 11 inches, 7 foot and 8 foot, offered in LED PWBs with output of blue color temperatures and 400LMF powered by LUTRON LDE52U1MN‑KABLK driver. Max 10.2W

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction: Cat. No. SL2L U6, U6/11, U7 & U8 FLP120‑27750/60

Type IC recessed LED luminaires that are offered in nominal lengths of 2‑feet 6‑inches, 4‑feet 6‑inches, and 5‑feet and 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaires are offered with a decorative sheet metal door with a captured Lens suspended below the intended suspended grid ceiling members by torsion springs engaged in openings in the grid ceiling members. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. Suitable for Damp Location

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction - Cat. No. SL6LMOD Series120‑27750/60

These are Type IC recessed LED luminaires that are offered in a 5ft nominal length and a 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. They are offered with the LED Driver’s output current setting of 770mA. Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

Model(s)Input Frequency (Hz)
Alternate Construction - Cat. Nos. SL6L Custom Series (B14977-9/16 GRID-65 H35 EESB FA)50/60

These are Type IC recessed LED luminaires that are offered in a 2.5ft nominal length and a 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. They are offered with the LED Driver’s output current setting of 750mA. Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

Model(s)Input Frequency (Hz)
Alternate Construction - Cat. Nos. SL6L Custom Series (B14977 2.5FT TG 80CRI 1500LM 277V ECO D105)50/60

This is a Type IC recessed LED luminaire that are offered in a length of 1 foot 2 inches and 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number depending on the length of the luminaire. Luminaire is offered with a Flush Lens, Cat. Nos. SL6L FLP. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. They are offered with one luminaire output package dependent on the LED Driver’s output current setting of 425mA. Offered with different LED Chip Color Temp. Suitable for Damp Locations.

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. SL6L U1/2 - Slot LED Series120‑27750/60

These are Type IC recessed LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 inch nominal lengths and a 6‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. They are offered with the LED Driver’s output current setting equal to the SL4L Series. Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

Model(s)Input Frequency (Hz)
Alternate Construction - Cat. No. SL5L Custom Series50/60

These are Type IC recessed LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 inch nominal lengths and a 8‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Luminaire is offered with all LED Strip PWBs that vary in length and number to best fill the fixture’s lighted portion. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. They are offered with the LED Driver’s output current setting equal to the SL4L Series. Offered in three different LED Chip Color Temperatures. Suitable for Damp Location.

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction - Cat. No. SL8L EWR Custom Series120‑27750/60

Variation of the SL4L series. Type Non‑IC recessed luminaire. max 0.109A/ft, max 13.11W/ft.

Model(s)Input Frequency (Hz)
Alternate Construction – Cat. No. A170-3905450/60

Variation of the SL6L series Type NON‑ IC recessed Luminaire offered in 6‑inch nominal width and 4‑foot nominal length. Includes TUWH as well as RGBW LED boards with compatible drivers. Rated 1.23 A, 145 W. May be provided with optional emergency LED Driver

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction – Cat No, SL6L 4FT FLP TG TUWH/RGBW (Custom Series)120‑27750/60

Identical to model SL2L, SL4L and SL6L – Slot LED Series with the exception of a RGBW Light Engine. Input rated Max 10.58W per foot

Model(s)Input Voltage (V)
Cat. No. SL2L RGBW, SL4L RGBW, SL6L RGBW120‑277

Type IC recessed LED luminaires that are offered in nominal lengths from 4‑ft to 8‑feet with a 4‑inch nominal width as defined by the intended suspended grid ceiling member it is intended to be install in. Identical to the SL4L models except the luminaires are offered with a decorative sheet metal door with a captured Lens suspended below the intended suspended grid ceiling members by torsion springs engaged in openings in the grid ceiling members. Dimmable LED Driver, UL Class 2 or CSA LVLE output voltages. Suitable for Damp Location

Model(s)Input Voltage (V)Input Frequency (Hz)
Alternate Construction - Cat. No. SL4LHJAIA Series120‑27750/60

LED Recessed‑mounted Frame Light, Type IC, Dry and Damp Locations, See Following Table for Model Details.

