Certification Record | CSA Group.
Customer | Class | File Number |
---|---|---|
Weco Electrical Connectors Inc.
18050 Trans-Canada Highway
Kirkland
Quebec
Canada
H9J 4A1
|
6228-01
WIRE CONNECTING DEVICES - Terminal Assemblies
|
024322_0_000
|
Last Updated:
Last Updated: October 12, 2022
Terminal Blocks, Screw tightening pressure wire connectors for PCB mounting, suitable for solid or stranded copper conductors, types:
Models | Voltage (V) | Current (A) | Spacing Group | Wire Range (AWG) | Torque (N�m) |
323-P | 300 | 30 | B | 22-10 | 0.5 |
150 | 30 | C | 22-10 | 0.5 | |
300 | 10 | D, E | 22-10 | 0.5 | |
323-P-DS | 300 | 30 | B | 22-10 | 0.5 |
150 | 30 | C | 22-10 | 0.5 | |
300 | 10 | D, E | 22-10 | 0.5 | |
324-P | 300 | 35 | B | 22-8 | 0.8 |
150 | 35 | C | 22-8 | 0.8 | |
300 | 10 | D, E | 22-8 | 0.8 | |
324-P-DS | 300 | 35 | B | 22-10 | 0.8 |
150 | 35 | C | 22-10 | 0.8 | |
300 | 10 | D, E | 22-10 | 0.8 | |
327-P | 600 | 65 | B, C | 14-4 | 1.81 |
327-P-DS | 600 | 65 | B, C | 14-6 | 1.81 |
327-PM-DS | 600 | 65 | B, C | 14-6 | 1.81 |
327-P-FU | 600 | 65 | B, C | 14-4 | 1.81 |
327-P-FU-DS | 600 | 65 | B, C | 14-6 | 1.81 |
Terminal blocks for mounting on a PCB, for stranded or solid insulated copper conductors
Models | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt (V max) |
Type 110-A-111 | 30 to 16 | B | 8 | 0.2 | 3.50 | 300 V |
110-A-111, with or without suffix /Z
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt |
110-A-112 | 30 to 16 | B | 8 | 0.2 | 3.50 | 300 V |
110-A-116 | 30 to 16 | B | 8 | 0.2 | 3.50 | 300 V |
111-A-112F | 30 to 16 | B | 8 | 0.2 | 3.81 | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt |
110-A-115 | 30 to 16 | B | 8 | 0.2 | 3.50 | 300 V |
110-A-115, with or without suffix /Z
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage | Current (A) | Group | Spacing (mm) |
110-M | 300V (SMD 150V) | 8 | B | 3.5 |
Series 110 and 111 followed by M, P, S or V
110 | -M | -1 | 1 | 1 | -THR | /02 |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
1. 110 or 111
2. M, P, S or V
3. 1, 2 or 4
4. 1 or 2
5. 1, 2, 5, 6, 7 or 8
6. THR or SMD
7. 04 to 24 / 4 to 48
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt |
111-A-111 | 30 to 16 | B | 8 | 0.2 | 3.81 | 300 V |
111-A-111, with or without suffix /Z
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage | Current (A) | Group | Spacing (mm) |
111-M | 300V (SMD 150V) | 8 | B | 3.81 |
Series 110 and 111 followed by M, P, S or V
110 | -M | -1 | 1 | 1 | -THR | /02 |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
1.110 or 111
2. M, P, S or V
3. 1, 2 or 4
4. 1 or 2
5. 1, 2, 5, 6, 7 or 8
6. THR or SMD
7. 04 to 24 / 4 to 48
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Max Volt | Use Group | Current (A max) | Spacing (mm) |
304-0022 | 10 max | 300 V | B | 25 | 8.00 |
304-11 | 10 max | 300 V | B | 25 | 8.00 |
306-11 | 10 max | 300 V | B | 25 | 8.00 |
3070-PCM/XX-XXXX-4.8 | 10 max | 300 V | B,C | 15 | 11.00 |
408-54-XBS | 10 max | 600 V | B,C | 25 | 12.5 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing (mm) | Max Volt | Use Group | Current (A max) |
306-0022 | 10 max | 8.00 | 300 V | D,E | 10 |
306-022 | 10 max | 8.00 | 300 V | B | 25 |
306-022 | 10 max | 8.00 | 300 V | D,E | 10 |
304-022 | 10 max | 8.00 | 300 V | D,E | 10 |
304-11 | 10 max | 8.00 | 300 V | D,E | 10 |
304-11-LF | 10 max | 8.00 | 300 V | B | 25 |
304-11-LF | 10 max | 8.00 | 300 V | D,E | 10 |
304-22 | 10 max | 8.00 | 300 V | D,E | 10 |
306-11-LF | 10 max | 8.00 | 300 V | D,E | 10 |
306-22 | 10 max | 8.00 | 300 V | B | 25 |
306-22 | 10 max | 8.00 | 300 V | D,E | 10 |
401-PA-6.3 | 10 max | 12.0 | 150 V | C | 25 |
401-PA-6.3 | 10 max | 12.0 | 300 V | D,E | 10 |
401-PA-XBS | 10 max | 12.0 | 300 V | B | 25 |
401-PA-XBS | 10 max | 12.0 | 300 V | D,E | 10 |
401-YBH | 10 max | 12.0 | 300 V | B | 25 |
401-YBH | 10 max | 12.0 | 300 V | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing (mm) | Current (A max) | Max Volt | Use Group |
306-022 | 10 max | 8.00 | 25 | 150 V | C |
306-11 | 10 max | 8.00 | 25 | 150 V | C |
304-022 | 10 max | 8.00 | 25 | 150 V | C |
304-11-LF | 10 max | 8.00 | 25 | 150 V | C |
304-22 | 10 max | 8.00 | 25 | 150 V | C |
306-22 | 10 max | 8.00 | 25 | 150 V | C |
401-PA-XBS | 10 max | 12.0 | 25 | 150 V | C |
401-YBH | 10 max | 12.0 | 25 | 150 V | C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt | Use Group |
2-DIN-46284-ST | 18 to 12 | 20 | 0.51 | 13.0 | 300 V | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Max Volt | Use Group | Current (A max) |
2-DIN-46284-ST | 18 to 12 | 0.51 | 13.0 | 300 V | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Use Group | Current (A max) | Max Volt |
2-DIN-46284-ST-HDS | 18 to 12 | 0.51 | 13.00 | B | 20 | 300 V |
2-DIN-46284-ST-HDS | 18 to 12 | 0.51 | 13.00 | D,E | 10 | 300 V |
423-EL | 10 max QC side 20-12 screw side | 0.51 | 14.0 | B | 20 | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Current (A max) | Use Group | Max Volt |
2-DIN-46284-ST-HDS | 18 to 12 | 0.51 | 13.00 | 20 | C | 150 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Spacing (mm) | Max Volt | Use Group |
304-0022 | 10 max | 25 | 8.00 | 150 V | C |
304-11 | 10 max | 25 | 8.00 | 300 V | B |
304-11 | 10 max | 25 | 8.00 | 150 V | C |
306-0022 | 10 max | 25 | 8.00 | 150 V | C |
306-11-LF | 10 max | 25 | 8.00 | 150 V | C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Max Volt | Spacing (mm) | Use Group | Current (A max) |
304-0022 | 10 max | 300 V | 8.00 | D,E | 10 |
304-022 | 10 max | 300 V | 8.00 | B | 25 |
304-22 | 10 max | 300 V | 8.00 | B | 25 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Spacing (mm) | Use Group | Max Volt |
306-0022 | 10 max | 25 | 8.00 | B | 300 V |
306-11-LF | 10 max | 25 | 8.00 | B | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing (mm) | Max Volt | Current (A max) | Use Group |
306-11 | 10 max | 8.00 | 300 V | 25 | D,E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing Group | Current (A max) | Spacing (mm) | Max Volt (V max) |
3070-PCM/XX-XXXX-6.3 | 10 max | B, C | 25 | 11.0 | 300 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing Group | Current (A max) | Spacing (mm) | Max Volt | Torque (N�m) |
307-PCA | 18-14 | B, C | 20 | 11.0 | 600 V | 1.2 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Spacing (mm) | Wire Range (AWG) | Max Volt | Current (A max) | Use Group |
307-PCM/XX-XXXX-6.3 | 11.0 | 10 max | 300 V | 25 | B, C |
307-PCM/XX-XXXX-4.8 | 11.0 | 10 max | 300 V | 15 | B, C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Spacing (mm) | Max Volt | Torque (N�m) | Wire Range (AWG) | Use Group |
307-PCF | 20 | 11.0 | 600 V | 1.2 | 18 to 14 | B, C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Max Volt | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) |
3-DIN-46284-ST | 300 V | 18 to 12 | B | 20 | 0.51 | 13.00 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt | Use Group |
3-DIN-46284-ST | 18 to 12 | 20 | 0.51 | 13.00 | 150 V | C |
401-PA-6.3 | 10 max | 25 | - | 12.0 | 300 V | B |
426-BL-DS | 10 max QC side 22-12 screw side | 10 | 0.51 | 14.0 | 300 V | D, E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Max Volt | Use Group | Current (A max) |
3-DIN-46284-ST | 18 to 12 | 0.51 | 13.00 | 300 V | D,E | 10 |
3-DIN-46284-ST-HDS | 18 to 12 | 0.51 | 13.00 | 300 V | B | 20 |
3-DIN-46284-ST-HDS | 18 to 12 | 0.51 | 13.00 | 300 V | D,E | 10 |
422-BL-DS | 10 max QC side 22-12 screw side | 0.51 | 14.0 | 300 V | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Current (A max) | Max Volt | Use Group |
3-DIN-46284-ST-HDS | 18 to 12 | 0.51 | 13.00 | 20 | 150 V | C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Max Volt | Use Group | Spacing (mm) |
401-LFPA-4.8 | 14 max, solder side 10 max, QC side | 15 | - | 300 V | B | 12.00 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt | Use Group |
401-LFPA-4.8 | 14 max, solder side 10 max, QC side | 15 | - | 12.00 | 150 V | C |
423-DZ-DS | 10 max QC side 22-12 screw side | 20 | 0.51 | 14.0 | 300 V | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Max Volt |
401-LFPA-4.8 | 14 max, solder side 10 max, QC side | 10 | - | 12.0 | D, E | 300 V |
2-DIN-46284-ST | 18 to 12 | 10 | 0.51 | 13.0 | D, E | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Max Volt (V max) | Use Group | Spacing (mm) |
401-LFPA-6.3 | 14 max, solder side 10 max, QC side | 15 | - | 300 V | B | 12.00 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Max Volt |
401-LFPA-6.3 | 14 max, solder side 10 max, QC side | 15 | - | 12.00 | C | 150 V |
423-DZ-DS | 10 max QC side 22-12 screw side | 10 | 0.51 | 14.0 | D, E | 300 V |
424-BL-DS | 10 max QC side 22-12 screw side | 10 | 0.51 | 14.0 | D, E | 300 V |
426-BL-DS | 10 max QC side 22-12 screw side | 20 | 0.51 | 14.0 | B | 300 V |
433-LA | 10 max QC side 22-10 screw side | 25 | 0.51 | 14.0 | B | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Spacing (mm) | Wire Range (AWG) | Max Volt | Use Group | Current (A max) |
401-LFPA-6.3 | 12.00 | 16 max, solder side 10 max, QC side | 300 V | D,E | 10 |
401-LFPVC-6.3 | 12.00 | 16 max, solder side 10 max, QC side | 300 V | D,E | 10 |
401-PA-4.8 | 12.00 | 10 max | 300 V | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Max Volt | Use Group | Current (A max) | Spacing (mm) |
401-LFPVC-4.8 | 14 max, solder side 10 max, QC side | 300 V | B | 15 | 12.00 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Spacing (mm) | Max Volt | Wire Range (AWG) | Use Group | Current (A max) |
401-LFPVC-6.3 | 12.00 | 300 V | 14 max, solder side 10 max, QC side | B | 15 |
401-PA-4.8 | 12.00 | 300 V | 10 max | B | 15 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Spacing (mm) | Wire Range (AWG) | Current (A max) | Max Volt | Use Group |
401-LFPVC-6.3 | 12.00 | 14 max, solder side 10 max, QC side | 15 | 150 V | C |
401-PA-4.8 | 12.00 | 10 max | 15 | 150 V | C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing Group | Current (A max) | Spacing (mm) | Max Volt |
408-46-6.3 | 10 max | B, C | 25 | 12.5 | 600 V |
408-46-XBS | 10 max | B, C | 25 | 12.5 | 600 V |
408-50-6.3 | 10 max | B, C | 25 | 12.5 | 600 V |
408-50-XBS | 10 max | B, C | 25 | 12.5 | 600 V |
408-54-6.3 | 10 max | B, C | 25 | 12.5 | 600 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Max Volt | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) |
422-BL | 10 max QC side 20-12 screw side | 300 V | B | 20 | 0.51 | 14 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt |
422-BL | 10 max QC side 20-12 screw side | D, E | 10 | 0.51 | 14.0 | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Max Volt (V max) | Use Group | Current (A max) |
422-BL-DS | 10 max QC side 22-12 screw side | 0.51 | 14.0 | 300 V | B | 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Use Group | Current (A max) | Wire Range (AWG) | Max Volt |
422-BZ | 0.51 | 14.0 | B | 20 | 10 max QC side 20 to 12 screw side | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Max Volt | Wire Range (AWG) | Use Group | Current (A max) |
422-BZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
422-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side,22 to 12 screw side | D,E | 10 |
422-CL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
422-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
422-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
422-CZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
422-CZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
422-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
422-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
422-DL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
422-DL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
422-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
422-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
422-DZ | 0.51 | 14.0 | 300 V | 10 max QC side,20 to 12 screw side | B | 20 |
422-DZ | 0.51 | 14.0 | 300 V | 10 max QC side,20 to 12 screw side | D,E | 10 |
422-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
422-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
422-EL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
422-EL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
422-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
422-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
422-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
422-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
422-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-BL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
423-BL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-BL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-BZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
423-BZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
423-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-CL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
423-CL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
423-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-CZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
423-CZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
423-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-DL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
423-DL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
423-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-DZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
423-DZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
424-BZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
424-BZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
424-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
424-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
424-CL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
424-CL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
424-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
424-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
424-CZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
424-CZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
424-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
424-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
424-DL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
424-DL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
424-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
424-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
424-DZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
424-DZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
