Codes et normes - Achat
ANSI Z21.91-2007
Ventless Firebox Enclosures for Gas-Fired Unvented Decorative Room Heaters
SKU: 2418568
Publié par CSA Group
Année de publication 2007
66 pages
Withdrawn
détails du produit
Preface
This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of ventless firebox enclosures for gas-fired decorative type unvented room heaters. It is the result of years of experience in the manufacture, testing, installation, maintenance, inspection and research on unvented gas-fired heating appliances designed for the utilization of gas. There are risks of injury to persons inherent in some appliances that, if completely eliminated, would defeat the utility of the appliance. The provisions in this Standard are intended to reduce such risks while retaining the normal function of the appliance.
Nothing in this standard is to be considered in any way as indicating a measure of quality beyond compliance with the provisions it contains. It is designed to allow compliance of ventless firebox enclosures for gas-fired decorative type unvented room heaters, the safety construction and performance of which may exceed the various provisions specified herein. In its preparation, recognition has been given to possibilities of improvement through ingenuity of design. As technical advances take place, revisions may become necessary. When they are believed desirable, recommendations or suggestions should be forwarded to the Chairman of Z21/83 Committee, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131. A proposal form is provided in the back of this document.
Safe and satisfactory operation of ventless firebox enclosures for gas-fired decorative type unvented room heaters depends to a great extent upon its proper installation, use and maintenance. It should be installed, as applicable, in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54; the (U.S.) Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or when such standard is not applicable, Manufactured Home Installations, ANSI/NCSBCS A225.1 or the Standard for Manufactured Home Installations, Sites, and Communities, ANSI/NFPA 501A, manufacturers' installation instructions, and local municipal building codes.
Users of this American National Standard are advised that the devices/products/activities within its scope may be subject to regulation at the Federal, state or local level. Users are strongly urged to investigate this possibility through appropriate channels. In the event of a conflict with this standard, the Federal, state or local regulation should be followed.
This publication represents a basic standard for safe operation, substantial and durable construction, and acceptable performance of ventless firebox enclosures for gas-fired decorative type unvented room heaters. It is the result of years of experience in the manufacture, testing, installation, maintenance, inspection and research on unvented gas-fired heating appliances designed for the utilization of gas. There are risks of injury to persons inherent in some appliances that, if completely eliminated, would defeat the utility of the appliance. The provisions in this Standard are intended to reduce such risks while retaining the normal function of the appliance.
Nothing in this standard is to be considered in any way as indicating a measure of quality beyond compliance with the provisions it contains. It is designed to allow compliance of ventless firebox enclosures for gas-fired decorative type unvented room heaters, the safety construction and performance of which may exceed the various provisions specified herein. In its preparation, recognition has been given to possibilities of improvement through ingenuity of design. As technical advances take place, revisions may become necessary. When they are believed desirable, recommendations or suggestions should be forwarded to the Chairman of Z21/83 Committee, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131. A proposal form is provided in the back of this document.
Safe and satisfactory operation of ventless firebox enclosures for gas-fired decorative type unvented room heaters depends to a great extent upon its proper installation, use and maintenance. It should be installed, as applicable, in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54; the (U.S.) Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or when such standard is not applicable, Manufactured Home Installations, ANSI/NCSBCS A225.1 or the Standard for Manufactured Home Installations, Sites, and Communities, ANSI/NFPA 501A, manufacturers' installation instructions, and local municipal building codes.
Users of this American National Standard are advised that the devices/products/activities within its scope may be subject to regulation at the Federal, state or local level. Users are strongly urged to investigate this possibility through appropriate channels. In the event of a conflict with this standard, the Federal, state or local regulation should be followed.