Model(s)Input Voltage (V)Input Frequency (Hz)Input Current (A)Input Power (W)
LFRM 1X4 ALO3 SWW7 MVOLT M6, LFRM 2X2 ALO3 SWW7 MVOLT M6120‑27750/600.14/0.3340
LFRM 2X4 ALO8 SWW7 MVOLT M6120‑27750/600.18/0.4250

To the requirements of
CSA C22.2 NO. 250.0:21 (Reprint with revisions through and including June 18, 2021), UL 1598 (Fifth Edition; Reprint with revisions through and including June 18, 2021)

Ceiling‑Mounted Recessed 2 inch LED Downlight, Wet Locations, provided with switchable CCT and wattage feature, 0‑10V dimming type, with Non‑Renewable LEDs, Type IC, With Through‑Wiring Junction Box.

Model(s)Input VoltageFrequencyInput CurrentInput Wattage
WF2 RD ALO25 SWW5 90CRI MVOLT YY #&,  WF2 RD ALO25 SWW5 90CRI MVOLT CP* YY #&, WF2 DREG XX ALO25 SWW5 90CRI MVOLT YY #&, WF2 DREG XX ALO25 SWW5 90CRI MVOLT CP* YY #&120‑277V60Hz0.11A10W

Note: 

  1. “XX” in model designation could be “B” or “SM”, which indicates the aperture is Baffle or Smooth.
  2. “YY” in model designation could be “MW”, “MB”, “ORB”, “BN” or “SN”,“MWMB”, “MWORB”, “MWBN”, “MWSN”, “MBMW”, “MBORB”, “MBBN”, “MBSN”, “ORBMW”, “ORBMB”, “ORBBN”, “ORBSN”, “BNMW”, “BNMB”, “BNORB”, “BNSN”, “SNMW”, “SNMB”, “SNORB” or “SNBN”, which indicates the color of flange, where “MW” means matte white, “MB” means black, “ORB” means oil rubbed bronze, “BN” means brush nickel and “SN” means satin nickel.
  3. “#&” in model designation means package type; * in model designation could be any number 1-9 to denote package quantity.

To the requirements of
UL 1598 (Fifth Edition; Reprint with revisions through and including June 18, 2021)

Type IC Recessed LED Luminaires, dry or damp Locations, With Non‑Renewable LEDs

Model(s)Nominal Input Voltage (VAC)Frequency (Hz)Current (A)Power (W)Size
STAKPAK 2X4 ALO6 aaa bb120‑277 50/60 0.18‑0.41 49 overall (2*4)
STAKS 2X4 ALO6 SWW7 IE10WCP120‑277500.53(overall) 2*4

Model(s)Input Voltage (VAC)Frequency (Hz)Current (A)Power (W)Size
STAKS 1X4 ALO6 SWW7 CP120‑27750/600.18‑0.4149(overall) 1*4
STAKS 2X2 ALO3 SWW7 CP120‑277 50/600.15‑0.34 41 2*2
STAKS 2X2 ALO3 SWW7 IE10WCP120‑27750/600.15‑0.3444(Overall 2*2)
STAKS 2X4 ALO6 SWW7 CP120‑27750/600.18‑0.41492*4

Model(s)Input Voltage (VAC)Input Frequency (Hz)Current (A)Power (W)Size
STAKS 1X4 ALO6 SWW7 IE10WCP120‑27750/600.18‑0.4153(overall) 1*4)

2 foot by 2 foot Type IC recessed luminaire, LED Light source, Class 2 Driver. Applications – max. 252 LEDs. Rated output of 18‑32 volts DC, 34 VA max. Class 2 Driver. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming. Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Model(s)Input Voltage (V)Input Frequency (Hz)
ENVEX or ENVEX 22 or ENVEX 2X2, or ENVX or ENVEX 22 or ENVEX 2X2120 to 347 VAC50/60

1 foot by 4 foot Type IC recessed luminaire, LED Light source, Class 2 Driver. Applications – max. 280 LEDs Rated output of 22‑32 volts DC, 34 VA max. Class 2 Driver. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming. Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Model(s)Input Voltage (V)Input Frequency (Hz)
ENVEX or ENVEX 14 or ENVEX 1X4 or ENVX or ENVEX 14 or ENVEX 1X4120 to 347 VAC50/60