424-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
424-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
424-EL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
424-EL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
424-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
424-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
424-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
424-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
424-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
426-BZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-BZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
426-BZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
426-CL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-CL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
426-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
426-CZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-CZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
426-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
426-DL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-DL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
426-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
426-DZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-DZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
426-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
426-EL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-EL | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | B | 20 |
426-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
426-EZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B | 20 |
426-EZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
426-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side 22 to 12 screw side | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Use Group | Current (A max) | Max Volt | Wire Range (AWG) |
422-BZ-DS | 0.51 | 14.0 | B | 20 | 300 V | 10 max QC side,22 to 12 screw side |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Max Volt | Use Group | Current (A max) | Wire Range (AWG) |
422-CL | 0.51 | 14.0 | 300 V | B | 20 | 10 max QC side, 20 to 12 screw side |
422-EZ | 0.51 | 14.0 | 300 V | D,E | 10 | 10 max QC side, 20 to 12 screw side |
423-BL | 0.51 | 14.0 | 300 V | B | 20 | 10 max QC side, 20 to 12 screw side |
424-EL-DS | 0.51 | 14.0 | 300 V | D,E | 10 | 10 max QC side, 22 to 12 screw side |
426-EZ-DS | 0.51 | 14.0 | 300 V | B | 20 | 10 max QC side 22 to 12 screw side |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Current (A max) | Max Volt (V max) | Use Group |
423-EL | 10 max QC side 20-12 screw side | 0.51 | 14.0 | 10 | 300 V | D,E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Max Volt | Wire Range (AWG) | Use Group | Current (A max) |
423-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
423-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
423-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
423-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
423-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-BZ | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | D,E | 10 |
425-CL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
425-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-CL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
425-CZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
425-CZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
425-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-CZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
425-DL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
425-DL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
425-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-DL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
425-DZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
425-DZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
425-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-DZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
425-EL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
425-EL | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
425-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-EL-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
425-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | B | 20 |
425-EZ | 0.51 | 14.0 | 300 V | 10 max QC side, 20 to 12 screw side | D,E | 10 |
425-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | B | 20 |
425-EZ-DS | 0.51 | 14.0 | 300 V | 10 max QC side, 22 to 12 screw side | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group |
424-BL | 10 max QC side 20-12 screw side | 300 | 20 | 0.51 | 14.0 | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Voltage (V max) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
424-BL | 10 max QC side 20-12 screw side | 300 | D, E | 10 | 0.51 | 14.0 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Current (A max) | Max Volt (V max) |
424-BL-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | B | 20 | 300 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group |
425-BL | 300 | 20 | 0.51 | 14.0 | 10 max QC side 20 to 12 screw side | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Max Volt |
425-BL | 10 | 0.51 | 14.0 | 10 max QC side 20 to 12 screw side | D, E | 300 V |
425-BL-DS | 20 | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | B | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Max Volt | Use Group | Current (A max) |
425-BL-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
425-BZ-DS | 0.51 | 14.0 | 10 max QC side, 22 to 12 screw side | 300 V | B | 20 |
425-BZ-DS | 0.51 | 14.0 | 10 max QC side, 22 to 12 screw side | 300 V | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt | Wire Range (AWG) | Use Group |
425-BZ | 20 | 0.51 | 14.0 | 300 V | 10 max QC side 20 to 12 screw side | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Max Volt | Use Group | Current (A max) | Wire Range (AWG) |
425-CL | 0.51 | 14.0 | 300 V | B | 20 | 10 max QC side, 20 to 12 screw side |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Max Volt | Use Group | Current (A max) |
426-BL | 0.51 | 14.0 | 10 max QC side , 20 to 12 screw side | 300 V | D,E | 10 |
432-ZA | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
432-ZA-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
432-ZB | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
432-ZB | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
432-ZB-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
432-ZB-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-LA-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-LA-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-LB | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-LB | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-LB-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-LB-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-ZA | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-ZA | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-ZA-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-ZA-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-ZB | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-ZB | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
433-ZB-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | B | 25 |
433-ZB-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | 300 V | D,E | 10 |
560-EN-K4DF | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
560-K4C | 1.2 | 22.5 | 20 to 12 | 300 V | B,C | 25 |
560-K4C | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
560-K4CF | 1.2 | 22.5 | 20 to 12 | 300 V | B,C | 25 |
560-K4CF | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
560-K4DF | 1.2 | 22.5 | 20 to 12 | 300 V | B,C | 25 |
560-K4DF | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
560-K4DF-V2A | 1.2 | 22.5 | 20 to 12 | 300 V | B,C | 25 |
560-K4DF-V2A | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
560-R4 | 1.2 | 22.5 | 20 to 12 | 300 V | B,C | 25 |
560-R4 | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
560-R4F | 1.2 | 22.5 | 20 to 12 | 300 V | B,C | 25 |
560-R4F | 1.2 | 22.5 | 20 to 12 | 600 V | D,E | 5 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Current (A max) | Max Volt |
426-BL | 0.51 | 14.0 | 10 max QC side 20 to 12 screw side | B | 20 | 300 V |
432-ZA-DS | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | B | 25 | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Wire Range (AWG) | Max Volt |
432-ZA | 25 | 0.51 | 14.0 | B | 10 max QC side 22 to 12 screw side | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Max Volt |
433-LA | 10 | 0.51 | 14.0 | 10 max QC side 22 to 12 screw side | D, E | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Spacing (mm) | Max Volt | Use Group | Torque (N�m) |
560-EN-K4CF | 20-12 | 25 | 22.5 | 300 V | B, C | 1.2 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt | Use Group | Wire Range (AWG) |
560-EN-K4CF | 5 | 1.2 | 22.5 | 600 V | D, E | 20 to 12 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Max. Voltage (V max) | Use Group |
Type 660-A-111 | 30 | 0.60 | 6.35 | 24 to 10 | 300 V | B |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Wire Range (AWG) |
Type 660-A-111 | 300 | 10 | 0.60 | 6.35 | D,E | 24 to 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Wire Range (AWG) |
Type 662-A-111 | 300 | 30 | 0.60 | 9.52 | B | 24 to 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Voltage (V max) | Torque (N�m) | Spacing (mm) | Use Group | Current (A max) |
Type 662-A-111 | 24-10 | 300 | 0.60 | 9.52 | D, E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group |
Type 780-A-111 | 22-16 | 300 | 10 | N/A | 5.0 | B, D, E |
Type 781-A-111 | 22-16 | 300 | 10 | N/A | 5.08 | B, D, E |
Type 876 | 22-16 | 300 | 10 | N/A | 7.5 | B, D, E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group |
Type 797-A-111 | 30-16 | 300 | 3 | N/A | 5.0 | B, D, E |
Type 797-A-112 | 30-16 | 300 | 3 | N/A | 10.0 | B, D, E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Voltage (V max) | Current (A max) | Torque (N�m) | Use Group | Spacing (mm) |
Type 797-A-121 | 30-16 | 300 | 3 | N/A | B, D, E | 5 |
Type 797-A-122 | 30-16 | 300 | 3 | N/A | B, D, E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Max. Voltage | Use Group | Current (A max) | Torque | Spacing (mm) |
Type 810-EL | 18 to 16 (solid only) | 300 V | B,D | 6 | N/A | 10 |
18 to 16 (solid only) | 150 V | C | 6 | N/A | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Max. Voltage | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) |
Type 820 | 18 to 16 solid (Spring side) | 300 V | B,D | 10 | 0.51 | 10 |
20 to 10 (Screw side) | 150 V | C | 10 | 0.51 | 10 | |
Type 821 | 18 to 16 solid (Spring side) | 300 V | B,D | 10 | 0.51 | 10 |
20 to 10 (Screw side) | 150 V | C | 10 | 0.51 | 10 | |
Type 821-DS | 18 to 16 solid (Spring side) | 300 V | B,D | 10 | 0.51 | 10 |
20 to 10 (Screw side) | 150 V | C | 10 | 0.51 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage (V) | Use Group | Current (A max) | Spacing (mm) | Max. Voltage |
Type 820-DS | 0.51 | 18 to 16 solid (Spring side) | 300 V | B, D | 10 | 10 | |
0.51 | 20 to 10 (Screw side) | C | 10 | 10 | 150 V | ||
Type 820-N | 0.51 | 18 to 16 solid (Spring side) | 300 V | B, D | 10 | 10 | |
0.51 | 20 to 10 (Screw side) | C | 10 | 10 | 150 V | ||
Type 820-N-DS | 0.51 | 18 to 16 solid (Spring side) | 300 V | B, D | 10 | 10 | |
0.51 | 20 to 10 (Screw side) | C | 10 | 10 | 150 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Max. Voltage | Use Group |
Type 874 | 22-16 | 10 | N/A | 5.0 | 300 V | B, D, E |
Type 874-DR | 22-16 | 10 | N/A | 5.0 | 300 V | B, D, E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Max. Voltage (V max) |
Type 876-DR | 22-16 | 10 | N/A | 7.5 | B, D, E | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Max. Voltage (V max) | Use Group | Spacing (mm) |
900-MIX | - | 10 | - | 300 V | B | Mixed* |
900-S-MIX | - | 10 | - | 300 | D, E | Mixed* |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Use Group | Spacing (mm) | Max. Voltage |
900-MIX | - | 6 | - | D, E | Mixed* | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Max. Voltage (V max) |
Type 900-S-10 | 15 | - | 10.0 | 22 to 16 | B | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Max. Voltage (V max) |
Type 900-S-10 | 10 | - | 10.0 | 22 to 16 | D, E | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Wire Range (AWG) | Max. Voltage (V max) |
Type 900-S-5 | 15 | - | 5.0 | B | 22 to 16 | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Current (A max) | Torque (N�m) | Spacing (mm) | Use Group | Wire Range (AWG) | Max. Voltage (V max) |
Type 900-S-5 | 10 | - | 5.0 | D, E | 22 to 16 | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Use Group | Spacing (mm) | Max. Voltage (V max) |
900-S-MIX | - | 15 | - | B | Mixed* | 300 V |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) | Max. Voltage (V max) | Use Group |
900-S-MIX-1 | - | 15 | - | Mixed* | 300 V | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Max. Voltage (V max) | Use Group | Current (A max) |
900-S-MIX-1 | - | - | Mixed* | 300 V | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group |
Type 900-S-7.5 | 300 | 15 | - | 7.5 | 22 to 16 | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group |
Type 900-S-7.5 | 300 | 10 | - | 7.5 | 22 to 16 | D, E |
Type 900-SUB-5 | 300 | 6 | - | 5.0 | 22 to 16 | B, D, E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Wire Range (AWG) | Use Group | Spacing (mm) |
900-SH-10 | 300 | 15 | - | 22 to 16 | B | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Use Group | Current (A max) |
900-SH-10 | 300 | - | 22 to 16 | 10 | D,E | 10 |
900-SH-5 | 300 | - | 22 to 16 | 5 | D,E | 10 |
900-SH-7.5 | 300 | - | 22 to 16 | 7.5 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Torque (N�m) | Wire Range (AWG) | Use Group | Current (A max) | Spacing (mm) |
900-SH-5 | 300 | - | 22 to 16 | B | 15 | 5 |
900-SH-7.5 | 300 | - | 22 to 16 | B | 15 | 7.5 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Torque (N�m) | Use Group | Current (A max) | Spacing (mm) | Wire Range |
900-SH-MIX | 300 | - | B | 15 | Mixed* | - |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Torque (N�m) | Spacing (mm) | Wire Range | Use Group | Current (A max) |
900-SH-MIX | 300 | - | Mixed* | - | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) |
900-SUB-10 | 300 | B, D, E | 6 | - | 10.0 | 22 to 16 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness.
