Codes & Standards - Purchase
CAN/CSA-M12003-2-09 (R2014)
Product Details
CSA Preface
This is the first edition of CAN/CSA-M12003-2, Agricultural and forestry tractors - Roll-over protective structures on narrow-track wheeled tractors - Part 2: Rear-mounted ROPS, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 12003-2 (second edition, 2008-08-01).
Scope
This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics.
- A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).
- A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle.
- A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
Request Copyright Permissions
To order this product please contact us
GST REG No R119441681
QST REG No R1006017360
