Customer Class File Number
Schluter Systems (Canada) Inc.
21100 ch. Ste-Marie
Ste-Anne-de-Bellevue
Quebec
Canada
H9X 3Y8
7030-01
PIPE AND PIPE FITTINGS - Floor Drains, Trench Drains, Sanitary Floor Sinks and Cleanouts
211355

 

 

Certified to CSA Standard B79

  • ABS Light duty shower drains: “KERDI-DRAIN” Models – KD2/ABS/E, KD2/ABS/EP, KD2/ABS/6E, KD2/ABS/6RE, KD2/ABS/AMGB, KD2/ABS/AKGB, KD2/ABS/ATGB, KD3/ABS/6E, KD3/ABS/6RE, KD2/ABS/ECS.
  • PVC Light Duty shower Drains: “KERDI-DRAIN” Models – KD2/PVC/E, KD2/PVC/EP, KD2/PVC/6E, KD2/PVC/6RE, KD2/PVC/AMGB, KD2/PVC/AKGB, KD2/PVC/ATGB, KD3/PVC/6E, KD3/PVC/6RE, KD2/PVC/ECS.
  • STAINLESS STEEL Light Duty shower drains: “KERDI-DRAIN” Models – KD2/E/E, KD2/E/EP, KD2/E/AMGB, KD2/E/AKGB, KD2/E/ATGB, KD2/E/6RE, KD2/E/6E, KD3/E/E, KD3/E/6E, KD3/E/6RE, KD3/E/AMGB, KD3/E/AKGB, KD3/E/ATGB, KD2/E/ECS, KD2/ECS/GR
  • STAINLESS STEEL KERDI-LINE Light duty shower drains: KLAR19 EBX, KLAR19 EPX, KLAR30 EBX, KLB 19EBX, KLB 19EPX, KLB 30EBX, KLDREX, KLIFF23EBX, KLIFE23EBX, KLIFG23EBX, KL1B19EBX or KL1BL19EBX, KL1B19EPX, KL1B30EBX, KL1AR19EBX or KL1AR30EBX, KL1AR19EPX, KL1DREX, or KL1DROEX, KL1IFF23EBX, KL1IFE23EBX, KL1IFG23EBX, KL1AR19MGSX, KL1B19MGSX.
  • STAINLESS STEEL Light Duty shower floor Cleanouts: KD-GR6C-E, KD-GR6RC-E.

STAINLESS STEEL Light Duty Grates and Frames assembly, Models: KDGIF10EBD6/GR, KDGIF10EBD5/GR, KDGIF10EBD8/GR, KDIF4GRKEBD6, KDIF4GRKEBD5, KDIF4GRKEBD8, KD4GRKECG, KD4GRKERG, KD4GRKET, KD4GRKEVG,

KDIF4GRKEBCGD5, KDIF4GRKEBRGD5, KDIF4GRKEBTD5, KDIF4GRKEBVGD5, KDIF4GRKEBCGD6, KDIF4GRKEBRGD6, KDIF4GRKEBTD6, KDIF4GRKEBVGD6

KDIF4GRKEBCGD8, KDIF4GRKEBRGD8, KDIF4GRKEBTD8, KDIF4GRKEBVGD8

KDIF4GRKMGSD5, KDIF4GRKMBWD5, KDIF4GRKTSBGD5, KDIF4GRKTSSGD5

KDIF4GRKTSCD5, KDIF4GRKTSOBD5, KDIF4GRKMGSD6, KDIF4GRKMBWD6

KDIF4GRKTSBGD6, KDIF4GRKTSSGD6, KDIF4GRKTSCD6, KDIF4GRKTSOBD6

KDIF4GRKMGSD8, KDIF4GRKMBWD8, KDIF4GRKTSBGD8, KDIF4GRKTSSGD8

KDIF4GRKTSCD8, KDIF4GRKTSOBD8.

  • Polypropylene Light Duty Floor Drain: KDF2FL
  • Stainless Steel Light Duty Floor Drains: KDF2EFL, KDF2ETHFL
  • Grate Kits: KD4GRKAMGB, KD4GRKAKGB, KD4GRKATGB, KD6GRKRE, KD6GRKE, KD4GRKECS, KD4GRKE, KD4GRKE10, KD4GRKEP.
  • Flange Kits: KD2FLKPVC, KDH2FLKPVC, KD2FLKPVC10, KD3FLKPVC, KD2FLKABS, KDH2FLKABS, KD2FLKABS10, KD3FLKABS, KD2/PVC/FL, KD3/PVC/FL, KD2/ABS/FL, KD3/ABS/FL, KD2FLKE, KD2FLKETH, KD3FLKE, KD2/E/FL, KD2/ETH/FL, KD3/E/FL, KDH2/ABS/FL, KDH2/PVC/FL

Notes

  1. Part numbers are identified using following suffixes: Size/Flange Material/Drain Grate Finish

    KD2 = 2 inch drain
    KD3 = 3 inch drain
    E = stainless steel in drain flange and/or grate
    6E = 6" stainless steel square grate
    6RE = 6" stainless steel round grate
    AMGB = Brushed brass anodized aluminum
    ATGB = Brushed Nickel anodized aluminum
    AKGB = Brushed copper/bronze anodized aluminum
    ECS = Stainless Steel covering Support EP = Polished stainless steel