Models | Voltage (V max) | Current (A max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group |
900-SUB-7.5 | 300 | 6 | - | 7.5 | 22 to 16 | B, D, E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Voltage (V max) | Current (A max) | Torque (N�m) | Use Group | Spacing (mm) |
900-SUB-MIX | - | 300 | 6 | - | B, D, E | Mixed* |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Torque (N�m) | Wire Range (AWG) | Use Group | Current (A max) | Spacing (mm) |
900-SUC-10 | 300 | - | 22 to 16 | B | 15 | 10 |
900-SUC-5 | 300 | - | 22 to 16 | B | 15 | 5 |
900-SUC-7.5 | 300 | - | 22 to 16 | D,E | 10 | 7.5 |
900-SUN-5 | 300 | - | 22 to 16 | B | 15 | 5 |
900-SUN-7.5 | 300 | - | 22 to 16 | B | 15 | 7.5 |
900-W-10 | 300 | - | 22 to 16 | B | 15 | 10 |
900-W-5 | 300 | - | 22 to 16 | B | 15 | 5 |
900-W-7.5 | 300 | - | 22 to 16 | B | 15 | 7.5 |
900-W-MIX | 300 | - | - | B | 15 | Mixed* |
978 | 300 | 0.51 | 26 to 12 | B | 20 | 5 |
979 | 300 | 0.51 | 26 to 12 | B | 20 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Use Group | Current (A max) |
900-SUC-10 | 300 | - | 22 to 16 | 10 | D,E | 10 |
900-SUC-5 | 300 | - | 22 to 16 | 5 | D,E | 10 |
900-SUC-7.5 | 300 | - | 22 to 16 | 7.5 | B | 15 |
900-SUN-10 | 300 | - | 22 to 16 | 10 | B | 15 |
900-SUN-5 | 300 | - | 22 to 16 | 5 | D,E | 10 |
900-SUN-7.5 | 300 | - | 22 to 16 | 7.5 | D,E | 10 |
900-W-10 | 300 | - | 22 to 16 | 10 | D,E | 10 |
900-W-5 | 300 | - | 22 to 16 | 5 | D,E | 10 |
900-W-7.5 | 300 | - | 22 to 16 | 7.5 | D,E | 10 |
900-W-MIX | 300 | - | - | Mixed* | D,E | 10 |
978 | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-EN | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-EN | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-EN-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-EN-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-ENO | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-ENO | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-ENO-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-ENO-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-HEN | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-HEN | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-HEN-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-HEN-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-HENO | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-HENO | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-HENO-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-HENO-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-MP | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-MP | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-MP-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-MP-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-T | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-T | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-T-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-T-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-THR | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-THR | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-THR-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-THR-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-TMP | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-TMP | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-TMP-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-TMP-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-TY | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-TY | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-TY-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-TY-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-Y | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-Y | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
978-Y-DS | 300 | 0.51 | 26 to 12 | 5 | B | 20 |
978-Y-DS | 300 | 0.51 | 26 to 12 | 5 | D,E | 10 |
979 | 300 | 0.51 | 26 to 12 | 10 | D,E | 10 |
979-DS | 300 | 0.51 | 26 to 12 | 10 | D,E | 10 |
979-DS | 300 | 0.51 | 26 to 12 | 10 | B | 20 |
979-EN | 300 | 0.51 | 26 to 12 | 10 | B | 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Torque (N�m) | Use Group | Current (A max) | Spacing (mm) | Wire Range |
900-SUC-MIX | 300 | - | B | 15 | Mixed* | - |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Torque (N�m) | Spacing (mm) | Wire Range | Use Group | Current (A max) |
900-SUC-MIX | 300 | - | Mixed* | - | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Torque (N�m) | Use Group | Current (A max) | Wire Range (AWG) | Spacing (mm) |
900-SUN-10 | 300 | - | D,E | 10 | 22 to 16 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) |
910 | 300 | 22 to 10 | B | 25 | 0.79 | 10 |
932 | 300 | 26 to 16 | B | 10 | 0.2 | 7 |
973-FBSP | 300 | N/A | B | 20 | N/A | 10 |
973-RFBS | 300 | 26 to 12 | D,E | 10 | 0.4 | 5 |
982-D | 300 | 20 to 12 | B | 20 | 0.79 | 9.52 |
983-D | 300 | 20 to 12 | D,E | 10 | 1.13 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Use Group | Current (A max) |
910 | 300 | 22 to 10 | 0.79 | 10 | D,E | 10 |
910-B | 300 | 22 to 10 | 0.79 | 10 | B | 25 |
910-B | 300 | 22 to 10 | 0.79 | 10 | D,E | 10 |
942 | 300 | 26 to 14 | 0.4 | 10.16 | D,E | 10 |
942-DS | 300 | 26 to 14 | 0.4 | 10.16 | B | 15 |
942-DS | 300 | 26 to 14 | 0.4 | 10.16 | D,E | 10 |
952-A-SMD | 300 | 26 to 14 | 0.4 | 10 | D,E | 10 |
952-DS | 300 | 26 to 14 | 0.4 | 10 | B | 15 |
952-DS | 300 | 26 to 14 | 0.4 | 10 | D,E | 10 |
959-HG | 300 | 26 to 14 | 0.4 | 10 | B | 15 |
959-HG | 300 | 26 to 14 | 0.4 | 10 | D,E | 10 |
959-HG-DS | 300 | 26 to 14 | 0.4 | 10 | B | 15 |
959-HG-DS | 300 | 26 to 14 | 0.4 | 10 | D,E | 10 |
959-LH | 300 | 26 to 14 | 0.4 | 10 | B | 15 |
959-LH | 300 | 26 to 14 | 0.4 | 10 | D,E | 10 |
959-LH-DS | 300 | 26 to 14 | 0.4 | 10 | B | 15 |
959-LH-DS | 300 | 26 to 14 | 0.4 | 10 | D,E | 10 |
962-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
964 | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
964-DS | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
964-DS | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
964-T | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
964-T | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
964-T-DS | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
964-T-DS | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
965 | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
965-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
965-DS | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
965-T | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
965-T | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
965-T-DS | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
965-T-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
968 | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-DS | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
968-DS | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-T | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
968-T | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-T-DS | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
968-T-DS | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-TY | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
968-TY | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-TY-DS | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
968-TY-DS | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-Y | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
968-Y | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-Y-DS | 300 | 26 to 12 | 0.51 | 5.08 | D,E | 10 |
968-Y-DS | 300 | 26 to 12 | 0.51 | 5.08 | B | 20 |
969-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
969-T | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
969-T | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
969-T-DS | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
969-T-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
969-TY | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
969-TY | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
969-TY-DS | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
969-TY-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
969-Y | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
969-Y | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
969-Y-DS | 300 | 26 to 12 | 0.51 | 10.16 | B | 20 |
969-Y-DS | 300 | 26 to 12 | 0.51 | 10.16 | D,E | 10 |
973-FBSP | 300 | N/A | N/A | 10 | D,E | 10 |
973-FBWP | 300 | N/A | N/A | 10 | D,E | 10 |
973-FBWP | 300 | N/A | N/A | 10 | B | 20 |
974 | 300 | 26 to 12 | 0.51 | 5 | D,E | 10 |
975 | 300 | 26 to 12 | 0.51 | 10 | D,E | 10 |
975-DS | 300 | 26 to 12 | 0.51 | 10 | B | 20 |
975-DS | 300 | 26 to 12 | 0.51 | 10 | D,E | 10 |
976 | 300 | 26 to 12 | 0.51 | 7.5 | D,E | 10 |
976-DS | 300 | 26 to 12 | 0.51 | 7.5 | B | 20 |
976-DS | 300 | 26 to 12 | 0.51 | 7.5 | D,E | 10 |
982-D | 300 | 20 to 12 | 0.79 | 9.52 | D,E | 10 |
983-D | 300 | 20 to 12 | 1.13 | 10 | B | 20 |
983-F-with screw | 300 | 20 to 12 | 1.13 | 10 | B | 20 |
990-DS | 300 | 22 to 14 | 0.51 | 5 | D,E | 10 |
990-FU-DS | 300 | 22 to 14 | 0.51 | 5 | B | 15 |
990-FU-DS | 300 | 22 to 14 | 0.51 | 5 | D,E | 10 |
992-FU-DS | 300 | 22 to 14 | 0.51 | 10 | B | 15 |
992-FU-DS | 300 | 22 to 14 | 0.51 | 10 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Use Group | Current (A max) |
910-B-DS | 300 | 0.79 | 10 | 26 to 10 | B | 25 |
910-B-DS | 300 | 0.79 | 10 | 26 to 10 | D,E | 10 |
910-DS | 300 | 0.79 | 10 | 26 to 10 | B | 25 |
910-DS | 300 | 0.79 | 10 | 26 to 10 | D,E | 10 |
910-Y | 300 | 0.79 | 10 | 22 to 10 | B | 25 |
910-Y | 300 | 0.79 | 10 | 22 to 10 | D,E | 10 |
910-Y-DS | 300 | 0.79 | 10 | 26 to 10 | B | 25 |
910-Y-DS | 300 | 0.79 | 10 | 26 to 10 | D,E | 10 |
959-T | 300 | 0.4 | 10 | 20 to 14 | B | 15 |
959-T | 300 | 0.4 | 10 | 20 to 14 | D,E | 10 |
959-T-DS | 300 | 0.4 | 10 | 26 to 14 | B | 15 |
959-T-DS | 300 | 0.4 | 10 | 26 to 14 | D,E | 10 |
959-T-HG | 300 | 0.4 | 10 | 26 to 14 | B | 15 |
959-T-HG | 300 | 0.4 | 10 | 26 to 14 | D,E | 10 |
959-T-HG-DS | 300 | 0.4 | 10 | 26 to 14 | D,E | 10 |
959-T-HG-DS | 300 | 0.4 | 10 | 26 to 14 | B | 15 |
970-B-2.8 | 300 | 0.51 | 5 | 22-10 | B,D,E | 6 |
970-B-2.8-DS | 300 | 0.51 | 5 | 22-10 | B,D,E | 6 |
970-DS | 300 | 0.51 | 5 | 26 to 12 | B | 20 |
970-DS | 300 | 0.51 | 5 | 26 to 12 | D,E | 10 |
970-EN | 300 | 0.51 | 5 | 26 to 12 | B | 20 |
970-EN | 300 | 0.51 | 5 | 26 to 12 | D,E | 10 |
970-EN-DS | 300 | 0.51 | 5 | 26 to 12 | B | 20 |
970-EN-DS | 300 | 0.51 | 5 | 26 to 12 | D,E | 10 |
970-ENO | 300 | 0.51 | 5 | 26 to 12 | D,E | 10 |
970-ENO | 300 | 0.51 | 5 | 26 to 12 | B | 20 |
970-ENO-DS | 300 | 0.51 | 5 | 26 to 12 | B | 20 |
970-ENO-DS | 300 | 0.51 | 5 | 26 to 12 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Torque (N�m) | Wire Range (AWG) | Voltage (V max) | Use Group | Current (A max) | Spacing (mm) |
912 | 0.79 | 22 to 10 | 600 | B,C | 25 | 20 |
912-B | 0.79 | 22 to 10 | 600 | B,C | 25 | 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Torque (N�m) | Voltage (V max) | Use Group | Current (A max) | Spacing (mm) | Wire Range (AWG) |
912-B-DS | 0.79 | 600 | B,C | 25 | 20 | 26 to 10 |
912-DS | 0.79 | 600 | B,C | 25 | 20 | 26 to 10 |
912-Y | 0.79 | 600 | B,C | 25 | 20 | 22 to 10 |
912-Y-DS | 0.79 | 600 | B,C | 25 | 20 | 26 to 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Voltage (V max) | Use Group | Current (A max) | Torque (N�m) | Spacing (mm) |
930 | 26 to 16 | 300 | B | 10 | 0.2 | 3.5 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Use Group | Torque (N�m) | Spacing (mm) | Voltage (V max) | Current (A max) |
930-A-SMD | 26 to 16 | B | 0.2 | 3.5 | 150 | 7 |
930-DS | 26 to 16 | B | 0.2 | 3.5 | 300 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Use Group | Torque (N�m) | Spacing (mm) | Current (A max) | Voltage (V max) |
930-D-SMD | 26 to 16 | B | 0.2 | 3.5 | 10 | 150 |
930-D-SMD-DS | 26 to 16 | B | 0.2 | 3.5 | 10 | 150 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Voltage (V max) | Current (A max) |
930-FL | B | 0.2 | 3.5 | 30 to 18 | 300 | 6 |
930-FL-DS | B | 0.2 | 3.5 | 30 to 18 | 300 | 6 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Torque (N�m) | Spacing (mm) | Voltage (V max) | Current (A max) | Wire Range (AWG) |
930-HFL | B | 0.2 | 3.5 | 300 | 6 | 28 to 18 |
930-HFL-DS | B | 0.2 | 3.5 | 300 | 6 | 28 to 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Spacing (mm) | Voltage (V max) | Current (A max) | Wire Range (AWG) | Torque (N�m) |
930-HSL | B | 3.5 | 300 | 6 | N/A | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Spacing (mm) | Voltage (V max) | Wire Range (AWG) | Current (A max) | Torque (N�m) |
930-T | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
930-T-DS | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
930-THR | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
930-THR-DS | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
931 | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
931-A-LFDS | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
931-DS | B | 3.5 | 300 | 26 to 16 | 10 | 0.2 |
931-FST | B | 3.5 | 300 | N/A | 6 | N/A |
931-HSL | B | 3.5 | 300 | N/A | 6 | N/A |
931-SLS | B | 3.5 | 300 | N/A | 6 | N/A |
931-SLR-1.1 | B | 3.5 | 300 | N/A | 6 | N/A |
931-SLR-THR-1.1 | B | 3.5 | 300 | N/A | 6 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Spacing (mm) | Wire Range (AWG) | Current (A max) | Torque (N�m) | Voltage (V max) |
931-SLR | B | 3.5 | N/A | 6 | N/A | 150 |
931-SLR-1.3 | B | 3.5 | N/A | 6 | N/A | 150 |
931-SLR-THR | B | 3.5 | N/A | 6 | N/A | 150 |
931-SLR-THR-1.3 | B | 3.5 | N/A | 6 | N/A | 150 |
931-SLR-SMD-1.1 | B | 3.5 | N/A | 6 | N/A | 150 |
931-SLR-SMD-1.3 | B | 3.5 | N/A | 6 | N/A | 150 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Wire Range (AWG) | Current (A max) | Torque (N�m) | Voltage (V max) | Use Group |
931-SLR | 3.5 | N/A | 6 | N/A | 300 | D |
931-SLR-1.3 | 3.5 | N/A | 6 | N/A | 300 | D |
931-SLR-THR | 3.5 | N/A | 6 | N/A | 300 | D |
931-SLR-THR-1.3 | 3.5 | N/A | 6 | N/A | 300 | D |
931-SLR-SMD-1.1 | 3.5 | N/A | 6 | N/A | 300 | D |
931-SLR-SMD-1.3 | 3.5 | N/A | 6 | N/A | 300 | D |
972-HEN | 10 | 26 to 12 | 20 | 0.51 | 150 | C |
972-HEN-DS | 10 | 26 to 12 | 20 | 0.51 | 300 | B |
972-HEN-DS | 10 | 26 to 12 | 20 | 0.51 | 150 | C |
972-HENO | 10 | 26 to 12 | 20 | 0.51 | 300 | B |
972-HENO | 10 | 26 to 12 | 20 | 0.51 | 150 | C |
972-HENO-DS | 10 | 26 to 12 | 20 | 0.51 | 300 | B |
972-HENO-DS | 10 | 26 to 12 | 20 | 0.51 | 150 | C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Voltage (V max) | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) |
931-T | 3.5 | 300 | 26 to 16 | B | 10 | 0.2 |
931-T-DS | 3.5 | 300 | 26 to 16 | B | 10 | 0.2 |