2 foot by 4 foot Type IC recessed luminaire, LED Light source, Class 2 Driver. Applications – max. 280 LEDs. Rated output of 22‑32 volts DC, 34 VA max. Class 2 Driver. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming. Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Model(s)Input Voltage (V)Input Frequency (Hz)
ENVEX or ENVEX 24 or ENVEX 2X4 or ENVX or ENVEX 24 or ENVEX 2X4120 to 347 VAC50/60

1 foot by 4 foot Type IC recessed luminaire, LED Light source, Class 2 Driver. Applications – max. 360 LEDs. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming. Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Model(s)Input Voltage (V)Input Frequency (Hz)
ENVEX 14 Tunable White120 to 347 VAC50/60

2 foot by 2 foot Type IC recessed luminaire, LED Light source,Class 2 Driver. Applications – max. 160 LEDs. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming. Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Model(s)Input Voltage (V)Input Frequency (Hz)
ENVEX 22 Tunable White120 to 347 VAC50/60

2 foot by 4 foot Type IC recessed luminaire, LED Light source, Class 2 Driver. Applications – max. 480 LEDs. Damp Locations, suitable for 25°C ambient. With 0‑10v option for Dimming. Catalog Nos may also be followed by (CP) which represents Chicago Plenum option approved for use in the City of Chicago.

Model(s)Input Voltage (V)Input Frequency (Hz)
ENVEX 24 Tunable White120 to 347 VAC50/60

To the requirements of
UL 1598 (Fifth Edition; Reprint with Revisions Through and Including JANUARY 31, 2024)

Round Downlight, Type NON‑IC, Suitable for Wet Locations. May be offered with an optional Emergency Battery Pack, option EL / ELR. May also be offered with a Chicago Plenum option (CP) for use in the City of Chicago. Two‑foot marked spacing, NON‑IC is required for 277V, 0.580A, 30W fixture. May be offered with nEPPX linear power / relay pack with dimming option. May be offered with SF (single fuse) option and GTD (Generator Transfer Device) option. The GTD Option is NOT offered on units with a 347 Volt input or with the EL/ELR option.

Model(s)Input Voltage (V)Max. Wattage (W)
Cat No. LDN 6120‑277 or 34730

Type IC, Suitable for Wet Locations. This construction is for use with a UL Listed Remote Driver Box Cat No. PFM XXCHAN 50W MVOLT XXX XX.

Model(s)Input Voltage (V)Max. Wattage (W)
Cat No LDN 6 PFMIC120‑27716

Note: Please refer to Report 70047029 to address additional alternate components and/or requirements for LED luminaires.

Surface‑mounted (Pendant Aircraft Cable, Stem, Surface, or Wall). Cat. No. VMM9 is a pendant cable mounted luminaire and Cat. No. VMW9 is a wall mounted luminaire. Class 2 (UL) or LVLE (CSA) Luminaire with a remote recessed Type IC rated LED Driver for use in Dry or Damp Locations. Offered in 4 foot and 8 foot lengths and suitable for 35°C ambient.

Model(s)Input Voltage (V)Input Frequency
VMM9 and VMW9 HI or LO120‑277 or 347‑48050/60

120V to 277V also offered with emergency battery pack. Each 4 foot length is provided with eight LED PWBs and one 50VA Maximum Remote LED Driver that can be located in a Type IC Ceiling.   May be supplies for Continuous Row Mounting and offered with single fusing (SF) option.   Cat. No. VMM9 HI uses one 50VA LED Driver and eight 48 LED PWBs per 4 foot luminaire or two 50VA LED Drivers and sixteen 48 LED PWBs per 8 foot luminaire.   The output of the 50VA Driver is programed at 975mA per driver.   Additionally may utilize two (2) 50VA LED Drivers and eight 48 LED PWBs per 4 foot luminaire or four (4) 50VA LED Drivers and sixteen 48 LED PWBs per 8 foot luminaire Cat. No. VMM9 LO uses the same number of LED Drivers and PWBs as the VMM9 HI Luminaire except the LED Drivers are programed for a maximum of only 40VA output with an output current of 750mA per driver.   The Luminaire Enclosure is offered with either Square End Cap, which are standard or optional Rounded End Cap, which is the RDEP option.   Only the End Caps are changed, all other construction remains the same.

