Raccords et appareils
Aperçu
Essais et certification de raccords et d’appareils
Le Groupe CSA vous aide à évaluer la conformité de vos produits de plomberie avec les exigences applicables en matière de sécurité et de rendement. Ce sont les normes américaines et canadiennes en vigueur concernant les effets sur la santé et les essais de rendement prévues dans l’International Plumbing Code (IPC), le Uniform Plumbing Code (UPC) et le Code national de la plomberie (CNP) du Canada.
Où que vous fabriquiez vos robinets, vannes, douches, lavabos, éviers et autres raccords et appareils de plomberie, nous offrons des services qui évoluent avec votre industrie, des délais d’exécution rapides, un travail de qualité et une expertise technique.
Le Groupe CSA met à l’essai et certifie divers raccords et appareils selon les normes de la CSA, de l’ASSE, de l’IAPMO, de l’ASME et de l’ASTM et le Code of Federal Regulations des États-Unis. Nous évaluons la sécurité et le rendement des appareils conformément aux normes décrites ci-dessous.
Capacités d’essai des raccords
| Norme | Description de la norme |
| Série A112 de l’ASME et série harmonisée de l’ASME/la CSA | |
| ASME A112.4.14/CSA B125.14 | Manually operated valves for use in plumbing systems |
| ASME A112.14.1 | Backwater valves |
| ASME A112.18.1/CSA B125.1 | Plumbing supply fittings |
| ASME A112.18.2/CSA B125.2 | Plumbing waste fittings |
| ASME A112.18.3 | Performance requirements for backflow protection devices and systems in plumbing fixture fittings |
| ASME A112.18.6/CSA B125.6 | Flexible water connectors |
| ASME A112.19.5/CSA B45.15 | Flush valves and spuds for water closets, urinals, and tanks |
| ASME A112.1002/CSA B125.12 | Anti-siphon fill valves for water closet tanks |
| Série de l’ASSE et série harmonisée de l’ASSE/l’ASME/la CSA | |
| ASSE 1001 | Performance requirements for atmospheric type vacuum breakers |
| ASSE 1002/ASME A112.1002/CSA B125.12 | Anti-siphon fill valves for water closet tanks |
| ASSE 1003 | Performance requirements for water pressure reducing valves for domestic water distribution systems |
| ASSE 1005 | Performance requirements for water heater drain valves 3/4 inch size |
| ASSE 1010 | Performance requirements for water hammer arresters |
| ASSE 1011 | Performance requirements for hose connection vacuum breakers |
| ASSE 1012 | Performance requirements for backflow preventers with an intermediate atmospheric vent |
| ASSE 1013 | Performance requirements for reduced pressure principle backflow preventers and reduced pressure principle fire protection backflow preventers |
| ASSE 1014 | Performance requirements for backflow prevention devices for hand-held showers |
| ASSE 1015 | Performance requirements for double check backflow prevention assemblies and double check fire protection backflow prevention assemblies |
| ASSE 1016/ASME A112.1016/CSA B125.16 | Automatic compensating valves for individual showers and tub/shower combinations |
| ASSE 1017 (NOUVELLE) | Performance requirements for temperature actuated mixing valves for hot water distribution systems |
| ASSE 1018 | Performance requirements for trap seal primer valves - potable water supplied |
| ASSE 1019 | Performance requirements for vacuum breaker wall hydrants, freeze resistant, automatic draining type |
| ASSE 1020 | Performance requirements for pressure vacuum breaker assembly |
| ASSE 1022 | Backflow preventer |
| ASSE 1024 | Performance requirements for dual check backflow preventers |
| ASSE 1025 | Performance requirements for diverters for plumbing faucets with hose spray, anti-siphon type, residential applications |
| ASSE 1032 (NOUVELLE) | Performance Requirements for Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post Mix Type |
| ASSE 1035 | Performance requirements for laboratory faucet backflow preventers |
| ASSE 1037/ASME A112.1037/CSA B125.37 | Performance requirements for pressurized flushing devices for plumbing fixtures |
| ASSE 1044 | Performance requirements for trap seal primer - drainage types and electric design types |