972-HEN | 10 | 300 | 26 to 12 | B | 20 | 0.51 |
972-KA | 10 | 300 | N/A | D,E | 10 | N/A |
972-LH | 10 | 300 | 26 to 12 | B | 20 | 0.51 |
972-NFBW | 10 | 300 | 26 to 12 | B | 20 | 0.4 |
972-SV | 10 | 300 | 26 to 12 | B | 20 | 0.51 |
973-FB | 10 | 300 | N/A | B | 20 | N/A |
973-FBS | 10 | 300 | 26 to 12 | B | 20 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Use Group | Torque (N�m) | Voltage (V max) | Current (A max) | Spacing (mm) |
932-A-SMD | 26 to 16 | B | 0.2 | 150 | 7 | 3.5 |
932-DS | 26 to 16 | B | 0.2 | 300 | 10 | 7 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Torque (N�m) | Voltage (V max) | Wire Range (AWG) | Current (A max) | Spacing (mm) |
932-FL | B | 0.2 | 300 | 30 to 18 | 6 | 7 |
932-FL-DS | B | 0.2 | 300 | 30 to 18 | 6 | 7 |
934 | B | 0.2 | 300 | 26 to 16 | 10 | 3.5 |
934-DS | B | 0.2 | 300 | 26 to 16 | 10 | 3.5 |
934-THR | B | 0.2 | 300 | 26 to 16 | 10 | 3.5 |
934-THR-DS | B | 0.2 | 300 | 26 to 16 | 10 | 3.5 |
935-DS | B | 0.2 | 300 | 26 to 16 | 10 | 7 |
935 | B | 0.2 | 300 | 26 to 16 | 10 | 7 |
938-DS | B | 0.2 | 300 | 26 to 16 | 10 | 3.5 |
938 | B | 0.2 | 300 | 26 to 16 | 10 | 3.5 |
939 | B | 0.2 | 300 | 26 to 16 | 10 | 7 |
939-DS | B | 0.2 | 300 | 26 to 16 | 10 | 7 |
939-T | B | 0.2 | 300 | 26 to 16 | 10 | 7 |
939-T-DS | B | 0.2 | 300 | 26 to 16 | 10 | 7 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Torque (N�m) | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Current (A max) |
932-T | B | 0.2 | 300 | 7 | 26 to 16 | 10 |
932-T-DS | B | 0.2 | 300 | 7 | 26 to 16 | 10 |
933 | B | 0.2 | 300 | 7 | 26 to 16 | 10 |
933-DS | B | 0.2 | 300 | 7 | 26 to 16 | 10 |
933-T | B | 0.2 | 300 | 7 | 26 to 16 | 10 |
933-T-DS | B | 0.2 | 300 | 7 | 26 to 16 | 10 |
938-FL | B | 0.2 | 300 | 3.5 | 28 to 18 | 6 |
938-T | B | 0.2 | 300 | 3.5 | 26 to 16 | 10 |
938-T-DS | B | 0.2 | 300 | 3.5 | 26 to 16 | 10 |
938-THR | B | 0.2 | 300 | 3.5 | 26 to 16 | 10 |
938-THR-DS | B | 0.2 | 300 | 3.5 | 26 to 16 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Torque (N�m) | Voltage (V max) | Spacing (mm) | Current (A max) | Wire Range (AWG) |
938-FL-DS | B | 0.2 | 300 | 3.5 | 6 | 28 to 20 |
938-HFL | B | 0.2 | 300 | 3.5 | 6 | 28 to 18 |
938-HFL-DS | B | 0.2 | 300 | 3.5 | 6 | 28 to 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Voltage (V max) | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) |
940 | B | 300 | 26 to 14 | 15 | 0.4 | 5.08 |
940-DS | B | 300 | 26 to 14 | 15 | 0.4 | 5.08 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Voltage (V max) | Spacing (mm) | Wire Range | Current (A max) | Torque |
940-FB | B | 300 | 5.08 | N/A | 7 | N/A |
941-FB | B | 300 | 5.08 | N/A | 7 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Voltage (V max) | Spacing (mm) | Current (A max) | Wire Range (AWG) | Torque (N�m) |
940-SV | B | 300 | 5.08 | 7 | 26 to 14 | 0.4 |
940-SV-DS | B | 300 | 5.08 | 7 | 26 to 14 | 0.4 |
941-SV | B | 300 | 5.08 | 7 | 26 to 14 | 0.4 |
941-SV-DS | B | 300 | 5.08 | 7 | 26 to 14 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Current (A max) |
940-T | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
940-T-DS | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
941 | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
941-12A | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
941-DS | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
941-T | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
941-T-DS | B | 300 | 5.08 | 26 to 14 | 0.4 | 15 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Use Group | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Current (A max) | Spacing (mm) |
942 | B | 300 | 26 to 14 | 0.4 | 15 | 10.16 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range | Use Group | Current (A max) | Torque |
942-FB | 300 | 10.16 | N/A | B | 7 | N/A |
943-FB | 300 | 10.16 | N/A | B | 7 | N/A |
952-FB | 300 | 10 | N/A | B | 7 | N/A |
953-FB | 300 | 10 | N/A | B | 7 | N/A |
962-FB | 300 | 10.16 | N/A | B | 20 | N/A |
963-FB | 300 | 10.16 | N/A | B | 20 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Use Group | Current (A max) | Wire Range (AWG) | Torque (N�m) |
942-SV | 300 | 10.16 | B | 7 | 26 to 14 | 0.4 |
942-SV-DS | 300 | 10.16 | B | 7 | 26 to 14 | 0.4 |
943-SV | 300 | 10.16 | B | 7 | 26 to 14 | 0.4 |
943-SV-DS | 300 | 10.16 | B | 7 | 26 to 14 | 0.4 |
952-SV | 300 | 10 | B | 7 | 26 to 14 | 0.4 |
952-SV-DS | 300 | 10 | B | 7 | 26 to 14 | 0.4 |
952-SVG | 300 | 10 | B | 7 | 26 to 14 | 0.4 |
952-SVG-DS | 300 | 10 | B | 7 | 26 to 14 | 0.4 |
953-SV | 300 | 10 | B | 7 | 26 to 14 | 0.4 |
953-SV-DS | 300 | 10 | B | 7 | 26 to 14 | 0.4 |
963-SV | 300 | 10.16 | D,E | 10 | 26 to 12 | 0.51 |
971-LH | 300 | 5 | B | 20 | 26 to 12 | 0.51 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Use Group | Wire Range (AWG) | Torque (N�m) | Current (A max) |
942-T | 300 | 10.16 | B | 26 to 14 | 0.4 | 15 |
943-T | 300 | 10.16 | B | 26 to 14 | 0.4 | 15 |
952-T | 300 | 10 | B | 26 to 14 | 0.4 | 15 |
953-T | 300 | 10 | B | 26 to 14 | 0.4 | 15 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Use Group | Current (A max) |
942-T | 300 | 10.16 | 26 to 14 | 0.4 | D,E | 10 |
942-T-DS | 300 | 10.16 | 26 to 14 | 0.4 | B | 15 |
942-T-DS | 300 | 10.16 | 26 to 14 | 0.4 | D,E | 10 |
943 | 300 | 10.16 | 26 to 14 | 0.4 | B | 15 |
943 | 300 | 10.16 | 26 to 14 | 0.4 | D,E | 10 |
943-DS | 300 | 10.16 | 26 to 14 | 0.4 | B | 15 |
943-DS | 300 | 10.16 | 26 to 14 | 0.4 | D,E | 10 |
943-T | 300 | 10.16 | 26 to 14 | 0.4 | D,E | 10 |
943-T-DS | 300 | 10.16 | 26 to 14 | 0.4 | B | 15 |
943-T-DS | 300 | 10.16 | 26 to 14 | 0.4 | D,E | 10 |
952-T | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
952-T-DS | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
952-T-DS | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
952-TFL-DS | 300 | 10 | 26 to 14 | 0.4 | B,D,E | 10 |
953 | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
953 | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-B-SV | 300 | 10 | 26 to 14 | 0.4 | B | 7 |
953-B-SV-DS | 300 | 10 | 26 to 14 | 0.4 | B | 7 |
953-DS | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
953-DS | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-HG | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-HG-DS | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
953-HG-DS | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-T | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-T-DS | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
953-T-DS | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-THG | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
953-THG | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
953-THG-DS | 300 | 10 | 26 to 14 | 0.4 | B | 15 |
953-THG-DS | 300 | 10 | 26 to 14 | 0.4 | D,E | 10 |
960-FB | 300 | 5.08 | N/A | N/A | D,E | 10 |
960-SV | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-SV-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
960-SV-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-T | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
960-T | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-T-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
960-T-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-TY | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
960-TY-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
960-TY-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-Y | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
960-Y | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-Y-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
960-Y-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
961 | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
961 | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
961-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
961-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
961-SV | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
961-SV-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
961-SV-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
961-T | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
961-T | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
961-T-DS | 300 | 5.08 | 26 to 12 | 0.51 | B | 20 |
961-T-DS | 300 | 5.08 | 26 to 12 | 0.51 | D,E | 10 |
962-SV | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-SV | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-SV-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-SV-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-T | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-T | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-T-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-T-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-TY | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-TY | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-TY-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-TY-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-Y | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-Y | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
962-Y-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
962-Y-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
963 | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
963 | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
963-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
963-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
963-SV | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
963-SV-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
963-SV-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
963-T | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
963-T | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
963-T-DS | 300 | 10.16 | 26 to 12 | 0.51 | B | 20 |
963-T-DS | 300 | 10.16 | 26 to 12 | 0.51 | D,E | 10 |
970-FBW | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
970-FBW-DS | 300 | 5 | 26 to 12 | 0.4 | B | 20 |
970-FBW-DS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
970-HEN | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-HEN-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-HEN-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-HENO | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-HENO | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-HENO-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-HENO-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-KA | 300 | 5 | N/A | N/A | D,E | 10 |
970-KB | 300 | 5 | N/A | N/A | D,E | 10 |
970-KB | 300 | 5 | N/A | N/A | B | 20 |
970-KE | 300 | 5 | N/A | N/A | B | 20 |
970-KE | 300 | 5 | N/A | N/A | D,E | 10 |
970-LH | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-LH-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-LH-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-MP | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-MP | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-MP-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-MP-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-NFBW | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
970-NFBW-DS | 300 | 5 | 26 to 12 | 0.4 | B | 20 |
970-NFBW-DS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
970-SV | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-SV-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-SV-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-T | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-T | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-T-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-T-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-THR | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-THR | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-THR-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-THR-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-TMP | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-TMP | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-TMP-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-TMP-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-TX | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-TX | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-TX-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-TX-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-TY | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-TY | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-TY-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-TY-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-X | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-X | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-X-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-X-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-Y | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-Y | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
970-Y-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
970-Y-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971 | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971 | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-DOP | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-DOP-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-DOPG | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-DOPG-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-DOP | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-DOP-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-DOPG | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-DOPG-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-FB | 300 | 5 | N/A | N/A | D,E | 10 |
971-FBS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
971-FBS-DS | 300 | 5 | 26 to 12 | 0.4 | B | 20 |
971-FBS-DS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
971-FBSP | 300 | 5 | N/A | N/A | B | 20 |
971-FBSP | 300 | 5 | N/A | N/A | D,E | 10 |
971-FBWP | 300 | 5 | N/A | N/A | D,E | 10 |
971-FBWP | 300 | 5 | N/A | N/A | B | 20 |
971-HG | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-HG-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-HG-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-HM | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-HM | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-HM-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-HM-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-KRFBS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
971-KRFBS-DS | 300 | 5 | 26 to 12 | 0.4 | B | 20 |
971-KRFBS-DS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
971-LH | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-LH-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-LH-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-RFBS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
