C22.2 NO. 250.7-07 (R2017)
Extra-Low-Voltage Landscape Lighting Systems
détails du produit
Preface
This is the first edition of CSA C22.2 No. 250.7, Extra-low-voltage landscape lighting systems. This Standard is one of a series of Standards issued under the Canadian Electrical Code, Part II. This Standard replaces the extra-low-voltage landscape lighting system requirements of TIL B-58B, Landscape Lighting Systems.
Scope
1.1
This Standard applies to extra-low-voltage landscape lighting systems and associated components that are intended for cord-connected, direct plug-in, or permanent connection to a branch circuit of not more than 150 volts-to-ground in accordance with the Canadian Electrical Code, Part I.
1.2
This Standard only covers extra-low-voltage landscape lighting systems where the maximum output circuit is 300 VA or 25 A, whichever is less, from each of the secondary circuits operating at not more than 30 V rms or 42.4 V peak.
1.3
Extra-low-voltage landscape lighting systems covered by this Standard are intended for gardens, walkways, patio areas, or similar outdoor locations, and for specific indoor locations such as atriums and shopping malls in accordance with the marking on the product.
1.4
This Standard applies to the following associated components:
(a) the isolating-type power supply
(b) one or more luminaire assemblies of the incandescent, fluorescent, LED, or HID type
(c) flexible cable and associated connectors intended for use in the secondary circuit
1.5
The values given in SI (metric) units are the standard. Where values are given in parentheses, they are for information only.
1.6
In CSA Standards, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; should is used to express a recommendation or that which is advised but not required; may is used to express an option or that which is permissible within the limits of the standard; and can is used to express possibility or capability.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
An update to this product is available.
To receive notifications when an amendment, new edition or update is available to your standard no matter how you purchased it, please register on the Standards Update Service. After registering, enter the List ID for the relevant standard. The List ID can be found in the “CSA Standards Update” section within the first few pages of the standard you’ve purchased. Once notified, you can then update your standard accordingly.
PDF Format Purchased from the CSA Store
If you have purchased or subscribed to a standard from the CSA Store in PDF format, login to your CSA OnDemandTM account to access the updated PDF.
Paper Format Purchased or Purchased from Reseller
If you have purchased a paper copy of the standard from the CSA Store or purchased a standard in paper or PDF format from one of our resellers, login to the Standards Update Service to download the updates in PDF format.
eBook Format Purchased
If you have purchased a standard in eBook format, login to the CSA Reader App to download the updated version of the standard.