| ASSE 1052 | Performance requirements for hose connection backflow preventers |
| ASSE 1055 | Performance requirements for chemical dispensers |
| ASSE 1056 | Performance requirements for spill resistant vacuum breaker assemblies |
| ASSE 1057 (NOUVELLE) | Performance Requirements for Freeze Resistant Sanitary Yard Hydrants with Backflow Protection |
| ASSE 1061 | Performance requirements for push-fit fittings |
| ASSE 1062 | Performance requirements for temperature actuated, flow reduction (TAFR) valves for individual supply fittings |
| ASSE 1066 | Performance requirements for individual pressure balancing in-line valves for individual fixture fittings |
| ASSE 1069 | Automatic temperature control mixing valves |
| ASSE 1070/ASME A112.1070/CSA B125.70 | Performance requirements for water temperature limiting devices |
| ASSE 1071 | Performance requirements for temperature actuated mixing valves for plumbed emergency equipment |
| Série B64 de la CSA | |
| CSA B64.0 | General requirements and test methods for vacuum breakers and backflow preventers |
| CSA B64.1.1 | Casse-vide atmosphériques (C-VA) |
| CSA B64.1.2 | Casse-vide à pression (C-VP) |
| CSA B64.2 | Casse-vide à raccordement de flexible (C-VRF) |
| CSA B64.2.1 | Casse-vide à raccordement de flexible (C-VRF) à vidange manuelle |
| CSA B64.2.1.1 | Casse-vide à raccordement de flexible (C-VRF) à deux clapets de retenue |
| CSA B64.2.2 | Casse-vide à raccordement de flexible (C-VRF) à vidange automatique |
| CSA B64.3 | Dispositifs antirefoulement à deux clapets de retenue à orifice de décharge (DArOD) |
| CSA B64.3.1 | Dispositifs antirefoulement à deux clapets de retenue à orifice de décharge pour carbonateur (DArODC) |
| CSA B64.4 | Dispositif antirefoulement à pression réduite (DArPR) |
| CSA B64.4.1 | Dispositifs antirefoulement à pression réduite pour les systèmes de protection incendie |
| CSA B64.5 | Dispositifs antirefoulement à deux clapets de retenue et robinets (DAr2CR) |
| CSA B64.5.1 | Dispositifs antirefoulement à deux clapets de retenue et robinets pour les systèmes de protection incendie (DAr2CRI) |
| CSA B64.6 | Dispositifs antirefoulement à deux clapets de retenue (DAr2C) |
| CSA B64.6.1 | Dispositifs antirefoulement à deux clapets de retenue pour les systèmes de protection incendie (DAr2CI) |
| CSA B64.7 | Casse-vide pour robinet de laboratoire (C-VRL) |
| CSA B64.8 | Dispositif antirefoulement à deux clapets de retenue à ventilation intermédiaire (DAr2CV) |
| CSA B64.9 | Dispositif antirefoulement à un clapet de retenue pour les systèmes de protection incendie (DAr1CI) |
| Séries B125 et 356 de la CSA | |
| CSA B125.3 | Plumbing fittings |
| CSA B356 | Water pressure reducing valves for domestic water supply systems |
| Série Z de la CSA | |
| CSA Z240.3.2 | Plumbing requirements for recreational vehicles (except section 9) |
| CSA Z240.3.2-14 (NOUVELLE) | Véhicules récréatifs |
| Série de l’IAPMO/l’ANSI | |
| IAPMO/ANSI Z1157 | Ball valves |
| Séries PS et TS de l’IAPMO | |
| IAPMO PS 50 (NOUVELLE) | Flush Valves with Dual Flush Device for Water Closets or Water Closet Tank with an Integral Flush Valves with a Dual Flush Device |
| IAPMO PS 69 | Bath waste and overflow assemblies with tub filler spout |
| IAPMO PS 72 (NOUVELLE) | Valves with Atmospheric Vacuum Breakers |
| IAPMO TS 8 | Backflow preventer |
| IAPMO TS 25 | Reinforced Hoses for Recreational Vehicle Pressurized Water Systems |
| IAPMO TS 28 | Water Pressure Reducing Regulators for Use in Recreational Vehicles |
| IAPMO TS 30 | Termination valves for use in recreational vehicles |
| Série de la NSF/de l’ANSI | |
| NSF/ANSI 14 | Plastics Piping System Components and Related Materials |
| NSF/ANSI 169 | Special Purpose Food Equipment and Devices |
| NSF/ANSI 372 | Drinking water system components - Lead Content |
| NSF/ANSI 42 | Drinking Water Treatment Units - Aesthetic Effects |
| NSF/ANSI 44 | Residential Cation Exchange Water Softeners |
| NSF/ANSI 53 | Drinking Water Treatment Units - Health Effects |
| NSF/ANSI 55 | Ultraviolet Microbiological Water Treatment Systems |