MN9 G or ST is a Type IC Recessed LED luminaires. These are1 foot by 1 foot, 2 foot by 2 foot, 1 foot by 4 foot, and 4 foot by 4 foot LED luminaires. MN9 G 1X1 or MN9 ST 1X1 is denoted for 1 foot by 1 foot luminaire, MN9 G 2X2 or MN9 ST 2X2 is denoted for 2 foot by 2 foot luminaire, MN9 G 1X4 is denoted or MN9 ST 1X4 is denoted for 1 foot by 4 foot luminaire, and MN9 G 4X4 or MN9 ST 4X4 is denoted for 4 foot by 4 foot luminaire. 1X1, 2X2, and 1X4 luminaires utilize a class 2 LED Driver rated for a maximum of 41 VA. 4X4 utilizes (2) class 2 LED Drivers both rated for 120‑277Vac, one (1) driver is rated for maximum of 100 VA and the other rated for 30 VA. Luminaires are Damp Location and suitable for use in a 25°C ambient. For mounting in ceiling grid systems or in drywall ceilings. All versions excluding the 4X4 are offered with an optional 347V to 480V input Step‑down Transformer rated for 250W max.

Model(s)Input Voltage (V)Input Frequency (Hz)
MN9 G or ST (1X1, 2X2, 1X4)120‑277, 347 or 480 50/60
MN9 G or ST (4X4)120‑27750/60

These are the same type luminaires as the MN9 Series except these are 1 foot by 1 foot or 2 foot by 2 foot or 1 foot by 4 foot Type IC Recessed Wall Mount LED Luminaires with Class 2 LED Driver rated for a maximum of 41 VA. It is offered with an optional 347V to 480V input Step‑down Transformer rated for 250W max. Luminaires are Damp Location and suitable for use in a 25°C ambient.

Model(s)Input Voltage (V)Input Frequency (Hz)
MN9 RW120‑277, 347 or 480 50/60

To the requirements of
CSA C22.2 NO. 250.0:21 (Reprint with revisions through and including June 18, 2021), UL 1598 (Fifth Edition; Reprint with revisions through and including June 18, 2021)

LED Recessed‑mounted Flat Panel Luminaires, Type IC, Dry and Damp Locations

Model(s)Input Voltage (V)Input Frequency (Hz)Input Power (W)
CPX2X2 32L xxK 34734750/6034

Notes: xx can be 27 to 65, indicating the CCT (2700K-6500K).

LED Recessed‑mounted Flat Panel Luminaires, Type IC, Dry and Damp Locations (or Wet for CPXIP)

