Numéro de classe La description
6802-02
PLUMBING WASTE FITTINGS - Plumbing Fixtures

COVERAGE:

Plumbing fixture waste fittings of size NPS-2 and smaller.

REQUIREMENTS:

ASME A112.18.2/CSA B125.2 Plumbing Waste Fittings

MARKING:

Fittings complying with this Standard shall be marked with:

  • the manufacturer’s recognized name, trademark, or other mark
  •  in the case of private labeling, the name, trademark, or other
    mark of the client for whom the fitting was manufactured
  •  CSA Mark

The marking method consists of casting or stamping into the body of the
fitting, electro etching on trim, or an equally permanent marking applied at the
factory. Where a label is used, it shall be a CSA listed Type B label or
equivalent.

All marking required by CSA must be permanent, legible, and visible after
installation of the fitting.

Packaging shall be marked with:

  •  the manufacturer’s recognized name, trademark, or other mark
  •  in the case of private labeling, the name, trademark, or other
    mark of the client for whom the fitting was manufactured
  •  the model number
  •  CSA Mark

Products shall be installed in Accordance with the Local Code of the Authority
Having Jurisdiction.

/cl