Preface
This is the harmonized ANCE, CSA Group, and UL standard for Cable management systems – Cable ties for electrical installations. It is the third edition of NMX-J-623-ANCE, CSA C22.2 No. 62275, and UL 62275. This edition of NMX-J-623-ANCE, CSA C22.2 No. 62275 and UL 62275 supersedes the previous edition published October 14, 2016.
This harmonized standard is based on IEC Publication 62275: third edition, Cable management systems – Cable ties for electrical installations, issued August 2018. IEC 62275 is copyrighted by the IEC.
This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.
Scope
This document specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations.
1DV.1 D2 Modify Clause 1 by replacing the first paragraph with the following:
This Standard specifies requirements for metallic, non-metallic, and composite cable ties and their associated fixing devices and integral assemblies used for the management and support of wiring systems in electrical installations in accordance with the Canadian Electrical Code (CE Code), Part I, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA 70, in the United States of America.
Cable ties and associated fixing devices can also be suitable for other applications and where so used, additional requirements can apply.
This document does not contain requirements that evaluate any electrical insulation properties of the cable tie or mechanical protection of the cables provided by the cable tie.
This document contains requirements for the mechanical interface of an adhesive fixing device to a solid surface. It does not consider the mechanical behaviour of the solid surface in itself.
This document does not consider the mechanical interface, for example the mounting screw, of a fixing device other than adhesive to a solid surface.
1DV.2 D2 Modify Clause 1 by deleting the last paragraph and adding the following note:
NOTE 1DV: This Standard considers the mechanical securement means of a fixing device to a surface when the means for securing is provided with the fixing device or is part of the fixing device, i.e., the push mount for an integral fixing device (See 9.7.1, 9.7.2, and 9.7.3).