Model(s)Input Voltage (V)Input Frequency (Hz)Input Power (W)
CPX OR CPXIP 2X2 3200LM xxK M4120‑27750/6032
CPX OR CPXIP 2X2 3200LM xxK A12 M4120‑27750/6032
CPX OR CPXIP 2X2 4000LMHE xxK M4120‑27750/6032
CPX OR CPXIP 1X4 3400LM xxK M4120‑27750/6032
CPX OR CPXIP 1X4 4000LMHE xxK M4120‑27750/6032
CPX OR CPXIP 2X2 5000LM xxK M4120‑27750/6046
CPX OR CPXIP 1X4 5000LM xxK M4120‑27750/6046
CPX OR CPXIP 2X4 4000LM xxK M2120‑27750/6040
CPX OR CPXIP 2X4 4000LM xxK A12 M2120‑27750/6040
CPX OR CPXIP 2X4 5000LMHE xxK M2120‑27750/6040
CPX OR CPXIP 2X4 6000LM xxK M2120‑27750/6056
CPX OR CPXIP 2X2 ALO7 SWW7 M4120‑27750/6038
CPX OR CPXIP 2X2 ALO7 SWW7 PWS1836 M4120‑27750/6038
CPX OR CPXIP 1X4 ALO7 SWW7 M4120‑27750/6038
CPX OR CPXIP 1X4 ALO7 SWW7 PWS1836 M4120‑27750/6038
CPX OR CPXIP 2X4 ALO8 SWW7 M2120‑27750/6052
CPX OR CPXIP 2X4 ALO8 SWW7 PWS1836 M2120‑27750/6052
CPX OR CPXIP 2X2 ALO7 SWW7 A12 M4120‑27750/6038
CPX OR CPXIP 2X4 ALO8 SWW7 A12 M2120‑27750/6052
CPX OR CPXIP 2X2 3400LM xxK UVOLT M4120‑34750/6032
CPX OR CPXIP 2X4 4300LM xxK UVOLT M2120‑34750/6040
CPX OR CPXIP 2X2 ALO7 SWW7 UVOLT M4120‑34750/6036
CPX OR CPXIP 1X4 ALO7 SWW7 UVOLT M4120‑34750/6036
CPX OR CPXIP 2X4 ALO8 SWW7 UVOLT M2120‑34750/6050
CPX OR CPXIP 2X2 ALO7HE SWW7 UVOLT M4120‑34750/6032
CPX OR CPXIP 1X4 ALO7HE SWW7 UVOLT M4120‑34750/6032
CPX OR CPXIP 2X4 ALO8HE SWW7 UVOLT M2120‑34750/6050
CPX OR CPXIP 2X4 40L xxK 120 NODIM CP212050/6032
CPX OR CPXIP 1X4 3200LM xxK120‑27750/6033
CPX OR CPXIP 1X4 4000LMHE xxK120‑27750/6033
120‑27750/6034
34750/6038
CPX OR CPXIP 2X2 3200LM xxK,120‑27750/6033
CPX OR CPXIP 2X2 32L xxK120‑27750/6033
CPX OR CPXIP 2X2 4000LMHE xxK120‑27750/6033
120‑27750/6035
34750/6038
CPX OR CPXIP 2X4 4000LM xxK, CPX OR CPXIP 2X4 40LM xxK120‑27750/6033
CPX OR CPXIP 2X4 5000LMHE xxK120‑27750/6043
120‑27750/6040
34750/6044
CPX OR CPXIP 1X4 3200LM xxK 34734750/6034
CPX OR CPXIP 1X4 4000LMHE xxK 34734750/6034
CPX OR CPXIP 2X2 3200LM xxK 34734750/6034
CPX OR CPXIP 2X2 4000LMHE xxK 34734750/6034
CPX OR CPXIP 2X4 4000LM xxK 347, CPX OR CPXIP 2X4 40L xxK 34734750/6034
CPX OR CPXIP 2X4 5000LMHE xxK 34734750/6044
CPX OR CPXIP 1X4 3200LMHE xxK120‑27750/6029
CPX OR CPXIP 1X4 5000LM xxK120‑27750/6042
120‑27750/6043
34750/6047
CPX OR CPXIP 2X2 3200LMHE xxK120‑27750/6028
CPX OR CPXIP 2X2 5000LM xxK120‑27750/6042
CPX OR CPXIP 2X4 4000LMHE xxK120‑27750/6038
CPX OR CPXIP 2X4 6000LM xxK120‑27750/6046
CPX OR CPXIP 1X4 3200LMHE xxK 34734750/6030
CPX OR CPXIP 1X4 5000LM xxK 34734750/6043
CPX OR CPXIP 2X2 3200LMHE xxK 34734750/6029
CPX OR CPXIP 2X2 5000LM xxK 34734750/6043
CPX OR CPXIP 2X4 4000LMHE xxK 34734750/6038
CPX OR CPXIP 2X4 6000LM xxK 34734750/6047
CPX OR CPXIP 2X2 2000LM xxK120‑27750/6016
34750/6020
CPX OR CPXIP 2X2 6000LM xxK120‑27750/6055
34750/6060
CPX OR CPXIP 2X2 4000LM xxK120‑27750/6037
34750/6040
CPX OR CPXIP 2X2 ALO7 SWW7, CPX OR CPXIP S 22120‑27750/6036
34750/6038
CPX OR CPXIP 2X2 2000LM TUWH, CPX OR CPXIP TW 2X2 2000LM120‑27750/6018
34750/6023
CPX OR CPXIP2X2 3000LM TUWH, CPX OR CPXIPTW 2X2 3000LM120‑27750/6027
34750/6030
CPX OR CPXIP 2X2 4000LM TUWH, CPX OR CPXIPTW 2X2 4000LM120‑27750/6037
34750/6041
CPX OR CPXIP 2X4 3000LM xxK120‑27750/6025
34750/6029
CPX OR CPXIP 2X4 8500LM xxK120‑27750/6071
34750/6078
CPX OR CPXIP 2X4 10000LM xxK120‑27750/6088
34750/6097
CPX OR CPXIP2X4 ALO8 SWW7, CPX OR CPXIPS 24120‑27750/6051
34750/6052
CPX OR CPXIP 2X4 3000LM TUWH, CPX OR CPXIPTW 2X4 3000LM120‑27750/6027
34750/6031
CPX OR CPXIP 2X4 4000LM TUWH, CPX OR CPXIPTW 2X4 4000LM120‑27750/6036
34750/6040
CPX OR CPXIP 2X4 5000LM TUWH, CPX OR CPXIPTW 2X4 5000LM120‑27750/6045
34750/6050
CPX OR CPXIP 2X4 6000LM TUWH, CPX OR CPXIPTW 2X4 6000LM120‑27750/6057
34750/6063
CPX OR CPXIP 1X4 2000LM xxK120‑27750/6017
34750/6022
CPX OR CPXIP 1X4 4000LM xxK120‑27750/6036
34750/6040
CPX OR CPXIP 1X4 6000LM xxK120‑27750/6056
34750/6062
CPX OR CPXIP 1X4 ALO7 SWW7, CPX OR CPXIPS 14120‑27750/6034
34750/6036
CPX OR CPXIP TW 1X4 2000LM, CPX OR CPXIP1X4 2000LM TUWH120‑27750/6017
34750/6021
CPX OR CPXIP 1X4 3000LM TUWH, CPX OR CPXIP TW 1X4 3000LM120‑27750/6027
34750/6030
CPX OR CPXIP 1X4 4000LM TUWH, CPX OR CPXIP TW 1X4 4000LM120‑27750/6037
34750/6041
CPX OR CPXIP 1X4 5000LM TUWH, CPX OR CPXIP TW 1X4 5000LM120‑27750/6045
34750/6050

