Codes & Standards - Purchase
CAN/CSA-C191-13 (R2022)
View Access for this document is only available for viewers in Canada
Product Details
Preface
This is the fifth edition of CSA C191, Performance of electric storage tank water heaters for domestic hot water service. It supersedes the previous editions, published in 2004 and 2000 under the title, Performance of Electric Storage Tank Water Heaters for Household Service.
Technological changes since the publication of the previous edition of this Standard have led to the updating of clauses dealing with element Watts densities, test procedures, and standby loss levels. The wooden testing platform has been replaced with concrete.
CSA acknowledges that the development of this Standard was made possible, in part, by the financial support of BC Hydro, the Canadian Electricity Association, Conserve Nova Scotia, Hydro-Québec, Manitoba Hydro, Natural Resources Canada, and the Ontario Ministry of Energy.
This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard.
This Standard was prepared by the Subcommittee on Water Heaters, under the jurisdiction of the Technical Committee on Residential Equipment and the Strategic Steering Committee on Performance, Energy Efficiency, and Renewables, and has been formally approved by the Technical Committee.
This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.
Scope
1.1 General
This Standard specifies requirements related to hot water delivery, minimum standby performance, heater element ratings, and marking of electric storage tank water heaters.
1.2 Tank capacity
This Standard applies to stationary storage tank water heaters that have a rated capacity of 50 to 454 L (11 to 100 gal) and are intended for use with pressure systems in residential premises and similar locations. For convenience, the term water heater is used in this Standard to refer to such heaters.
1.3 Mandatory language
In CSA Standards, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements. Legends to equations and figures are considered requirements.
1.4 Units of measurement
The values given in SI (metric) units are the standard. The values given in parentheses are for information only. All measurements in gallons refer to imperial gallons.
An update to this product is available.
To receive notifications when an amendment, new edition or update is available to your standard no matter how you purchased it, please register on the Standards Update Service. After registering, enter the List ID for the relevant standard. The List ID can be found in the “CSA Standards Update” section within the first few pages of the standard you’ve purchased. Once notified, you can then update your standard accordingly.
PDF Format Purchased from the CSA Store
If you have purchased or subscribed to a standard from the CSA Store in PDF format, login to your CSA OnDemandTM account to access the updated PDF.
Paper Format Purchased or Purchased from Reseller
If you have purchased a paper copy of the standard from the CSA Store or purchased a standard in paper or PDF format from one of our resellers, login to the Standards Update Service to download the updates in PDF format.
Request Copyright Permissions