Mechanical refrigeration systems:
The 11th edition of CSA B52 provides minimum requirements for the design, construction, installation, inspection, and maintenance of mechanical refrigeration systems. It contains recommendations and best practices and is not considered law until it is adopted by a jurisdiction. The standard applies to all refrigeration systems installed, whether in new or existing premises, to systems that undergo a substitution of refrigerant, and to parts that are replaced in or added to the system. With numerous updates and changes, this edition of the Code contributes significantly to further minimizing the risk of personal injury.
B52-13 Revisions Include:
This is the eleventh edition of CSA B52, Mechanical refrigeration code. It supersedes the previous editions published in 2005, 1999, 1995, 1992, 1991, 1983, 1977, 1965, 1951, and 1939.
The 11th edition of this Standard provides the minimum requirements for the design, construction, installation, inspection, and maintenance of the mechanical refrigeration systems, and is complemented by the practical implementation guidance B52 Handbook, helping to minimize the risk of personal injury. The Code applies to all refrigeration systems installed, whether in new or existing premises, to systems that undergo a substitution of refrigerant, and to parts that are replaced in or added to the system.
Changes to this edition include:
a) Clause 2 has been has been updated to add the following definitions:
i) Automated control;
ii) Fade-out vessel;
iii) Gas cooler;
iv) Manual control;
v) Pressure-regulating relief valve;
vi) Primary refrigerant;
vii) Secondary refrigerant;
ix) Subcritical system;
xii) Thermal relief device (or thermal expansion relief device);
xiii) Transcritical system; and
xiv) Triple point;
b) Updates to Clause 126.96.36.199.3;
c) Updates to Clauses 5.5.1, 5.6, 5.7.1, and 5.8.1, addition of Clause 188.8.131.52(c);
d) The addition of a note to Clause 6.3 and an update to Clause 6.3(d);
e) Updates to Clauses 184.108.40.206, the addition of Clause 220.127.116.11;
f) Updates to Clause 7.2.3 to include
i) renumbering of Clauses 18.104.22.168.1, 22.214.171.124.2, and 126.96.36.199 of the 2005 edition; and
ii) the addition of Clauses 188.8.131.52, 184.108.40.206.1, and 220.127.116.11.2;
g) Updates to Clause 7.2.4,;
h) Updates to Table 6;
i) The addition of Clause 18.104.22.168;
j) Updates to Clauses 8.1, 8.2, 8.3, 8.4.1, 8.4.3, and the addition of Clause 8.4.4;
k) Updates to Annex I;
l) The addition of Annex J;
m) The addition of Annex K; and
n) The addition of Annex L.
This Standard contains recommendations only and does not have the force of law until adopted officially by a jurisdiction. The regulatory authorities having jurisdiction, including those that have adopted this Standard, should be consulted on the extent of such adoption, as the Standard could have been adopted with exemptions or with additional requirements.
The purpose of this Standard is to minimize the risk of personal injury by providing minimum requirements for the design, construction, installation, inspection, and maintenance of the mechanical refrigeration systems and volatile direct refrigeration systems specified in Clauses 1.2.1 and 1.2.2.
Note: This Standard does not directly address protection of property and preservation of the environment.
Except as specified in Clause 1.2.3, this Standard applies to the design, construction, installation, inspection, and maintenance of every refrigeration system as provided for by the Act (as defined in Clause 3) and identified in this Standard.
This Standard applies to
a) all refrigeration systems installed subsequent to its adoption. This includes refrigeration systems installed in a new or existing premises. It also applies to all premises, including the machinery room if required, in which a refrigeration system is to be installed;
b) refrigeration systems that undergo a substitution of refrigerant in a premises defined in Item (a); and
c) those parts of a refrigeration system that are replaced in, or added to, systems installed prior to its adoption.
Note: When adding or replacing parts (see Item (c)), consideration should be given to the premises requirements of Item (a).
This Standard does not apply to the following:
a) the use of water or air as a refrigerant;
b) bulk-storage gas tanks not permanently connected to a refrigeration system;
c) refrigeration systems installed on railroad cars, motor vehicles, motor-drawn vehicles, aircraft, or ships; and
d) refrigeration systems used for air conditioning in private residences.
1.3 Mandatory language
In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.
1.4 Units of measurement
The values given in SI (metric) units are this Standard. The values given in parentheses are for information only. A list of conversion factors is provided in Annex D. Pressure, unless otherwise stated, is expressed in kilopascals above atmospheric pressure, i.e., gauge pressure.
An update to this product is available.
To receive notifications when an amendment, new edition or update is available to your standard no matter how you purchased it, please register on the Standards Update Service. After registering, enter the List ID for the relevant standard. The List ID can be found in the “CSA Standards Update” section within the first few pages of the standard you’ve purchased. Once notified, you can then update your standard accordingly.
PDF Format Purchased from the CSA Store
If you have purchased or subscribed to a standard from the CSA Store in PDF format, login to your CSA OnDemandTM account to access the updated PDF.
Paper Format Purchased or Purchased from Reseller
If you have purchased a paper copy of the standard from the CSA Store or purchased a standard in paper or PDF format from one of our resellers, login to the Standards Update Service to download the updates in PDF format.
eBook Format Purchased
If you have purchased a standard in eBook format, login to the CSA Reader App to download the updated version of the standard.