Notes: xx can be 27 to 65, indicating the CCT (2700K-6500K).

To the requirements of
UL 1598 (Fifth Edition; Reprint with Revisions Through and Including JANUARY 31, 2024)

These are recessed LED luminaires that are offered in lengths from 2 feet to 8 feet at 1 foot increments and may be either all LED Strip PWB or may be supplied with two LED Downlights. These downlights may be offered with one at either end of the luminaire or they may be offered side‑by‑side anywhere along the length of the luminaire. Luminaire is offered with PWBs that vary in length and number depending on the length of the luminaire.

Model(s)Input Voltage (V)Input Frequency (Hz)
S4L Series120‑27750/60

Optionally, the fixtures may be supplied with a combination of T5, T5HO or T8 fluorescent lamping in lieu of the PWBs but with the LED downlights. The lengths of the fluorescent sections shall be to the nominal fluorescent lamp length, with the downlight section length and position adjusted as required between 6” and 12” in length.  There shall be a maximum of (2) LED downlights per fixture located side by side in the center of the luminaire or with one at each end. Luminaires may be offered with optional Remote Mounted Emergency Battery Pack (EMPK) provided in a separate enclosure that is spaced a minimum of 6” away from the luminaire. Luminaires are offered as Cat. No. S4LR with Regressed Lens or Cat. No. S4LF with a Flush lens.   

This is the same as above except it is 6 inches wide instead of 4 inches wide. It is offered with the same options and accessories. Cat. No. S6LR is with a regress Lens and Cat. No. S6LF is with a Flush lens. Not provided with fluorescent options.

Model(s)Input Voltage (V)Input Frequency (Hz)
S6L Series120‑27750/60

To the requirements of
CSA C22.2 No. 250.0-21+Upd.1+Upd.2 (Fifth Edition)

PART A Type Non‑IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V or 347V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a maximum of 48 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO‑SQ 4xx for the downlight version, and EVO‑SQEL4 for the Emergency Battery w/ Integral Test Switch trim. The EVO‑SQ 4 is offered with Single Fusing (SF) Option, Occupancy Sensor/Dimming (NEPP) option, various nLight control options and Emergency Lighting Battery Pack (EL/ELR) option.

