Codes & Standards - Subscribe
CSA ISO/IEC/IEEE 8802-3:21
Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet (Adopted ISO/IEC/IEEE 8802-3:2021, third edition, 2021-02)
Product Details
CSA Preface
Standards development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the SCC Mirror Committee (SMC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC.
For brevity, this Standard will be referred to as CSA ISO/IEC/IEEE 8802-3 throughout.
This Standard supersedes CAN/CSA-ISO/IEC/IEEE 8802-3:18 (adopted ISO/IEC/IEEE 8802-3:2017).
The International Standard was reviewed by the CSA TCIT under the jurisdiction of the CSA Strategic Steering Committee on Information and Communications Technology and deemed acceptable for use in Canada. This Standard has been formally approved, without modification, by the Technical Committee and has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.
Scope
This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) provide an architectural and optional implementation interface to selected Physical Layer entities (PHY). The Physical Layer encodes frames for transmission and decodes received frames with the modulation specified for the speed of operation, transmission medium and supported link length. Other specified capabilities include: control and management protocols, and the provision of power over selected twisted pair PHY types.
CSA ISO/IEC/IEEE 8802-3:21/A2:22
Amendment 2:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 2: Physical layer and management parameters for power over Ethernet over 4 pairs (Adopted amendment 2:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A8:22
Amendment 8:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 8: Physical layer specifications and management parameters for 2.5 Gb/s, 5 Gb/s, and 10 Gb/s automotive electrical ethernet (Adopted amendment 8:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A7:22
Amendment 7:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 7: Physical layer and management parameters for 400 Gb/s over multimode fiber (Adopted amendment 7:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A3:22
Amendment 3:2022 to CAN/CSA-ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 3: Media access control parameters for 50 Gb/s and physical layers and management parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s operation (Adopted amendment 3:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A1:22
Amendment 1:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 1: Physical layer specifications and management parameters for 2.5 Gb/s and 5 Gb/s operation over backplane (Adopted amendment 1:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A5:22
Amendment 5:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 5: Physical layers specifications and management parameters for 10 Mb/s operation and associated power delivery over a single balanced pair of conductors (Adopted amendment 5:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A6:22
Amendment 6:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 6: Maintenance #13: Power over ethernet over 2 pairs (Adopted amendment 6:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A9:22
Amendment 9:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 9: Physical layer specifications and management parameters for 25 Gb/s and 50 Gb/s passive optical networks (Adopted amendment 9:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21/A4:22
Amendment 4:2022 to CSA ISO/IEC/IEEE 8802-3:21, Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet - Amendment 4: Physical layers and management parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s operation over single-mode fiber (Adopted amendment 4:2021 to ISO/IEC/IEEE 8802-3:2021)
CSA ISO/IEC/IEEE 8802-3:21
Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet (Adopted ISO/IEC/IEEE 8802-3:2021, third edition, 2021-02)
CAN/CSA-ISO/IEC/IEEE 8802-3J:18
Amendment 10:2020 to CAN/CSA-ISO/IEC/IEEE 8802-3:18, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Standard for Ethernet - Amendment 10: Media access control parameters, physical layers, and management parameters for 200 Gb/s and 400 Gb/s operation (Adopted amendment 10:2019 to ISO/IEC/IEEE 8802-3:2017)
CAN/CSA-ISO/IEC/IEEE 8802-3H:18
Amendment 8:2020 to CAN/CSA-ISO/IEC/IEEE 8802-3:18, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Standard for Ethernet - Amendment 8: Physical layer and management parameters for power over data lines (PoDL) of single balanced twisted-pair ethernet (Adopted amendment 8:2018 to ISO/IEC/IEEE 8802-3:2017)
CAN/CSA-ISO/IEC/IEEE 8802-3I:18
Amendment 9:2020 to CAN/CSA-ISO/IEC/IEEE 8802-3:18, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Standard for Ethernet - Amendment 9: Physical layer specifications and management parameters for 1000 Mb/s operation over plastic optical fiber (Adopted amendment 9:2018 to ISO/IEC/IEEE 8802-3:2017)
CAN/CSA-ISO/IEC/IEEE 8802-3K:18
Amendment 11:2020 to CAN/CSA-ISO/IEC/IEEE 8802-3:18, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Standard for Ethernet - Amendment 11: Physical layer and management parameters for serial 25 Gb/s ethernet operation over single-mode fiber (Adopted amendment 11:2019 to ISO/IEC/IEEE 8802-3:2017)
CAN/CSA-ISO/IEC/IEEE 8802-3F:18
Amendment 6:2020 to CAN/CSA-ISO/IEC/IEEE 8802-3:18, Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Standard for Ethernet - Amendment 6: Physical layer specifications and management parameters for ethernet passive optical networks protocol over coax (Adopted amendment 6:2018 to ISO/IEC/IEEE 8802-3:2017)