| NSF/ANSI 58 | Reverse Osmosis Water Treatment Systems |
| Autre | |
| ANSI/ISEA Z358.1 | Emergency eyewash and shower equipment |
Capacités d’essai des appareils
| Norme | Description de la norme |
| Série A112 de l’ASME et série harmonisée de l’ASME/de la CSA | |
| ASME A112.3.4 /CSA B45.9 | Macerating Toilet Systems and Waste Pumping systems for plumbing fixtures |
| ASME A112.6.1M | Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use |
| ASME A112.6.2 | Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tank |
| ASME A112.6.7 | Sanitary Floor Sinks |
| ASME A112.19.12 (NOUVELLE) | Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems |
| ASME A112.19.15 (NOUVELLE) | Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors |
| ASME A112.19.19 (NOUVELLE) | Vitreous China Nonwater Urinals |
| ASME A112.3.4/CSA B45.9 (NOUVELLE) | Macerating toilet systems and waste pumping systems for plumbing fixtures - Second Edition |
| ASME A112.4.2/CSA B45.16 (NOUVELLE) | Personal hygiene devices for water closets |
| ASME A112.6.1M (NOUVELLE) | Floor-affixed Supports for Off-The-Floor Plumbing Fixtures For Public Use |
| ASME A112.6.2 (NOUVELLE) | Closet Carriers & Fixture Supports |
| ASME A112.6.7 (NOUVELLE) | Floor Sinks |
| ASME A112.16.19 | Vitreous China Nonwater Urinals |
| ASME A112.19.1/CSA B45.2 | Enameled cast iron and enameled steel plumbing fixtures |
| ASME A112.19.2/CSA B45.1 | Ceramic plumbing fixtures |
| ASME A112.19.3/CSA B45.4 | Stainless steel plumbing fixtures |
| ASME A112.19.7/CSA B45.10 | Hydromassage bathtub systems |
| Série B45 de la CSA et série harmonisée de la CSA/de l’IAPMO | |
| CSA B45.5/IAPMO Z124 | Plastic plumbing fixtures |
| CSA B45.6 | Non-recirculating toilets, vacuum toilets, and waste-holding tanks for use in recreational vehicles |
| CSA B45.7 | Self-contained, recirculating, chemically controlled toilets for use in recreational vehicles |
| CSA B45.11/ IAPMO Z401 (NOUVELLE) | Glass plumbing fixtures |
| CSA B45.12 / IAPMO Z402 (NOUVELLE) | Aluminum and Copper Plumbing |
| CSA B45.8/IAPMO Z403 | Terrazzo, concrete, and natural stone plumbing fixtures |
| Série Z de la CSA | |
| CSA Z240.3.2 | Plumbing requirements for recreational vehicles (except section 9) |
| CSA Z240.3.2-14 (NOUVELLE) | Véhicules de camping |
| Série de l’IAPMO/l’ANSI | |
| IAPMO/ANSI Z124.8 | Plastic liners for bathtubs and shower receptors |
| Série IGC de l’IAPMO | |
| IAPMO IGC 132 (NOUVELLE) | Vacuum Toilet Systems for Recreational Vehicles |
| Série TS de l’IAPMO | |
| IAPMO TS 1 | Mechanical seal toilets with or w/out integral wastewater tank for use in recreational vehicles |
| IAPMO TS 2 | Waste holding tanks |
| IAPMO TS 4 | Pressure and non-pressure potable water tanks for use in recreational vehicles |
| IAPMO TS 11 | Non-metallic fixtures |
| IAPMO TS 20 | Stainless steel plumbing fixtures for use in recreational vehicles |
| IAPMO TS 22 | Porcelain enameled formed steel plumbing fixtures |
| IAPMO TS 23 | Detachable liquid waste holding tanks |
Pour économiser l’eau
- WaterSenseMD de l’EPA des États-Unis – Normes
- Programme d’efficacité énergétique du département de l’Énergie des États-Unis
- Règlement sur l’efficacité énergétique de RNCan
| Économie d’eau | |
| EPA WaterSense® | WaterSense® Specification for Flushometer-Valve Water Closets |
| EPA WaterSense® | High Efficiency Toilet Specification |
| EPA WaterSense® | High Efficiency Urinals Specification |
| EPA WaterSense® | High Efficiency Lavatory Faucet Specification |
| EPA WaterSense® | High Efficiency Showerhead Specification |
| 10 CFR, partie 431, sous-partie O 431.264 | Uniform test method to measure flow rate and spray force of commercial pre-rinse spray valves |
| Règlement sur l’efficacité énergétique de RNCan, partie 2, section 13 | Pulvérisateurs de prérinçage commerciaux |
Comment pouvons-nous vous aider?
Contacter un
expert
Nous sommes toujours là pour aider.
Nous sommes ici pour répondre à vos questions et vous aider à démarrer immédiatement. Appelez-nous ou envoyez un message à tout moment.