Part A

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO-SQ 4 XX/YY, EVO SQSRG, EVO SQPRT, or EVO SQFSD 4 XX/YY120‑277 or 34760

PART B Same as above, except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

Part B

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO-SQ 4 XX/YY CP, EVO SQSRG, EVO SQPRT, or EVO SQFSD 4 XX/YY CP120‑27760

PART C Type IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V or 347V, 10.1W input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a maximum of 24 LEDs.

Part C

Model(s)Input Voltage (V)Input Frequency (Hz)Input Power (W)
Cat. No. EVO4SQ XX/YY…IC –120‑277 or 3476010.1

PART D Type Non‑IC, 6 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V or 347V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting from 10 to 64 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO‑SQ 6xx for the downlight version, and EVO‑SQ EL6 for the Emergency Battery w/ Integral Test Switch trim. The EVO‑SQ 6 is offered with Single Fusing (SF) Option, Occupancy Sensor/Dimming (NEPP) option, various nLight control options and Emergency Lighting Battery Pack (EL/ELR) option.

Part D

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO-SQ 6,  EVO SQSRG, EVO SQPRT, or EVO SQFSD6, or EVO SQ YY/ZZZ120‑277 or 34760

PART E Non‑IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a max of 25 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 4xx for the downlight version and EVO‑W 4xx for the wall‑washer trim. This EVO 4 is offered with a Single Fusing (SF) Option and an nLight (NLT) control option (NPS 80 EZ module).

Part E

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. Nos. EVO SQ WDIM 4, EVO SQ TUWH 4, EVO SQ ARTC RGBW 4 (EVO DYNAMIC)120‑27760

PART F Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) / Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

PART F

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. Nos. EVO SQ WDIM 4 CP, EVO SQ TUWH 4 CP, EVO SQ ARTC RGBW 4 CP (EVO DYNAMIC CP)120‑27760

PART G Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz and Class 2 output.

PART G

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO-SQ 6 CP, EVO SQSRG, EVO SQPRT, or EVO SQFSD6 CP, or EVO SQ YY/ZZZ 6xx CP120‑27760

PART H Type IC, 6 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V or 347V input, 60 Hz, 10.1W and Class 2 output and offered with an LED Lamp Array consisting of a maximum of 24 LEDs.

PART H

Model(s)Input Voltage (V)Input Frequency (Hz)Input Power (W)
Cat. No. EVO6SQ XX/YY…IC120‑277 or 3476010.1

PART I Type Non‑IC, wall wash, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a maximum of 48 LEDs and various nLight control options. Cat. No. of the Finishing Section is SQDLW 4XX, EVO SQLW 4XX and ICO SQLW 4XX‑RFD198764 respectively.

PART I

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. SQDLW 4,  EVO SQLW 4 and ICO SQLW 4-RFD198764120‑27760

PART J Same as above except designed to meet the requirements for the City of Chicago Environment Code (CCEC) – CP (Chicago Plenum) option, 120V to 277V input, 60 Hz and Class 2 output. .

PART J

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO SQLW 4 CP120‑27760

PART K Type Non‑IC, wall wash, 6 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting from 10 to 64 LEDs and various nLight control options. Cat. No. of the Finishing Section is EVO SQLW 6XX.

Part K

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO SQLW 6 or EVO SQLW YY/ZZZ 6xx120‑27760

PART L Same as above except designed to meet the requirements for the City of Chicago Environment Code (CCEC), CP (Chicago Plenum) option, 120V to 277V input, 60 Hz and Class 2 output..

PART L

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO SQLW 6 CP or EVO SQLW YY/ZZZ 6xx CP120‑27760

PART M Type Non‑IC, downlight, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V, 60 Hz and Class 2 output and offered with a LED Lamp consisting of one COB chip. Cat. No. of the Finishing Section is EVO‑SQ 4XX. Offered with various nLight control options.