971-RFBS-DS | 300 | 5 | 26 to 12 | 0.4 | B | 20 |
971-RFBS-DS | 300 | 5 | 26 to 12 | 0.4 | D,E | 10 |
971-SV | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-SV-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-SV-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-T | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-T | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-T-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-T-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-THG | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-THG | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-THG-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-THG-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-THM | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-THM | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-THM-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-THM-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-THR | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-THR | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-THR-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-THR-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-TX | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-TX | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-TX-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-TX-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-X | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
971-X | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-X-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
971-X-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
973-HG | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-HG-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-HG-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-HM | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-HM | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-HM-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-HM-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-LH | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-LH-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-LH-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-SV | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-SV-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-SV-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-T | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-T | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-T-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THG | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THG | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-THG-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THG-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-THM | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THM | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-THM-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THM-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-THR | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THR | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-THR-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-THR-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-TX | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-TX | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-TX-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-TX-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-X | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
973-X | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-X-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
973-X-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
974-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
974-FB | 300 | 5 | N/A | N/A | D,E | 10 |
974-T | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
974-T-DS | 300 | 5 | 26 to 12 | 0.51 | B | 20 |
974-T-DS | 300 | 5 | 26 to 12 | 0.51 | D,E | 10 |
975-FB | 300 | 10 | N/A | N/A | D,E | 10 |
975-T | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
975-T-DS | 300 | 10 | 26 to 12 | 0.51 | B | 20 |
975-T-DS | 300 | 10 | 26 to 12 | 0.51 | D,E | 10 |
976-FB | 300 | 7.5 | N/A | N/A | D,E | 10 |
976-T | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
976-T-DS | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
976-T-DS | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977 | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977 | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977-DS | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977-DS | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977-OP | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977-OP | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977-OP-DS | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977-OP-DS | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977-OPSG | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977-OPSG | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977-OPSG-DS | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977-OPSG-DS | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
977-T | 300 | 7.5 | 26 to 12 | 0.51 | B | 20 |
977-T | 300 | 7.5 | 26 to 12 | 0.51 | D,E | 10 |
982-F-4.8 | 300 | 9.52 | N/A | N/A | B | 15 |
982-F-4.8 | 300 | 9.52 | N/A | N/A | D,E | 10 |
982-MF-4.8 | 300 | 9.52 | 20 to 12 | 0.79 | B | 15 |
982-MF-4.8 | 300 | 9.52 | 20 to 12 | 0.79 | D,E | 10 |
982-ML | 300 | 9.52 | 20 to 12 | 0.79 | B | 20 |
982-ML | 300 | 9.52 | 20 to 12 | 0.79 | D,E | 10 |
982-S | 300 | 9.52 | 20 to 12 | 0.79 | D,E | 10 |
982-S | 300 | 9.52 | 20 to 12 | 0.79 | B | 20 |
982-SMF-2.8 | 300 | 9.52 | 20 to 12 | 0.79 | B,D,E | 6 |
982-SMF-4.8 | 300 | 9.52 | 20 to 12 | 0.79 | B | 15 |
982-SMF-4.8 | 300 | 9.52 | 20 to 12 | 0.79 | D,E | 10 |
982-SML | 300 | 9.52 | 20 to 12 | 0.79 | B | 20 |
982-SML | 300 | 9.52 | 20 to 12 | 0.79 | D,E | 10 |
982-W | 300 | 9.52 | 20 to 12 | 0.79 | B | 20 |
982-W | 300 | 9.52 | 20 to 12 | 0.79 | D,E | 10 |
983-F-4.8 | 300 | 10 | N/A | N/A | B | 15 |
983-F-4.8 | 300 | 10 | N/A | N/A | D,E | 10 |
983-MF-4.8 | 300 | 10 | 20 to 12 | 1.13 | B | 15 |
983-MF-4.8 | 300 | 10 | 20 to 12 | 1.13 | D,E | 10 |
983-ML | 300 | 10 | 20 to 12 | 1.13 | B | 20 |
983-ML | 300 | 10 | 20 to 12 | 1.13 | D,E | 10 |
983-S | 300 | 10 | 20 to 12 | 1.13 | B | 20 |
983-S | 300 | 10 | 20 to 12 | 1.13 | D,E | 10 |
983-SC | 300 | 10 | 20 to 12 | 1.13 | B | 20 |
983-SC | 300 | 10 | 20 to 12 | 1.13 | D,E | 10 |
983-SMF-2.8 | 300 | 10 | 20 to 12 | 1.13 | B,D,E | 6 |
983-SMF-4.8 | 300 | 10 | 20 to 12 | 1.13 | D,E | 10 |
983-SMF-4.8 | 300 | 10 | 20 to 12 | 1.13 | B | 15 |
983-SML | 300 | 10 | 20 to 12 | 1.13 | B | 20 |
983-SML | 300 | 10 | 20 to 12 | 1.13 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Use Group | Current (A max) | Spacing (mm) |
950 | 300 | 26 to 14 | 0.4 | B | 15 | 5 |
950-A-SMD | 300 | 26 to 14 | 0.4 | B | 15 | 5 |
950-D-SMD-DS | 300 | 26 to 14 | 0.4 | B | 15 | 5 |
950-DS | 300 | 26 to 14 | 0.4 | B | 15 | 5 |
952 | 300 | 26 to 14 | 0.4 | D,E | 10 | 10 |
954-NLFL-DS | 300 | 26 to 14 | 0.4 | B | 10 | 5 |
958-NAF-DS | 300 | 26 to 14 | 0.4 | B | 10 | 5.00 |
958-NLFL-DS | 300 | 26 to 14 | 0.4 | B | 10 | 5.00 |
958-RFL-DS | 300 | 26 to 14 | 0.4 | B | 10 | 5.00 |
959-DS | 300 | 26 to 14 | 0.4 | B | 15 | 10 |
959 | 300 | 26 to 14 | 0.4 | B | 15 | 10 |
959 | 300 | 26 to 14 | 0.4 | D,E | 10 | 10 |
959-DS | 300 | 26 to 14 | 0.4 | D,E | 10 | 10 |
962 | 300 | 26 to 12 | 0.51 | D,E | 10 | 10.16 |
962 | 300 | 26 to 12 | 0.51 | B | 20 | 10.16 |
962-DS | 300 | 26 to 12 | 0.51 | B | 20 | 10.16 |
964 | 300 | 26 to 12 | 0.51 | B | 20 | 5.08 |
965 | 300 | 26 to 12 | 0.51 | B | 20 | 10.16 |
968 | 300 | 26 to 12 | 0.51 | B | 20 | 5.08 |
969 | 300 | 26 to 12 | 0.51 | B | 20 | 10.16 |
969 | 300 | 26 to 12 | 0.51 | D,E | 10 | 10.16 |
970 | 300 | 26 to 12 | 0.51 | D,E | 10 | 5 |
970 | 300 | 26 to 12 | 0.51 | B | 20 | 5 |
972 | 300 | 26 to 12 | 0.51 | B | 20 | 10 |
972 | 300 | 26 to 12 | 0.51 | D,E | 10 | 10 |
972-DS | 300 | 26 to 12 | 0.51 | D,E | 10 | 10 |
972-EN | 300 | 26 to 12 | 0.51 | D,E | 10 | 10 |
973-FBS-DS | 300 | 26 to 12 | 0.4 | B | 20 | 10 |
973-FBS-DS | 300 | 26 to 12 | 0.4 | D,E | 10 | 5 |
973-KRFBS | 300 | 26 to 12 | 0.4 | D,E | 10 | 5 |
973-KRFBS-DS | 300 | 26 to 12 | 0.4 | B | 20 | 10 |
973-KRFBS-DS | 300 | 26 to 12 | 0.4 | D,E | 10 | 5 |
973-RFBS | 300 | 26 to 12 | 0.4 | B | 20 | 10 |
973-RFBS-DS | 300 | 26 to 12 | 0.4 | B | 20 | 10 |
973-RFBS-DS | 300 | 26 to 12 | 0.4 | D,E | 10 | 5 |
974 | 300 | 26 to 12 | 0.51 | B | 20 | 5 |
975 | 300 | 26 to 12 | 0.51 | B | 20 | 10 |
976 | 300 | 26 to 12 | 0.51 | B | 20 | 7.5 |
992-DS | 300 | 22 to 14 | 0.51 | B | 15 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Wire Range (AWG) | Current (A max) | Torque |
950-FB | 300 | B | 5 | N/A | 7 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Wire Range | Current (A max) | Torque (N�m) |
950-FL-DS | 300 | B | 5 | 26 to 14 | 10 | 0.4 |
950-GFL-DS | 300 | B | 5 | 26 to 14 | 10 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Wire Range | Torque (N�m) | Current (A max) |
950-LH | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
950-LH-DS | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
950-NAF-DS | 300 | B | 5 | 26 to 14 | 0.4 | 10 |
950-NLFL-DS | 300 | B | 5 | 26 to 14 | 0.4 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Torque (N�m) | Wire Range | Current (A max) |
950-PFB | 300 | B | 5 | 0.4 | N/A | 7 |
950-PFB-DS | 300 | B | 5 | 0.4 | N/A | 7 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Torque (N�m) | Current (A max) | Wire Range (AWG) |
950-NLFL-DS/XX-TB or TB-PM, or TH or TH-PM | 300 | B | 5 | 0.4 | 10 | 26 to 14 |
950-SLK | 300 | B | 5 | 0.4 | 10 | N/A |
950-SLS | 300 | B | 5 | 0.4 | 10 | N/A |
950-SLS/XX-H7.0 | 300 | B | 5 | 0.4 | 10 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Torque (N�m) | Wire Range (AWG) | Current (A max) |
950-RFL-DS | 300 | B | 5 | 0.4 | 26 to 14 | 10 |
950-SV | 300 | B | 5 | 0.4 | 26 to 14 | 7 |
950-SV-DS | 300 | B | 5 | 0.4 | 26 to 14 | 7 |
950-SVG | 300 | B | 5 | 0.4 | 26 to 14 | 7 |
950-SVG-DS | 300 | B | 5 | 0.4 | 26 to 14 | 7 |
950-T | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
950-T-DS | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
950-TFL-DS | 300 | B | 5 | 0.4 | 26 to 14 | 10 |
950-THR | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
950-THR-DS | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
951 | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
951-A-LFDS | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
951-B-SV | 300 | B | 5 | 0.4 | 26 to 14 | 7 |
951-B-SV-DS | 300 | B | 5 | 0.4 | 26 to 14 | 7 |
951-DS | 300 | B | 5 | 0.4 | 26 to 14 | 15 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Wire Range | Current (A max) | Torque |
951-FB | 300 | B | 5 | N/A | 7 | N/A |
951-PFB | 300 | B | 5 | N/A | 7 | N/A |
951-PFB-DS | 300 | B | 5 | N/A | 7 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Wire Range (AWG) | Current (A max) | Torque (N�m) |
951-HG | 300 | B | 5 | 26 to 14 | 15 | 0.4 |
951-HG-DS | 300 | B | 5 | 26 to 14 | 15 | 0.4 |
951-LH | 300 | B | 5 | 26 to 14 | 15 | 0.4 |
951-LH-DS | 300 | B | 5 | 26 to 14 | 15 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Current (A max) | Wire Range (AWG) | Torque (N�m) |
951-SV | 300 | B | 5 | 7 | 26 to 14 | 0.4 |
951-SV-DS | 300 | B | 5 | 7 | 26 to 14 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Current (A max) |
951-T | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
951-T-DS | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
951-THG | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
951-THG-DS | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
951-THR | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
951-THR-DS | 300 | B | 5 | 26 to 14 | 0.4 | 15 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Wire Range (AWG) | Torque (N�m) | Current (A max) | Spacing (mm) |
952 | 300 | B | 26 to 14 | 0.4 | 15 | 10 |
952-A-SMD | 300 | B | 26 to 14 | 0.4 | 15 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Use Group | Current (A max) | Torque (N�m) |
952-FL-DS | 300 | 10 | 26 to 14 | B,D,E | 10 | 0.4 |
960-FB | 300 | 5.08 | N/A | B | 20 | N/A |
960-SV | 300 | 5.08 | 26 to 12 | B | 20 | 0.51 |
961-SV | 300 | 5.08 | 26 to 12 | B | 20 | 0.51 |
970-FBW | 300 | 5 | 26 to 12 | B | 20 | 0.4 |
970-HEN | 300 | 5 | 26 to 12 | B | 20 | 0.51 |
970-KA | 300 | 5 | N/A | B | 20 | N/A |
970-LH | 300 | 5 | 26 to 12 | B | 20 | 0.51 |
970-NFBW | 300 | 5 | 26 to 12 | B | 20 | 0.4 |
970-SV | 300 | 5 | 26 to 12 | B | 20 | 0.51 |
971-FB | 300 | 5 | N/A | B | 20 | N/A |
971-FBS | 300 | 5 | 26 to 12 | B | 20 | 0.4 |
971-HG | 300 | 5 | 26 to 12 | D,E | 10 | 0.51 |
971-KRFBS | 300 | 5 | 26 to 12 | B | 20 | 0.4 |
971-RFBS | 300 | 5 | 26 to 12 | B | 20 | 0.4 |
973-HG | 300 | 10 | 26 to 12 | D,E | 10 | 0.51 |
973-KRFBS | 300 | 10 | 26 to 12 | B | 20 | 0.4 |
973-LH | 300 | 10 | 26 to 12 | B | 20 | 0.51 |
973-SV | 300 | 10 | 26 to 12 | B | 20 | 0.51 |
974-D-SMD-DS | 300 | 5 | 18 to 12 | D | 10 | 0.4 |
974-D-SMD-DS | 300 | 5 | 18 to 12 | B | 20 | 0.4 |
974-DS | 300 | 5 | 26 to 12 | B | 20 | 0.51 |
974-T | 300 | 5 | 26 to 12 | B | 20 | 0.51 |
975-FB | 300 | 10 | N/A | B | 20 | N/A |
975-T | 300 | 10 | 26 to 12 | B | 20 | 0.51 |
976-FB | 300 | 7.5 | N/A | B | 20 | N/A |
976-T | 300 | 7.5 | 26 to 12 | B | 20 | 0.51 |
982-F-2.8 | 300 | 9.52 | N/A | B,D,E | 6 | N/A |
982-MF-2.8 | 300 | 9.52 | 20 to 12 | B,D,E | 6 | 0.79 |
983-F-2.8 | 300 | 10 | N/A | B,D,E | 6 | N/A |
983-MF-2.8 | 300 | 10 | 20 to 12 | B,D,E | 6 | 1.13 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Use Group | Current (A max) | Torque |
952-PFB | 300 | 10 | N/A | B | 7 | N/A |
952-PFB-DS | 300 | 10 | N/A | B | 7 | N/A |
953-PFB | 300 | 10 | N/A | B | 7 | N/A |
953-PFB-DS | 300 | 10 | N/A | B | 7 | N/A |
970-FB | 300 | 5 | N/A | B | 20 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Use Group | Wire Range (AWG) | Current (A max) | Torque (N�m) |
953-HG | 300 | 10 | B | 26 to 14 | 15 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Use Group | Spacing (mm) | Current (A max) |
958 | 300 | 26 to 14 | 0.4 | B | 5 | 15 |
958-DS | 300 | 26 to 14 | 0.4 | B | 5 | 15 |
958-FL-DS | 300 | 26 to 14 | 0.4 | B | 5 | 10 |
958-GFL-DS | 300 | 26 to 14 | 0.4 | B | 5 | 10 |
958-LH | 300 | 26 to 14 | 0.4 | B | 5 | 15 |
958-LH-DS | 300 | 26 to 14 | 0.4 | B | 5 | 15 |
958-T | 300 | 26 to 14 | 0.4 | B | 5.00 | 15 |
958-T-DS | 300 | 26 to 14 | 0.4 | B | 5.00 | 15 |
958-T-FLDS | 300 | 26 to 14 | 0.4 | B | 5.00 | 10 |
