Codes & Standards - Purchase
Examples of such appliances are washing machines for communal use in blocks of flats or in launderettes. As far as is practicable, this standard deals with the common hazards presented by washing machines that are encountered by all persons in and around the home. However, in general, it does not take into account:
– persons (including children) whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
– children playing with the appliance.
Attention is drawn to the fact that:
– for washing machines intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary;
– in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to:
– washing machines intended exclusively for industrial purposes (ISO 10472-2);
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– washing machines incorporating steam generating devices in which steam is produced at a pressure exceeding 50 kPa.
This eighth edition cancels and replaces the seventh edition published in 2008, Amendment 1: 2011 and Amendment 2:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– requirements for steam generators in 3.1.9, 3.6.101, 19.101, 22.106, 22.107;
– additional definitions for washing machine types in 3.5.101,3.5.102, 3.5.103;
– revised temperature limits for external accessible surfaces in 11.3 and 11.8;
– revised test procedure for the spillage test in 15.2;
– additional requirements for appliances that are controlled by programmable electronic circuits that limit the number of heating elements and motors from being energised at the same time, Subclause 22.108.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.