PART M

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. SQALED 4120‑27760

PART N Type Non‑IC, adjustable 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V, 60 Hz and Class 2 output and offered with an LED Lamp consisting of one COB chip. Cat. No. of the Finishing Section is SQALED ADJ 4xx. Offered with various nLight control options.

part N

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. SQALED ADJ 4120‑27760

PART O Type Non‑IC, 4 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a max of 208 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 4xx for the downlight version and EVO‑W 4xx for the wall‑washer trim. This EVO 4 is offered with a Single Fusing (SF) Option and an nLight (NL) control option (nIO EZDL CCT or NPS 80 EZ module).

part O

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO4SQ or EVO4SQLW TUWH, EVO4SQ or EVO4SQLW WDIM (EVO4 TUNABLE WHITE)120‑27760

PART P Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option, 120V to 277V input, 60 Hz. Class 2 output.

part P

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO4SQ or EVO6SQLW TUWH CP, EVO4SQ or EVO6SQLW WDIM CP (EVO4 TUNABLE WHITE CP)120‑27760

PART Q Type Non‑IC, 6 inch aperture indoor, LED Recessed Luminaire, Damp or Wet Locations, 120V to 277V input, 60 Hz and Class 2 output and offered with an LED Lamp Array consisting of a max of 208 LEDs. Also the Cat. Nos. of the Finishing Sections are EVO 4xx for the downlight version and EVO‑W 4xx for the wall‑washer trim. This EVO 4 is offered with a Single Fusing (SF) Option and an nLight (NL) control option (nIO EZDL CCT or NPS 80 EZ module).

part Q

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO6SQ or EVO6SQLW TUWH, EVO6SQ or EVO6SQLW WDIM (EVO6 TUNABLE WHITE)120‑27760

PART R Same as above except designed to meet the requirements for City of Chicago Environment Code (CCEC) Chicago Plenum (CP) option. 120V to 277V input, 60 Hz and Class 2 output.

part R

Model(s)Input Voltage (V)Input Frequency (Hz)
Cat. No. EVO6SQ or EVO6SQLW TUWH CP, EVO6SQ or EVO6SQLW WDIM CP (EVO6 TUNABLE WHITE CP)120‑27760

Note:

  1. Please refer to Report 70047209 to address additional alternate components and/or requirements for LED Recessed luminaires.
  2. Catalog No EVO SURG is representative of the following Catalog Nos.  EVO4SQSG, EVO4SQP, EVO4SQFS, EVO4SQSH, and EVO4SQCR in the 4 in product.
  3. Catalog No EVO SURG is representative of the following Catalog Nos.  EVO6SQSG, EVO6SQP, EVO6SQFS, EVO6SQSH, and EVO6SQCR in the 6 in product.
  4. All Catalog Nos in the file may be followed by addition suffixes that represent non-safety related product modifications. 
  5. Catalog Nos are equivalent and represent each other as follows:

Currently Listed Catalog Number

Equivalent Catalog Number

EVO-SQ 4 XX/YY, EVO SQSRG, EVO SQPRT, or EVO SQFSD 4 XX/YY

EVO4SQ XX/YY, EVO4SQSG, EVO4SQP, or EVO4SQFS XX/YY

EVO-SQ 4 XX/YY CP, EVO SQSRG, EVO SQPRT, or EVO SQFSD 4 XX/YY CP

EVO4SQ XX/YY CP, EVO4SQSG, EVO4SQP, or EVO4SQFS XX/YY CP

EVO-SQ 6,  EVO SQSRG, EVO SQPRT, or EVO SQFSD6, or EVO SQ YY/ZZZ 6xx

EVO6SQ,  EVO6SQSG, EVO4SQP, or EVO6SQFS, or EVO4SQ YY/ZZZ 4xx

EVO-SQ 6 CP, EVO SQSRG, EVO SQPRT, or EVO SQFSD6 CP, or EVO SQ YY/ZZZ 6xx CP

EVO6SQ CP, EVO6SQSG, EVO6SQP, or EVO6SQFS CP, or EVO6SQ YY/ZZZ 6xx CP

EVO SQLW 4

EVO4SQLW

EVO SQLW 4 CP

EVO4SQLW CP

EVO SQLW 6 or EVO SQLW YY/ZZZ 6xx

EVO6SQLW or EVO6SQLW YY/ZZZ 6xx

EVO SQLW 6 CP or EVO SQLW YY/ZZZ 6xx CP

EVO6SQLW CP or EVO6SQLW YY/ZZZ 6xx CP

  1. “YY” in Cat.No. denotes Color Temperature, “ZZZ” denotes Lumen Value and “xx” denotes Trim Color. Suffixes could be added (numbers and/or letters) to denote Trim Type, Distribution, Finish, Voltage, Options, Etc.