992-DS | 300 | 22 to 14 | 0.51 | D,E | 10 | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Use Group | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) |
960 | 300 | B | 26 to 12 | 20 | 0.51 | 5.08 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Spacing (mm) | Use Group | Current (A max) | Torque (N�m) |
960 | 300 | 26 to 12 | 5.08 | D,E | 10 | 0.51 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Torque (N�m) | Wire Range (AWG) | Use Group | Current (A max) |
960-B-2.8 | 300 | 5.08 | 0.51 | 22 to 10 | B,D,E | 6 |
960-B-2.8-DS | 300 | 5.08 | 0.51 | 22 to 10 | B,D,E | 6 |
960-DS | 300 | 5.08 | 0.51 | 26 to 12 | B | 20 |
960-DS | 300 | 5.08 | 0.51 | 26 to 12 | D,E | 10 |
977-T-DS | 300 | 7.5 | 0.51 | 22 to 10 | B | 20 |
977-T-DS | 300 | 7.5 | 0.51 | 26 to 12 | D,E | 10 |
977-THM | 300 | 7.5 | 0.51 | 26 to 12 | B | 20 |
977-THM | 300 | 7.5 | 0.51 | 26 to 12 | D,E | 10 |
977-THM-DS | 300 | 7.5 | 0.51 | 26 to 12 | B | 20 |
977-THM-DS | 300 | 7.5 | 0.51 | 26 to 12 | D,E | 10 |
982-FD-2.8 | 300 | 9.52 | N/A | 20 to 12 | B,D,E | 6 |
982-FD-4.8 | 300 | 9.52 | N/A | 20 to 12 | B | 15 |
982-FD-4.8 | 300 | 9.52 | N/A | 20 to 12 | D,E | 10 |
982-FS-2.8 | 300 | 9.52 | N/A | 20 to 12 | B,D,E | 6 |
982-FS-4.8 | 300 | 9.52 | N/A | 20 to 12 | B | 15 |
982-FS-4.8 | 300 | 9.52 | N/A | 20 to 12 | D,E | 10 |
982-FSMF-2.8 | 300 | 9.52 | N/A | 20 to 12 | B,D,E | 6 |
982-FSMF-4.8 | 300 | 9.52 | N/A | 20 to 12 | B | 15 |
982-FSMF-4.8 | 300 | 9.52 | N/A | 20 to 12 | D,E | 10 |
982-FSML-2.8 | 300 | 9.52 | N/A | 20 to 12 | B,D,E | 6 |
982-FSML-4.8 | 300 | 9.52 | N/A | 20 to 12 | B | 15 |
982-FSML-4.8 | 300 | 9.52 | N/A | 20 to 12 | D,E | 10 |
983-FD-2.8 | 300 | 10 | N/A | 20 to 12 | B,D,E | 6 |
983-FD-4.8 | 300 | 10 | N/A | 20 to 12 | B | 15 |
983-FD-4.8 | 300 | 10 | N/A | 20 to 12 | D,E | 10 |
983-FS-2.8 | 300 | 10 | N/A | 20 to 12 | B,D,E | 6 |
983-FS-4.8 | 300 | 10 | N/A | 20 to 12 | B | 15 |
983-FSMF-2.8 | 300 | 10 | N/A | 20 to 12 | B,D,E | 6 |
983-FSMF-4.8 | 300 | 10 | N/A | 20 to 12 | B | 15 |
983-FSML-2.8 | 300 | 10 | N/A | 20 to 12 | B,D,E | 6 |
983-FSML-4.8 | 300 | 10 | N/A | 20 to 12 | B | 15 |
983-FSML-4.8 | 300 | 10 | N/A | 20 to 12 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Current (A max) | Use Group |
960-TY | 300 | 5.08 | 26 to 12 | 0.51 | 10 | D,E |
973-T-DS | 300 | 10 | 26 to 12 | 0.51 | 10 | D,E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Use Group | Current (A max) | Wire Range | Torque |
961-FB | 300 | 5.08 | B | 20 | N/A | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range | Torque | Use Group | Current (A max) |
961-FB | 300 | 5.08 | N/A | N/A | D,E | 10 |
962-FB | 300 | 10.16 | N/A | N/A | D,E | 10 |
963-FB | 300 | 10.16 | N/A | N/A | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Current (A max) | Use Group | Spacing (mm) |
969-DS | 300 | 26 to 12 | 0.51 | 20 | B | 10.16 |
972-DS | 300 | 26 to 12 | 0.51 | 20 | B | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Wire Range (AWG) | Torque | Use Group | Current (A max) |
970-FB | 300 | 5 | N/A | N/A | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Current (A max) | Wire Range (AWG) | Use Group | Torque (N�m) |
971-KS | 300 | 5 | 10 | N/A | B | N/A |
971-SLK | 300 | 5 | 10 | N/A | B | N/A |
971-SLK-CPL | 300 | 5 | 10 | N/A | B | N/A |
971-SLK-SMD | 300 | 5 | 10 | N/A | B | N/A |
971-SLK-THR | 300 | 5 | 10 | N/A | B | N/A |
971-SLR | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-SMD | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-THR | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-1.0 | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-1.1 | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-1.3 | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-THR-1.1 | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-THR-1.3 | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-SMD-1.1 | 300 | 5 | 10 | N/A | B | N/A |
971-SLR-SMD-1.3 | 300 | 5 | 10 | N/A | B | N/A |
971-SLS | 300 | 5 | 10 | N/A | B | N/A |
971-SLT-SMD | 300 | 5 | 10 | N/A | B | N/A |
971-SLW | 300 | 5 | 10 | N/A | B | N/A |
971-SV | 300 | 5 | 10 | 26 to 12 | D,E | 0.51 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Current (A max) | Wire Range (AWG) | Torque (N�m) | Use Group |
971-KS | 300 | 5 | 10 | N/A | N/A | D,E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Voltage (V max) | Use Group | Current (A max) |
972-EN | 26 to 12 | 0.51 | 10 | 150 | C | 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Current (A max) | Voltage (V max) | Use Group |
972-EN-DS | 26 to 12 | 0.51 | 10 | 20 | 300 | B |
972-EN-DS | 26 to 12 | 0.51 | 10 | 20 | 150 | C |
972-ENO | 26 to 12 | 0.51 | 10 | 20 | 300 | B |
972-ENO | 26 to 12 | 0.51 | 10 | 20 | 150 | C |
972-ENO-DS | 26 to 12 | 0.51 | 10 | 20 | 300 | B |
972-ENO-DS | 26 to 12 | 0.51 | 10 | 20 | 150 | C |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Wire Range (AWG) | Voltage (V max) | Use Group | Current (A max) | Torque (N�m) |
972-FB | 10 | N/A | 300 | D,E | 10 | N/A |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Wire Range (AWG) | Voltage (V max) | Torque (N�m) | Use Group | Current (A max) |
972-FB | 10 | N/A | 300 | N/A | B | 20 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Voltage (V max) | Use Group | Current (A max) | Wire Range (AWG) | Torque (N�m) |
972-FBW | 10 | 300 | B | 20 | 26 to 12 | 0.4 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Use Group | Current (A max) |
972-FBW | 10 | 300 | 26 to 12 | 0.4 | D,E | 10 |
972-FBW-DS | 10 | 300 | 26 to 12 | 0.4 | B | 20 |
972-FBW-DS | 10 | 300 | 26 to 12 | 0.4 | D,E | 10 |
972-KA | 10 | 300 | N/A | N/A | B | 20 |
972-KB | 10 | 300 | N/A | N/A | B | 20 |
972-KB | 10 | 300 | N/A | N/A | D,E | 10 |
972-KE | 10 | 300 | N/A | N/A | B | 20 |
972-KE | 10 | 300 | N/A | N/A | D,E | 10 |
972-LH | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-LH-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-LH-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-MP | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-MP | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-MP-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-MP-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-NFBW | 10 | 300 | 26 to 12 | 0.4 | D,E | 10 |
972-NFBW-DS | 10 | 300 | 26 to 12 | 0.4 | B | 20 |
972-NFBW-DS | 10 | 300 | 26 to 12 | 0.4 | D,E | 10 |
972-SV | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-SV-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-SV-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-T | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-T-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-THR | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-THR | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-THR-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-THR-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-TMP | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-TMP | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-TMP-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-TMP-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-TX | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-TX | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-TX-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-TX-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-TY | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-TY | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-TY-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-TY-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-X | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-X | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-X-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-X-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-Y | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-Y | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
972-Y-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
972-Y-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
973 | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
973 | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
973-DS | 10 | 300 | 26 to 12 | 0.51 | B | 20 |
973-DS | 10 | 300 | 26 to 12 | 0.51 | D,E | 10 |
973-FB | 10 | 300 | N/A | N/A | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Voltage (V max) | Wire Range (AWG) | Torque (N�m) | Current (A max) | Use Group |
972-T | 10 | 300 | 26 to 12 | 0.51 | 20 | D,E |
972-T-DS | 10 | 300 | 26 to 12 | 0.51 | 20 | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Use Group | Torque (N�m) | Current (A max) | Spacing (mm) |
973-FBS | 300 | 26 to 12 | D,E | 0.4 | 10 | 5 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Current (A max) | Wire Range (AWG) | Use Group | Torque (N�m) | Spacing (mm) |
973-KS | 300 | 10 | N/A | B | N/A | 10 |
973-SLK | 300 | 10 | N/A | B,D,E | N/A | 10 |
973-SLS | 300 | 10 | N/A | B,D,E | N/A | 10 |
973-SLW | 300 | 10 | N/A | B,D,E | N/A | 10 |
A396-T | 300 | 10 | 26 to 16 | B | 0.2 | 3.96 |
A396-T-DS | 300 | 10 | 26 to 16 | B | 0.2 | 3.96 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Current (A max) | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Use Group |
973-KS | 300 | 10 | N/A | N/A | 10 | D,E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Current (A max) | Use Group | Voltage (V max) |
979-EN | 0.51 | 26 to 12 | 10 | 20 | C | 150 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Current (A max) | Voltage (V max) | Use Group |
979-EN-DS | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-EN-DS | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-ENO | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-ENO | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-ENO-DS | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-ENO-DS | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-HEN | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-HEN | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-HEN-DS | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-HEN-DS | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-HENO | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-HENO | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-HENO-DS | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
979-HENO-DS | 0.51 | 26 to 12 | 10 | 20 | 150 | C |
979-MP | 0.51 | 26 to 12 | 10 | 20 | 300 | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Voltage (V max) | Use Group | Current (A max) |
979-MP | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-MP-DS | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-MP-DS | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-T | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-T | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-T-DS | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-T-DS | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-THR | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-THR | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-THR-DS | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-THR-DS | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-TMP | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-TMP | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-TMP-DS | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-TMP-DS | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-TY | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-TY | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-TY-DS | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-TY-DS | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-Y | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-Y | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
979-Y-DS | 0.51 | 26 to 12 | 10 | 300 | B | 20 |
979-Y-DS | 0.51 | 26 to 12 | 10 | 300 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Torque (N�m) | Voltage (V max) | Wire Range (AWG) | Use Group | Current (A max) | Spacing (mm) |
980-D | 0.51 | 300 | 22 to 18 | B,D,E | 7 | 6.35 |
980-S | 0.51 | 300 | 22 to 18 | B,D,E | 7 | 6.35 |
980-W | 0.51 | 300 | 22 to 18 | B,D,E | 7 | 6.35 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Spacing (mm) | Torque (N�m) | Wire Range (AWG) | Current (A max) | Use Group |
983-FS-4.8 | 300 | 10 | N/A | 20 to 12 | 10 | D,E |
983-FSMF-4.8 | 300 | 10 | N/A | 20 to 12 | 10 | D,E |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Voltage (V max) | Use Group | Current (A max) |
983-UD | 10 | 20 to 12 | 1.13 | 600 | B,C | 20 |
983-US | 10 | 20 to 12 | 1.13 | 600 | B,C | 20 |
983-UW | 10 | 20 to 12 | 1.13 | 600 | B,C | 20 |
983-W | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZD | 10 | 20 to 12 | 1.13 | 300 | B | 20 |
983-ZD | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZMF | 10 | 20 to 12 | 1.13 | 300 | B | 15 |
983-ZMF-4.8 | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZML | 10 | 20 to 12 | 1.13 | 300 | B | 20 |
983-ZML | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZS | 10 | 20 to 12 | 1.13 | 300 | B | 20 |
983-ZS | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZSC | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZSMF | 10 | 20 to 12 | 1.13 | 300 | B | 15 |
983-ZSMF-4.8 | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
983-ZSML | 10 | 20 to 12 | 1.13 | 300 | B | 20 |
983-ZW | 10 | 20 to 12 | 1.13 | 300 | B | 20 |
983-ZW | 10 | 20 to 12 | 1.13 | 300 | D,E | 10 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Current (A max) | Use Group | Voltage (V max) |
983-W | 10 | 20 to 12 | 1.13 | 20 | B | 300 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Voltage (V max) | Current (A max) | Use Group |
983-ZSC | 10 | 20 to 12 | 1.13 | 300 | 20 | B |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Models | Voltage (V max) | Wire Range (AWG) | Use Group | Torque (N�m) | Spacing (mm) | Current (A max) |
990-DS | 300 | 22 to 14 | B | 0.51 | 5 | 15 |
General Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
- All types 983 followed by S, ZS, SC, ZSC, D, ZD, W, ZW, F, FS, FD, MF, ZMF, ML., ZML, FSMF, FSML, SMF, ZSMF, SML and ZSML may be followed by suffix DAM. This denotes end wall with increased thickness
Terminal blocks for mounting on PCB, for solid or stranded copper conductors
115
Models | Pole(s) | Max Volt | Wire Range (AWG) | Torque (N�m) | Current (A max) | Spacing Group | Spacing (mm) |
Type 115-F-111, Type 115-F-211, Type 115-F-118, Type 115-F-MDR | 2 to 12 | 300 V | 26-14 | 0.22 | 12 | B | 5.0 |
115
Models | Pole(s) | Max Volt | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
Type 115-F-111, Type 115-F-211, Type 115-F-118, Type 115-F-MDR | 2 to 12 | 300 V | 26-14 | 0.22 | 5.0 | D, E | 10 |
PART 1
Terminal Blocks for PCB and panel or chassis mounting.