 

Grate kit part numbers are identified using the following suffixes: size – grate kit – color – design – pack type

KD4/KDIF4 = 4” drain grate
KD6 = 6” drain grate
GRK = Grate Kit
E = stainless steel grate
RE = stainless steel round grate
AMGB = Brushed brass anodized aluminum
ATGB = Brushed Nickel anodized aluminum
AKGB = Brushed copper/bronze anodized aluminum
ECS = Stainless Steel covering Support
EB = Brushed stainless steel
EP = Polished stainless steel
CG = Classic Gold PVD Coating
RG = Rose Gold PVD Coating
VG = Vintage Gold PVD Coating
T = Vintage Gold PVD Coating
MGS = Matte Black Powder Coating
MBW = Matte White Powder Coating
TSBG = Greige Powder Coating
TSSG = Stone Grey Powder Coating
TSC = Cream Powder Coating
TSOB = Bronze Powder Coating
D5 = Floral design
D6 = Curve design
D8 = Pure design
10 = 10 pack 

Flange kit part numbers are identified using the following suffixes: outlet size – flange kit – material pack type

KD2 = 2” outlet flange
KDH2 – 2” horizontal outlet flange
KDF2 = 2” floor drain outlet flange
KD3 = 3” outlet flange
FL = flange kit without waterproofing accessories
FLK = flange kit with waterproofing accessories
E = stainless steel material
ETH = Stainless steel with threaded outlet
ABS = ABS material
PVC = PVC material
10 = 10 pack

2. The floor drains consist of “FL” Flange and “GR” Grate. The model numbers for the complete drain may include all or part of the model components. The drains may be packaged using different kits for grates and flanges for the tile setters and the plumbers respectively. Suffixes FL and GR added after the Model number denotes different packaging such as flange KD2/E/FL. There shall be guidelines for the customers so that only Schluter grates and flanges combination is used.

3. The Stainless Steel Drain models use 2 in no-hub outlet (Fig 18) or 3 in standard no-hub outlet (Fig. 19).
Flange KD2/ETH/FL is similar to flange KD2/E/FL except that it has threaded connections (Fig. 42). The material used for the flanges is stainless steel 304/304L. The flanges can be used with any of the listed grates. Flange Installation Instructions are detailed under Appendix 6.

4. Alternate 4 in Aluminum Grate design to include Schluter Logo with trapezoid trade mark and the modified frame which excludes the center Strut section as per Fig 16 and 17.

5. Cleanouts parts KD-GR6-E and KD-GR6R-E (CSA Certified) are a basis and an aluminum (6061 T6) disk, which is friction fitted with a PolyOne Geon C6503 Black o-ring and then covered with a stainless steel solid cover to replace the grate. The seal can be removed from the assembled covers, but it is a tight fit.

6. The grates using ECS Stainless Steel Covering support use the same materials and flange as other drains except that there is no frame and height adjustment. The lateral adjustment ring provides the necessary guides to set in the tiling guide (temporary) and corners the grate to snap into friction fit. Installation instructions are as per Appendix 4.  

 

Flange kit part numbers are identified using the following suffixes: outlet size flange kit – material – pack type 

KD2 = 2” outlet flange
KD3 = 3” outlet flange
FLK = flange kit
E = stainless steel material
ETH = Stainless steel with threaded outlet
ABS = ABS material
PVC = PVC material
10 = 10 pack

2. The floor drains consist of “FL” Flange and “GR” Grate. The model numbers for the complete drain may include all or part of the model components. The drains may be packaged using different kits for grates and flanges for the tile setters and the plumbers respectively. Suffixes FL and GR added after the Model number denotes different packaging such as flange KD2/E/FL. There shall be guidelines for the customers so that only Schluter grates and flanges combination is used.

3. The Stainless Steel Drain models use 2 in no-hub outlet (Fig 18) or 3 in standard no-hub outlet (Fig. 19).
Flange KD2/ETH/FL is similar to flange KD2/E/FL except that it has threaded connections (Fig. 42). The material used for the flanges is stainless steel 304/304L. The flanges can be used with any of the listed grates. Flange Installation Instructions are detailed under Appendix 6.

4. Alternate 4 in Aluminum Grate design to include Schluter Logo with trapezoid trade mark and the modified frame which excludes the center Strut section as per Fig 16 and 17.

5. Cleanouts parts KD-GR6-E and KD-GR6R-E (CSA Certified) are a basis and an aluminum (6061 T6) disk, which is friction fitted with a PolyOne Geon C6503 Black o-ring and then covered with a stainless steel solid cover to replace the grate. The seal can be removed from the assembled covers, but it is a tight fit.

6. The grates using ECS Stainless Steel Covering support use the same materials and flange as other drains except that there is no frame and height adjustment. The lateral adjustment ring provides the necessary guides to set in the tiling guide (temporary) and corners the grate to snap into friction fit. Installation instructions are as per Appendix 4.

 

/jp