Nous utilisons des témoins pour créer une expérience d'utilisation du site Web plus sécuritaire et plus efficace pour nos clients. Pour plus d'information sur les témoins et sur la façon de les désactiver, consultez la page sur notre Politique de confidentialité.
En savoir plus
Centre de préférences en matière de confidentialité
Veuillez gérer vos choix de témoins en activant ou en désactivant les touches à bascule de consentement sous Objectifs ci-dessous.
Vous pouvez modifier vos préférences en tout temps, tel que décrit dans notre Politique sur les témoins. Politique de cookies
This is the first edition of CSA C900.3, Heat meters - Part 3: Data exchange and interfaces, which is an adoption without modification of the identically titled CEN (European Committee for Standardization) Standard EN 1434-3 (first edition, 1997-02).
Scope
This European standard applies to heat meters, that is to instruments intended for measuring the heat which, in a heat-exchange circuit, is absorbed or given up by a liquid called the energy-conveying liquid. The meter indicates heat in legal units.
Electrical safety requirements are not covered by this standard.
Part 3 specifies the data exchange between a meter and a read-out device (POINT / POINT communication). For these applications using the optical readout head and the CL interface, the EN 61 107 protocol is recommended.
Further stipulations are set out for the data communication between several meters and one master unit in a local network (MULTI-POINT communication). This can be done with a few meters with a hand held master unit by using the inductive interface on the Meter-Bus (in the following called the M-Bus).
For bigger networks with up to 250 meters, a master unit with AC mains supply is necessary to control the M-Bus. For these applications a protocol according to EN 60870-5 is recommended.
Login or Register
View Access for this document is only available for viewers in Canada