Models |
Series 302 |
PCB mounted terminal blocks | 300V / B, D, E | 15 A, 26-14 AWG, 0.4 Nm |
De-pluggable PCB mounted terminal blocks | 300V / B, D, E | 6 A, 26-12 AWG, 0.4 Nm |
Panel chassis mounted terminal block | 300V / B, D, E | 20 A, 26-12 AWG, 0.4 Nm |
De-pluggable panel chassis mounted terminal blocks | 300V / B, D, E | 10 A, 26-14 AWG, 0.4 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Series 321 |
De-pluggable panel chassis mounted terminal blocks | 300V / B, D, E | 15 A, 26-12 AWG, 0.51 Nm |
Panel chassis mounted terminal blocks | 300V / B, D, E | 20 A, 26-12 AWG, 0.51 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Series 322 |
PCB mounted terminal blocks | 300V / B, D, E | 20 A, 26-14 AWG, 0.51 Nm |
De-pluggable panel chassis mounted terminal blocks | 300V / B, D, E | 15 A, 26-12 AWG, 0.51 Nm |
Panel chassis mounted terminal blocks | 300V / B, D, E | 20 A, 26-12 AWG, 0.51 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Series 323 |
De-pluggable panel chassis mounted terminal blocks | 300V / B, D, E | 15 A, 26-12 AWG, 0.51 Nm |
Panel chassis mounted terminal blocks | 300V / B, D, E | 25 A, 26-12 AWG, 0.51 Nm |
Type 323-FU-18.5 | ||
Panel chassis mounted terminal blocks | 300V / B, C, D, E | 25 A, 26-12 AWG, 0.51 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Series 324 |
De-pluggable panel chassis mounted terminal blocks | 300V / B, C | 20 A, 26-10 AWG, 0.8 Nm |
Panel chassis mounted terminal blocks | 300V / B, C | 40 A, 26-10 AWG, 0.8 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Series 326 |
Panel chassis mounted terminal blocks | 300V / B, D, E | 55 A, 14-8 AWG, 1.2 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Series 327 |
Panel chassis mounted terminal blocks | 300V / B, D, E | 80 A, 14-6 AWG, 1.8 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models |
Type 327-FU |
Panel chassis mounted terminal blocks | 600V / B, C | 80 A, 14-6 AWG, 1.8 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
Type 302, 302-N | 26-12 | 300 V | B | 20 | 0.4 | 8 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Wire Range (AWG) | Max. Voltage | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
Type 302, 302-N | 26-12 | 300 V | 0.4 | 8 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) | Wire Range (AWG) |
Type 302-HDS, Type 302-N-HDS, Type 302-HDS/..-V0-BUK | 300 V | 0.4 | 8 | B | 20 | 26-14 (2X18) |
Type 302-FB, Type 302-FBG, Type 302-NFB | 300 V | 0.4 | 8 | B, D, E | 6 | 26-12 |
Type 302-FB-DS, Type 302-FBG-DS, Type 302-NFB-DS | 300 V | 0.4 | 8 | B, D, E | 6 | 26-14 |
Type 302-STB-DS, Type 302-NSTB-DS, Type 302-NFLP-DS | 300 V | 0.4 | 8 | B, D, E | 10 | 26-14 |
Type 302-FLW-DS, Type 302-NFLW-DS | 300 V | 0.4 | 8 | B, D, E | 10 | 26-14 |
Type 302-SV, Type 302-SVG, Type 302-N-SV, Type 302-STS, Type 302-NSTS, Type 302-NSLP, Type 302-NSLW | 300 V | 0.4 | 8 | B, D, E | 10 | 26-12 |
Type 302-SV-DS, Type 302-SVG-DS, Type 302-N-SV-DS, Type 302-STS-DS, Type 302-NSTS-DS, Type 302-NSLP-HDS, Type 302-NSLW-HDS | 300 V | 0.4 | 8 | B, D, E | 10 | 26-14 |
Type 323, Type 323-V, Type 323-HDS, Type 323-V-HD | 300 V | 0.51 | 10 | B | 25 | 26-10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Spacing Group | Current (A max) |
Type 302-HDS, Type 302-N-HDS | 300 V | 0.4 | 8 | 26-14 | D, E | 10 |
Type 302-G, Type 302-G-DS | 300 V | 0.4 | 8 | 26-14 | B | 15 |
Type 302-G, Type 302-G-DS | 300 V | 0.4 | 8 | 26-14 | D, E | 10 |
Type 321-LFS-DS | 300 V | 0.51 | 10 | 26-12 | B | 20 |
Type 321-LFS-DS | 300 V | 0.51 | 10 | 26-12 | D, E | 10 |
321-B | 300 V | 0.51 | 10 | 26-10 | B | 15 |
321-B | 300 V | 0.51 | 10 | 26-10 | D, E | 10 |
321-B-DS | 300 V | 0.51 | 10 | 26-12 | B | 15 |
321-B-DS | 300 V | 0.51 | 10 | 26-12 | D, E | 10 |
321-S | 300 V | 0.51 | 10 | 26-10 | B | 15 |
321-S | 300 V | 0.51 | 10 | 26-10 | D, E | 10 |
321-S-DS | 300 V | 0.51 | 10 | 26-12 | B | 15 |
321-S-DS | 300 V | 0.51 | 10 | 26-12 | D, E | 10 |
322-LFS | 300 V | 0.51 | 10 | 22-10 | B | 20 |
322-LFS | 300 V | 0.51 | 10 | 22-10 | D, E | 10 |
322-LFS-DS | 300 V | 0.51 | 10 | 26-12 | B | 20 |
322-LFS-DS | 300 V | 0.51 | 10 | 26-12 | D, E | 10 |
Type 322-G, Type 322-YG | 300 V | 0.51 | 10 | 22-10 | B | 20 |
Type 322-G, Type 322-YG | 300 V | 0.51 | 10 | 22-10 | D, E | 10 |
Type 322-G-DS, Type 322-YG-DS | 300 V | 0.51 | 10 | 26-12 | B | 20 |
Type 322-G-DS, Type 322-YG-DS | 300 V | 0.51 | 10 | 26-12 | D, E | 10 |
Type 322-A-2.8, Type 322-A-2.8-DS | 300 V | 0.51 | 10 | 22-10 | B, D, E | 6 |
322-FBG | 300 V | 0.51 | 10 | 26-10 | B | 15 |
322-FBG | 300 V | 0.51 | 10 | 26-10 | D, E | 10 |
Type 322-SV, Type 322-SVW, Type� 322-SVG, Type 322-STFS | 300 V | 0.51 | 10 | 26-10 | B | 15 |
Type 322-SV, Type 322-SVW, Type 322-SVG, Type 322-STFS | 300 V | 0.51 | 10 | 26-10 | D, E | 10 |
Type 322-SV-DS, Type 322-SVW-DS, Type 322-SVG-DS, Type 322-STFS-DS | 300 V | 0.51 | 10 | 26-12 | B | 15 |
Type 322-SV-DS, Type 322-SVW-DS, Type 322-SVG-DS, Type 322-STFS-DS | 300 V | 0.51 | 10 | 26-12 | D, E | 10 |
Type 323, Type 323-HDS, Type 323-V-HDS, Type 323-V | 300 V | 0.51 | 10 | 26-10 | D, E | 10 |
Type 323-N, Type 323-N-HDS, Type 323-FN, Type 323-FN-V, Type 323-FN-HDS, Type 323-FN-V-HDS, Type 323-FU-16.5, Type 323-FU-16.5-V, Type 323-FU-16.5-HDS, Type 323-FU-16.5-V-HDS | 300 V | 0.51 | 10 | 26-10 | D, E | 10 |
Type 323-FU-18.5, Type 323-FU-18.5-V, Type 323-FU-18.5-HDS, Type 323-FU-18.5-V-HDS | 300 V | 0.51 | 10 | 26-10 | B, C, D, E | 25 |
324-HDS | 300 V | 0.8 | 11.5 | 26-10 | B | 40 |
324-HDS | 300 V | 0.8 | 11.5 | 26-10 | D, E | 10 |
324-FU | 300 V | 0.8 | 11.5 | 22-10 | B, C | 40 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Current (A max) | Spacing Group |
Type 302-LF-DS, Type 302-NLF-DS | 300 V | 0.4 | 8 | 26-14 | 10 | B, D, E |
Type 323-N, Type 323-N-HDS, Type 323-FN, Type 323-FN-V, Type 323-FN-HDS, Type 323-FN-V-HDS, Type 323-FU-16.5, Type 323-FU-16.5-V, Type 323-FU-16.5-HDS, Type 323-FU-16.5-V-HDS | 300 V | 0.51 | 10 | 26-10 | 25 | B |
150 V | C |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Torque (N�m) | Spacing (mm) | Spacing Group | Wire Range (AWG) | Current (A max) |
Type 302-STB, Type 302-NSTB, Type 302-NFLP | 300 V | 0.4 | 8 | B, D, E | 26-12 | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
Type 321-LFS | 300 V | 22-10 | B | 20 | 0.51 | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
Type 321-LFS | 300 V | 22-10 | 0.51 | 10 | D, E | 10 |
324 | 300 V | 22-10 | 0.8 | 11.5 | D, E | 10 |
326, 326-HDS | 300 | 14-8 | 1.2 | 14.5 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) |
Type 323-FU-18.5, Type 323-FU-18.5-V, Type 323-FU-18.5-HDS, Type 323-FU-18.5-V-HDS | 0.51 | 10 | 26-10 | 600 V | D, E | 5 |
Type 323-FB, Type 323-FBW, Type 323-FBWGE, Type 323-STFB | 0.51 | 10 | 26-10 | 300 V | B | 15 |
Type 323-FB, Type 323-FBW, Type 323-FBWGE, Type 323-STFB | 0.51 | 10 | 26-10 | 300 V | D, E | 10 |
Type 323-PHFBW | 0.51 | 10 | 26-10 | 600 V | D, E | 5 |
Type 323-PHFBW-DS | 0.51 | 10 | 26-12 | 300 V | B | 20 |
324-FU | 0.8 | 11.5 | 22-10 | 600 V | D, E | 5 |
Type 324-FU-HDS | 0.8 | 11.5 | 26-10 | 300 V | B, C | 40 |
324-FU-HDS | 0.8 | 11.5 | 26-10 | 600 V | D, E | 5 |
324-STFB, 324-STFB-DS | 0.8 | 11.5 | 26-10 | 300 | B | 20 |
324-STFB, 324-STFB-DS | 0.8 | 11.5 | 26-10 | 300 | D, E | 10 |
324-STFS, 324-STFS-DS | 0.8 | 11.5 | 26-10 | 300 | B | 20 |
324-STFS, 324-STFS-DS | 0.8 | 11.5 | 26-10 | 300 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Torque (N�m) | Spacing (mm) | Max. Voltage | Wire Range (AWG) | Spacing Group | Current (A max) |
Type 323-FB-HDS, Type 323-FBW-DS, Type 323-FBWGE-DS, Type 323-STFB-DS | 0.51 | 10 | 300 V | 26-12 | B | 15 |
Type 323-FB-HDS, Type 323-FBW-DS, Type 323-FBWGE-DS, Type 323-STFB-DS | 0.51 | 10 | 300 V | 26-12 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Torque (N�m) | Spacing (mm) | Max. Voltage | Wire Range (AWG) | Current (A max) | Spacing Group |
Type 323-PHFBW | 0.51 | 10 | 300 V | 26-10 | 20 | B |
150 V | C |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Max Volt |
Type 323-PHFBW-DS | 0.51 | 10 | 26-12 | 300 V | B | 20 | |
C | 150 V |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Spacing Group | Wire Range (AWG) | Current (A max) | Torque (N�m) | Spacing (mm) |
324 | 300 V | B | 22-10 | 40 | 0.8 | 11.5 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) | Max Volt |
326, 326-HDS | 300 | 14-8 | B | 55 | 1.2 | 14.5 | |
C | 150 V |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Spacing (mm) | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) | Max Volt |
327, 327-HDS | 300 | 14.5 | 14-6 | B | 80 | 1.8 | |
C | 150 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Max. Voltage | Spacing (mm) | Wire Range (AWG) | Spacing Group | Torque (N�m) | Current (A max) |
327, 327-HDS | 300 | 14.5 | 14-6 (2 X 12) | D, E | 1.8 | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 1
Models | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Max. Voltage | Spacing Group | Current (A max) |
327-FU, 327-FU-HDS | 14.5 | 14-6 (2 X 12) | 1.8 | 600 | B, C, D, E | 80 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Terminal Blocks
Models |
Series 374 |
De-pluggable PCB mounted terminal blocks | 50V / B | 20 A, 26-10 AWG, 0.8 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models |
Series 377 |
De-pluggable PCB mounted terminal blocks | 300V / B, D, E | 55 A, 14-6 AWG, 2.0 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models |
Series 378 |
De-pluggable panel chassis mounted terminal blocks | 300V / B, D, E | 65 A, 14-4 AWG, 2.0 Nm |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Spacing | Torque (N�m) |
374-STFB, 374-STFB-DS | 26-10 | 50 V | B | 20 | 6.7 | 0.8 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Spacing Group | Wire Range (AWG) | Max. Voltage | Current (A max) | Torque (N�m) | Spacing (mm) |
377-STFB, 377-STFB-DS | B | 14-6 | 300 | 55 | 2 | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Wire Range (AWG) | Max. Voltage | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
377-STFB, 377-STFB-DS | 14-6 | 300 | 2 | 10 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Max. Voltage | Torque (N�m) | Spacing (mm) | Wire Range (AWG) | Spacing Group | Current (A max) |
378-STFB | 300 | 2 | 10 | 14-4 | B | 65 |
378-STFB | 300 | 2 | 10 | 14-4 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
374-STG | N/A | 50 | B | 20 | N/A | 6.7 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Wire Range (AWG) | Spacing Group | Torque (N�m) | Max. Voltage | Current (A max) | Spacing (mm) |
377-STG | N/A | B | N/A | 300 V | 65 | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART 2
Models | Wire Range (AWG) | Torque (N�m) | Max. Voltage | Spacing (mm) | Spacing Group | Current (A max) |
377-STG | N/A | N/A | 300 V | 10 | D, E | 10 |
Note:
1. Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load or any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
2. Type 324-HDS, 326-HDS, 327-HDS and 327-FU-HDS may additionally be followed by suffix WS or WSM
3. Series 302, 321, 322, 323, 324, 326 and 327 may additionally be followed by suffix BS
PART-A
Terminal Blocks for mounting on a printed circuit board, for stranded or solid insulated copper conductors, 600 V or less, 130 ºC
12
Models | Max. Voltage | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
120-A-111, 120-A-121, 120-A-311, 120-A-411, 120-A-511, 120-A-115, 120-C-111, 120-D-111, 120-D-121, 120-D-115, 120-D-125, 120-W-111, 120-W-171 | 300 V | 12 to 26 | B | 15 | 0.51 | 5 |
120-A-111 with suffix Z, 120-A-115 with suffix Z, 120-D-111 with suffix Z, 120-D-115 with suffix Z, 120-D-121 with suffix Z, 120-D-125 with suffix Z | 300 V | 12 to 26 | B | 15 | 0.51 | 5 |
120-M-111, 120-M-211, 120-M-121, 120-M-221, 120-M-311, 120-M-411, 120-M-711, 120-M-811, 120-M-181, 120-M-281, 120-M-581, 120-M-681, 120-M-191, 120-M-291, 120-M-591, 120-M-691, 120-M-161, 120-M-261, 120-M-163, 120-M-263, 120-M-151, 120-M-251, 120-M-153, 120-M-253, 120-M-215, 120-M-225, 120-M-217, 120-M-227, 120-M-285, 120-M-255, 120-M-295, 120-M-265, 120-M-511, 120-M-521, 120-M-611, 120-M-621 | 300 V | N/A | B | 15 | N/A | 5 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
120-A-111, 120-A-121, 120-A-311, 120-A-411, 120-A-511, 120-A-115, 120-C-111, 120-D-111, 120-D-121, 120-D-115, 120-D-125, 120-W-111, 120-W-171, 120-A-111 with suffix Z, 120-A-115 with suffix Z, 120-D-111 with suffix Z, 120-D-115 with suffix Z, 120-D-121 with suffix Z, 120-D-125 with suffix Z | 300 V | 12 to 26 | 0.51 | 5 | D, E | 10 |
121-A-111, 121-A-121, 121-A-311, 121-A-411, 121-A-511, 121-A-115, 121-C-111, 121-D-111, 121-D-121, 121-D-115, 121-D-125, 121-A-111 with suffix Z, 121-A-115 with suffix Z, 121-D-111 with suffix Z, 121-D-115 with suffix Z, 121-D-121 with suffix Z, 121-D-125 with suffix Z | 300 V | 12 to 26 | 0.51 | 5.08 | D, E | 10 |
122-A-111, 122-D-111, 122-D-121 | 300 V | 12 to 26 | 0.51 | 7.5 | D, E | 10 |
120-M-111, 120-M-211, 120-M-121, 120-M-221, 120-M-311, 120-M-411, 120-M-711, 120-M-811, 120-M-181, 120-M-281, 120-M-581, 120-M-681, 120-M-191, 120-M-291, 120-M-591, 120-M-691, 120-M-161, 120-M-261, 120-M-163, 120-M-263, 120-M-151, 120-M-251, 120-M-153, 120-M-253, 120-M-215, 120-M-225, 120-M-217, 120-M-227, 120-M-285, 120-M-255, 120-M-295, 120-M-265, 120-M-511, 120-M-521, 120-M-611, 120-M-621 | 300 V | N/A | N/A | 5 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Wire Range (AWG) | Torque (N�m) | Current (A max) | Spacing Group | Spacing (mm) |
121-A-111, 121-A-121, 121-A-311, 121-A-411, 121-A-511, 121-A-115, 121-C-111, 121-D-111, 121-D-121, 121-D-115, 121-D-125, 121-A-111 with suffix Z, 121-A-115 with suffix Z, 121-D-111 with suffix Z, 121-D-115 with suffix Z, 121-D-121 with suffix Z, 121-D-125 with suffix Z | 300 V | 12 to 26 | 0.51 | 15 | B | 5.08 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Wire Range (AWG) | Torque (N�m) | Spacing Group | Current (A max) | Spacing (mm) |
122-A-111, 122-D-111, 122-D-121 | 300 V | 12 to 26 | 0.51 | B | 15 | 7.5 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Spacing (mm) | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) |
120-W-111-RW-FED, 120-W-171-RW-FED | 300 V | 5 | 12 to 26 | B | 12 | 0.51 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Spacing Group | Current (A max) |
120-W-111-RW-FED, 120-W-171-RW-FED | 300 V | 5 | 12 to 26 | 0.51 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
121-M-111, 121-M-211, 121-M-121, 121-M-221, 121-M-311, 121-M-411, 121-M-711, 121-M-811, 121-M-181, 121-M-281, 121-M-581, 121-M-681, 121-M-191, 121-M-291, 121-M-591, 121-M-691, 121-M-161, 121-M-261, 121-M-163, 121-M-263, 121-M-151, 121-M-251, 121-M-153, 121-M-253, 121-M-215, 121-M-225, 121-M-217, 121-M-227, 121-M-285, 121-M-255, 121-M-295, 121-M-265, 121-M-511, 121-M-521, 121-M-611, 121-M-621 | 300 V | N/A | B | 15 | N/A | 5.08 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
121-M-111, 121-M-211, 121-M-121, 121-M-221, 121-M-311, 121-M-411, 121-M-711, 121-M-811, 121-M-181, 121-M-281, 121-M-581, 121-M-681, 121-M-191, 121-M-291, 121-M-591, 121-M-691, 121-M-161, 121-M-261, 121-M-163, 121-M-263, 121-M-151, 121-M-251, 121-M-153, 121-M-253, 121-M-215, 121-M-225, 121-M-217, 121-M-227, 121-M-285, 121-M-255, 121-M-295, 121-M-265, 121-M-511, 121-M-521, 121-M-611, 121-M-621 | 300 V | N/A | N/A | 5.08 | D, E | 10 |
122-M-111, 122-M-211, 122-M-121, 122-M-221 | 300 V | N/A | N/A | 7.5 | D, E | 10 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Wire Range (AWG) | Torque (N�m) | Spacing Group | Current (A max) | Spacing (mm) |
122-M-111, 122-M-211, 122-M-121, 122-M-221 | 300 V | N/A | N/A | B | 15 | 7.5 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Max. Voltage | Spacing Group | Current (A max) | Torque (N�m) | Wire Range (AWG) | Spacing (mm) |
120-A-112, 120-A-122, 120-A-312, 120-A-412, 120-A-512, 120-A-116, 120-C-112, 120-D-112, 120-D-122, 120-D-116, 120-D-126, 120-W-112, 120-W-172, 120-A-112 with suffix Z, 120-A-116 with suffix Z, 120-D-112 with suffix Z, 120-D-116 with suffix Z, 120-D-122 with suffix Z, 120-D-126 with suffix Z | 300 V | B | 15 | 0.51 | 12 to 26 | 10 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Max. Voltage | Spacing Group | Current (A max) |
120-A-112, 120-A-122, 120-A-312, 120-A-412, 120-A-512, 120-A-116, 120-C-112, 120-D-112, 120-D-122, 120-D-116, 120-D-126, 120-W-112, 120-W-172, 120-A-112 with suffix Z, 120-A-116 with suffix Z, 120-D-112 with suffix Z, 120-D-116 with suffix Z, 120-D-122 with suffix Z, 120-D-126 with suffix Z | 0.51 | 12 to 26 | 10 | 600 V | D, E | 5 |
121-A-112, 121-A-122, 121-A-312, 121-A-412, 121-A-512, 121-A-116, 121-C-112, 121-D-112, 121-D-122, 121-D-116, 121-D-126 121-A-112 with suffix Z, 121-A-116 with suffix Z, 121-D-112 with suffix Z, 121-D-116 with suffix Z, 121-D-122 with suffix Z, 121-D-126 with suffix Z | 0.51 | 12 to 26 | 10.16 | 600 V | D, E | 5 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Spacing (mm) |
121-A-112, 121-A-122, 121-A-312, 121-A-412, 121-A-512, 121-A-116, 121-C-112, 121-D-112, 121-D-122, 121-D-116, 121-D-126, 121-A-112 with suffix Z, 121-A-116 with suffix Z, 121-D-112 with suffix Z, 121-D-116 with suffix Z, 121-D-122 with suffix Z, 121-D-126 with suffix Z | 0.51 | 12 to 26 | 300 V | B | 15 | 10.16 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Torque (N�m) | Spacing (mm) |
120-M-112, 120-M-212, 120-M-122, 120-M-222, 120-M-512, 120-M-612, 120-M-522, 120-M-622, 120-M-312, 120-M-412, 120-M-712, 120-M-812, 120-M-182, 120-M-282, 120-M-582, 120-M-682, 120-M-192, 120-M-292, 120-M-592, 120-M-692, 120-M-162, 120-M-262, 120-M-164, 120-M-264, 120-M-152, 120-M-252, 120-M-154, 120-M-254, 120-M-216, 120-M-226, 120-M-218, 120-M-228, 120-M-256, 120-M-266, 120-M-286, 120-M-296� | N/A | 300 V | B | 15 | N/A | 10 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Wire Range (AWG) | Torque (N�m) | Spacing (mm) | Max. Voltage | Spacing Group | Current (A max) |
120-M-112, 120-M-212, 120-M-122, 120-M-222, 120-M-512, 120-M-612, 120-M-522, 120-M-622, 120-M-312, 120-M-412, 120-M-712, 120-M-812, 120-M-182, 120-M-282, 120-M-582, 120-M-682, 120-M-192, 120-M-292, 120-M-592, 120-M-692, 120-M-162, 120-M-262, 120-M-164, 120-M-264, 120-M-152, 120-M-252, 120-M-154, 120-M-254, 120-M-216, 120-M-226, 120-M-218, 120-M-228, 120-M-256, 120-M-266, 120-M-286, 120-M-296 | N/A | N/A | 10 | 600 V | D, E | 5 |
121-M-112, 121-M-212, 121-M-122, 121-M-222, 121-M-512, 121-M-612, 121-M-522, 121-M-622, 121-M-312, 121-M-412, 121-M-712, 121-M-812, 121-M-182, 121-M-282, 121-M-582, 121-M-682, 121-M-192, 121-M-292, 121-M-592, 121-M-692, 121-M-162, 121-M-262, 121-M-164, 121-M-264, 121-M-152, 121-M-252, 121-M-154, 121-M-254, 121-M-216, 121-M-226, 121-M-218, 121-M-228, 121-M-256, 121-M-266, 121-M-286, 121-M-296 | N/A | N/A | 10.16 | 600 V | D, E | 5 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Wire Range (AWG) | Torque (N�m) | Max. Voltage | Spacing Group | Current (A max) | Spacing (mm) |
121-M-112, 121-M-212, 121-M-122, 121-M-222, 121-M-512, 121-M-612, 121-M-522, 121-M-622, 121-M-312, 121-M-412, 121-M-712, 121-M-812, 121-M-182, 121-M-282, 121-M-582, 121-M-682, 121-M-192, 121-M-292, 121-M-592, 121-M-692, 121-M-162, 121-M-262, 121-M-164, 121-M-264, 121-M-152, 121-M-252, 121-M-154, 121-M-254, 121-M-216, 121-M-226, 121-M-218, 121-M-228, 121-M-256, 121-M-266, 121-M-286, 121-M-296 | N/A | N/A | 300 V | B | 15 | 10.16 |
120-M-221-SMD, 120-M-211-SMD, 120-M-227-SMD | N/A | N/A | 300 V | B | 15 | 5 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Wire Range (AWG) | Torque (N�m) | Max. Voltage | Spacing Group | Current (A max) | Spacing (mm) |
121-M-217-SMD | N/A | N/A | 300 V | B | 15 | 5.08 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Wire Range (AWG) | Torque (N�m) | Max. Voltage | Spacing (mm) | Spacing Group | Current (A max) |
121-M-217-SMD | N/A | N/A | 300 V | 5.08 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
12
Models | Wire Range (AWG) | Torque (N�m) | Max. Voltage | Spacing (mm) | Spacing Group | Current (A max) |
120-M-221-SMD, 120-M-211-SMD, 120-M-227-SMD | N/A | N/A | 300 V | 5 | D, E | 10 |
(all types with or without suffix THR)
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-A
Plugs
12
Models | Max. Voltage | Spacing (mm) | Current (A max) | Wire Range (AWG) | Spacing Group | Torque (N�m) |
120-W-116, 120-W-11L, 120-W-11R, 120-W-171 | 300 V | 5 | 10 | 12-26 | B, D, E | 0.51 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-B
Plug-in Screw Terminal Blocks for mounting on a printed circuit board, for stranded or solid insulated copper conductors, 300 V or less, 130ºC
130
Models | Max. Voltage | Spacing (mm) | Torque (N�m) | Wire Range (AWG) | Spacing Group | Current (A max) |
130-A, 138-A | 300 V | 5 | 0.51 | 10 to 26 | B | 22 |
130-A, 138-A | 300 V | 5 | 0.51 | 10 to 26 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-B
130
Models | Max. Voltage | Spacing (mm) | Wire Range (AWG) | Spacing Group | Current (A max) | Torque (N�m) |
130-G, 130-H, 130-K, 130-M | 300 V | 5 | N/A | B | 22 | N/A |
130-P | 300 V | 5 | 14 to 26 | B, D, E | 15 | 0.51 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-B
130
Models | Max. Voltage | Spacing (mm) | Wire Range (AWG) | Torque (N�m) | Spacing Group | Current (A max) |
130-G, 130-H, 130-K, 130-M | 300 V | 5 | N/A | N/A | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
Series 14 Minilift Screw Terminal blocks for printed circuit boards, for stranded or solid insulated copper conductors, 300V or less, 130°C.
140, 141
Models | Max. Voltage | Spacing (mm) | Current (A max) | Torque (N�m) | Wire Range (AWG) | Spacing Group |
140-A-111, 140-A-121, 140-A-521-SMD, 140-A-524-SMD, 140-A-525-SMD, 140-A-SMD, 140-A-126-SMD, 140-B-111, 140-B-151, 140-B-153, 140-C-111, 140-E-111, 140-E-253, 140-E-271, 140-E-273, 141-A-111, 141-A-121, 141-B-111, 141-B-151, 141-B-153, 141-C-111, 141-E-111, 141-E-253, 141-E-271, 141-E-273 | 300 V | 5 | 15 | 0.51 | 14 to 30 | B |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
140, 141
Models | Spacing (mm) | Current (A max) | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing Group |
140-A-111, 140-A-121, 140-B-111, 140-B-151, 140-B-153, 140-C-111, 140-E-111, 140-E-253, 140-E-271, 140-E-273, 141-A-111, 141-A-121, 141-B-111, 141-B-151, 141-B-153, 141-C-111, 141-E-111, 141-E-253, 141-E-271, 141-E-273 | 5 | 15 | 0.51 | 14 to 30 | 150 V | B, C |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
140, 141
Models | Spacing (mm) | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) |
140-A-111, 140-A-121, 140-B-111, 140-B-151, 140-B-153, 140-C-111, 140-E-111, 140-E-253, 140-E-271, 140-E-273, 141-A-111, 141-A-121, 141-B-111, 141-B-151, 141-B-153, 141-C-111, 141-E-111, 141-E-253, 141-E-271, 141-E-273 | 5 | 0.51 | 14 to 30 | 150 V | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
140, 141
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing Group | Spacing (mm) | Current (A max) |
140-A-112, 140-A-122, 140-B-112, 140-B-152, 140-B-154, 140-C-112, 140-E-112, 140-E-254, 140-E-272, 140-E-274, 141-A-112, 141-A-122, 141-B-112, 141-B-152, 141-B-154, 141-C-112, 141-E-112, 141-E-254, 141-E-272, 141-E-274 | 0.51 | 14 to 30 | 300 V | B | 10 | 15 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
140, 141
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing (mm) | Spacing Group | Current (A max) |
140-A-112, 140-A-122, 140-B-112, 140-B-152, 140-B-154, 140-C-112, 140-E-112, 140-E-254, 140-E-272, 140-E-274, 141-A-112, 141-A-122, 141-B-112, 141-B-152, 141-B-154, 141-C-112, 141-E-112, 141-E-254, 141-E-272, 141-E-274 | 0.51 | 14 to 30 | 300 V | 10 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
140, 141
Models | Torque (N�m) | Wire Range (AWG) | Spacing (mm) | Max. Voltage | Spacing Group | Current (A max) |
140-A-112, 140-A-122, 140-B-112, 140-B-152, 140-B-154, 140-C-112, 140-E-112, 140-E-254, 140-E-272, 140-E-274, 141-A-112, 141-A-122, 141-B-112, 141-B-152, 141-B-154, 141-E-112, 141-E-254, 141-E-272, 141-E-274 | 0.51 | 14 to 30 | 10 | 150 V | B, C | 15 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-C
140, 141
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Spacing (mm) |
145-A-111, 145-A-121, 145-A-411, 145-C-111 | 0.51 | 26 to 12 | 300 V | B | 20 | 5 |
D, E | 10 | |||||
146-A-111, 146-A-121, 146-C-111 | 0.51 | 26 to 12 | 300 V | B | 20 | 5 |
D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
Multilift Screw�Terminal Blocks for mounting on a printed circuit board, for stranded or solid insulated copper conductors, 600 V or less, 130ºC:
15
Models | Torque (N�m) | Max. Voltage | Spacing Group | Current (A max) | Wire Range (AWG) | Spacing (mm) |
150-A-111, 150-A-121, 150-A-112, 150-A-122 | 0.51 | 300 V | B | 20 | 10-26 | 5,10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
15
Models | Torque (N�m) | Max. Voltage | Wire Range (AWG) | Spacing (mm) | Spacing Group | Current (A max) |
150-A-111, 150-A-121, 150-A-112, 150-A-122 | 0.51 | 300 V | 10-26 | 5,10 | D, E | 10 |
150-B-111, 150-B-151, 150-B-153, 150-B-112, 150-B-152, 150-B-154 | 0.51 | 300 V | 10-26 | 5,10 | B | 20 |
150-B-111, 150-B-151, 150-B-153, 150-B-112, 150-B-152, 150-B-154 | 0.51 | 300 V | 10-26 | 5,10 | D, E | 10 |
150-C-111, 150-C-112 | 0.51 | 300 V | 10-26 | 5,10 | B | 20 |
150-C-111, 150-C-112 | 0.51 | 300 V | 10-26 | 5,10 | D, E | 10 |
151-A-111, 151-A-121, 151-A-112, 151-A-122 | 0.51 | 300 V | 10-26 | 5. 08,10.16 | D, E | 10 |
151-B-111, 151-B-151, 151-B-153, 151-B-112, 151-B-152, 151-B-154 | 0.51 | 300 V | 10-26 | 5. 08,10.16 | B | 20 |
151-B-111, 151-B-151, 151-B-153, 151-B-112, 151-B-152, 151-B-154 | 0.51 | 300 V | 10-26 | 5. 08,10.16 | D, E | 10 |
151-C-111, 151-C-112 | 0.51 | 300 V | 10-26 | 5. 08,10.16 | B | 20 |
151-C-111, 151-C-112 | 0.51 | 300 V | 10-26 | 5. 08,10.16 | D, E | 10 |
152-A-111, 152-A-121, 152-A-211, 152-A-221 | 0.51 | 300 V | 10 to 26 | 7.5 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
15
Models | Torque (N�m) | Max. Voltage | Wire Range (AWG) | Spacing Group | Current (A max) | Spacing (mm) |
151-A-111, 151-A-121, 151-A-112, 151-A-122 | 0.51 | 300 V | 10-26 | B | 20 | 5. 08,10.16 |
152-A-111, 152-A-121, 152-A-211, 152-A-221 | 0.51 | 300 V | 10 to 26 | B | 20 | 7.5 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
15
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing Group | Current (A max) | Spacing (mm) |
152-A-112, 152-A-122, 152-A-212, 152-A-222 | 0.51 | 10 to 26 | 600 V | B, C | 20 | 15 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
15
Models | Torque (N�m) | Wire Range (AWG) | Current (A max) | Max. Voltage | Spacing Group | Spacing (mm) |
153-A-111, 153-A-121, 153-A-211, 153-A-221 | 0.51 | 10 to 26 | 20 | 300 V | B | 7.62 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
15
Models | Torque (N�m) | Wire Range (AWG) | Max. Voltage | Spacing (mm) | Spacing Group | Current (A max) |
153-A-111, 153-A-121, 153-A-211, 153-A-221 | 0.51 | 10 to 26 | 300 V | 7.62 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-D
15
Models | Torque (N�m) | Wire Range (AWG) | Spacing Group | Max. Voltage | Current (A max) | Spacing (mm) |
153-A-112, 153-A-122, 153-A-212, 153-A-222 | 0.51 | 10 to 26 | B, C | 600 V | 20 | 15.24 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-E
Screw�Terminal Blocks for mounting on a printed circuit board, for stranded or solid insulated copper conductors, 300 V or less, 130ºC:
18
Models | Current (A max) | Wire Range (AWG) | Max. Voltage | Spacing Group | Torque (N�m) | Spacing (mm) |
180-A-111, 180-A-121 | 20 | 12 to 24 | 300 V | B | 0.4 | 5 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-E
18
Models | Wire Range (AWG) | Max. Voltage | Torque (N�m) | Spacing (mm) | Spacing Group | Current (A max) |
180-A-111, 180-A-121 | 12 to 24 | 300 V | 0.4 | 5 | D, E | 10 |
181-A-111, 181-A-121 | 12 to 24 | 300 V | 0.4 | 5.08 | D, E | 10 |
182-A-111, 182-A-121 | 12 to 24 | 300 V | 0.4 | 7.5 | D, E | 10 |
183-A-111, 183-A-121 | 12 to 24 | 300 V | 0.4 | 7.62 | D, E | 10 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-E
18
Models | Wire Range (AWG) | Max. Voltage | Torque (N�m) | Spacing Group | Current (A max) | Spacing (mm) |
180-A-112, 180-A-122 | 12 to 24 | 300 V | 0.4 | B, C | 20 | 10 |
181-A-112, 181-A-122 | 12 to 24 | 300 V | 0.4 | B, C | 20 | 10.16 |
183-A-111, 183-A-121 | 12 to 24 | 300 V | 0.4 | B | 20 | 7.62 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-E
18
Models | Wire Range (AWG) | Max. Voltage | Torque (N�m) | Current (A max) | Spacing Group | Spacing (mm) |
181-A-111, 181-A-121 | 12 to 24 | 300 V | 0.4 | 20 | B | 5.08 |
182-A-111, 182-A-121 | 12 to 24 | 300 V | 0.4 | 20 | B | 7.5 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
PART-F
21
Models | Max. Voltage | Current (A max) | Wire Range (AWG) | Spacing Group | Torque (N�m) | Spacing (mm) |
210-A, �210-A-SMD, 210-A-126-SMD | 300 V | 10 | 16-30 | B | 0.22 | 3.5 |
211-A | 300 V | 10 | 16-30 | B | 0.22 | 3.81 |
Notes:
- These terminal blocks are certified for use in other certified equipment where the acceptability of the combination is to be determined by the Canadian Standards Association.
- Terminal blocks specified for group designation D shall be used only in or with industrial control equipment where the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, 5A at 301-600V, or the maximum current rating, whichever is less.
Contact an
Expert

We’re always here to help. Let’s talk.
We’re here to answer your questions and help you get started right away. Call or send us a message anytime.